Narrow By:

• Manufacturer: Bridgeport

• Product Type

  

  • #2 Conduit Hanger W/ Bolt, Nut (1)
  • #2 Stnless Hanger W/Bolt (1)
  • #2-1/2 Conduit Hanger W/ Bolt (1)
  • #3 Conduit Hanger W/ Bolt, Nut (1)
  • #3 Stnless Hanger W/Bolt (1)
  • #4 Stnless Hanger W/Bolt (1)
  • #5 Stnless Hanger W/Bolt (1)
  • 1 1/2" Plastic Bushing (1)
  • 1 1/2" Threaded Hub (1)
  • 1 1/4" Comp. Conn. Ins. (1)
  • 1 1/4" Rigid Pull Elbow (1)
  • 1 1/4" Threaded Hub (1)
  • 1" 3-Piece Coupling, Alum (1)
  • 1" Clamp Back, Alum (1)
  • 1" Comb. Cuplg LT to RGD (1)
  • 1" Emt Nail Strap (1)
  • 1" Fe LT Conn 90 Deg (1)
  • 1" Non-Metallic Split Bush (1)
  • 1" RGD Pipe Strap (1)
  • 1" RGD Pipe Strap Alum (1)
  • 1" RT Combo. CPLG. (1)
  • 1" Sealing Locknut (1)
  • 1" Set Screw Comb. CPLG. (1)
  • 1" SPLT GND BSH Lug 4-14 Awg (1)
  • 1" SS Conn. Ins. (1)
  • 1" Steel Expansion Coupling (1)
  • 1" Steel Grounding Locknut (1)
  • 1" Threaded Hub (1)
  • 1" Usa Emt Steel SS Conn (1)
  • 1" Usa Emt Steel SS CPLG (1)
  • 1" Usa Steel Emt Comp Conn (1)
  • 1" X4 Trans Emt/Cable CPLG (1)
  • 1/2" - 3/4" Universal Strap (1)
  • 1/2" 3-Piece Coupling, Alum (1)
  • 1/2" Comb. Cuplg LT to RGD (1)
  • 1/2" Conduit Clamp (1)
  • 1/2" Emt Nail Strap (1)
  • 1/2" Emt Pull Elbow (1)
  • 1/2" E-Z Lock Assy (1)
  • 1/2" Fe LT Conn 90 Deg (1)
  • 1/2" MC/FMC Connector (1)
  • 1/2" Mighty-Bite Emt Conn. (1)
  • 1/2" Mighty-Bite Emt Cuplg (1)
  • 1/2" Mighty-Bite Insul Conn (1)
  • 1/2" Plastic Bushing, 150C (1)
  • 1/2" Push-Emt MSRT Conn (1)
  • 1/2" Push-Emt MSRT Coupling (1)
  • 1/2" Sealing Locknut (1)
  • 1/2" Set Screw Comb. CPLG. (1)
  • 1/2" Spacing Connector (1)
  • 1/2" SS Conn. Ins. Zinc (1)
  • 1/2" Steel Grounding Locknut (1)
  • 1/2" Threaded Hub (1)
  • 1/2" Usa Emt Steel SS Conn (1)
  • 1/2" Usa Emt Steel SS CPLG (1)
  • 1/2" Usa Steel Comp Conn (1)
  • 1/2-1 Strapgrnd.Clamp Zinc (1)
  • 1/4" Coaxial/Tube Strap (1)
  • 1-1/2 SS Conn. Ins. Zinc (1)
  • 1-1/2" - 1/2" Reducing Bushing (1)
  • 1-1/2" 3-Piece Coupling Alum (1)
  • 1-1/2" Comb. Cuplg LT to RGD (1)
  • 1-1/2" Combo. CPLG. (1)
  • 1-1/2" Comp. Conn. Ins. Zinc (1)
  • 1-1/2" Emt/Flex Coupling (1)
  • 1-1/2" Non-Metallic Split Bush (1)
  • 1-1/2" RGD Pipe Strap (1)
  • 1-1/2" Sealing Locknut (1)
  • 1-1/2" SPLT GND BSH #14-1/0awg (1)
  • 1-1/2" SPLT GND BSH #4-14 Awg (1)
  • 1-1/2" Steel Expansion Couplin (1)
  • 1-1/2" Steel Grounding Locknut (1)
  • 1-1/2" Steel Raintight Conn (1)
  • 1-1/2" Usa Emt Steel SS Conn (1)
  • 1-1/2" Usa Emt Steel SS CPLG (1)
  • 1-1/2" Usa Steel Emt Comp Conn (1)
  • 1-1/4 SS Conn. Ins. Zinc (1)
  • 1-1/4" - 1/2" Reducing Bushing (1)
  • 1-1/4" 3-Piece Coupling Alum (1)
  • 1-1/4" Comb. Cuplg LT to RGD (1)
  • 1-1/4" Combo. CPLG. (1)
  • 1-1/4" Conduit Clamp (1)
  • 1-1/4" Non-Metallic LQDT (1)
  • 1-1/4" Non-Metallic Split Bush (1)
  • 1-1/4" Plastic Bushing (1)
  • 1-1/4" Sealing Locknut (1)
  • 1-1/4" SPLT GND BSH #14-1/0awg (1)
  • 1-1/4" Steel Expansion Couplin (1)
  • 1-1/4" Steel Grounding Locknut (1)
  • 1-1/4" Steel Raintight Conn (1)
  • 1-1/4" Steel Raintight CPLG (1)
  • 1-1/4" Usa Emt Steel SS Conn (1)
  • 1-1/4" Usa Emt Steel SS CPLG (1)
  • 1-1/4" Usa Steel Emt Comp Conn (1)
  • 1-1/4" Usa Steel Emt Comp CPLG (1)
  • 2 1/2" Sealing Locknut (1)
  • 2 GRND. Bush. Ins. 14-1/0 Mall (1)
  • 2" 3-Piece Coupling Alum (1)
  • 2" Comb. Cuplg LT to RGD (1)
  • 2" Combo. CPLG. (1)
  • 2" Ins Rain Tight Compression (1)
  • 2" Non-Metallic LQDT (1)
  • 2" Non-Metallic Split Bush (1)
  • 2" Steel Expansion Coupling (1)
  • 2" Steel Grounding Locknut (1)
  • 2" Usa Emt Steel SS Conn (1)
  • 2" Usa Emt Steel SS CPLG (1)
  • 2" Usa Steel Emt Comp Conn (1)
  • 2-1/2 GRND.Bush.Ins. 6-250 (1)
  • 2-1/2 SPLT GND BSH W/LG 14-1/0 (1)
  • 2-1/2 to 1" Reduc WSHR (1)
  • 2-1/2 to 1/2" Reduc WSHR (1)
  • 2-1/2 to 3/4" Reduc WSHR (1)
  • 2-1/2" Bushing Penny (1)
  • 2-1/2" Non-Metallic Split Bush (1)
  • 2-1/2" Offset Nipple (1)
  • 2-1/2" Plastic Bushing 150C (1)
  • 2-1/2" Steel Expansion Couplin (1)
  • 2-1/2" Steel Grounding Locknut (1)
  • 2-1/2" Steel Raintight Conn (1)
  • 2-1/2" Steel Raintight Conn, I (1)
  • 2-1/2" Steel Raintight CPLG (1)
  • 3- 1/2" - 3" Reducing Bushing (1)
  • 3 1/2" Comp. Conn. (1)
  • 3 1/2" Comp. Conn. Ins. (1)
  • 3 1/2" Comp. CPLG. (1)
  • 3 1/2" Pipe Strap (1)
  • 3 1/2" Sealing Locknut (1)
  • 3 to 1-1/2" Reduc WSHR (1)
  • 3 to 1-1/4" Reduc WSHR (1)
  • 3" 3-Piece Coupling Alum (1)
  • 3" Bushing Penny (1)
  • 3" Comp. Conn. Ins. (1)
  • 3" GRND. Bush. Ins. Zinc 6-250 (1)
  • 3" GRND.Bush.Ins.14-1/0 Mall (1)
  • 3" Non-Metallic Split Bush (1)
  • 3" Offset Nipple (1)
  • 3" Pipe Strap (1)
  • 3" Plastic Bushing 150 C (1)
  • 3" Sealing Locknut (1)
  • 3" SPLT GND BSH #6-250MCM (1)
  • 3" SPLT GND BSH W/Lug #14-1/0 (1)
  • 3" Steel Expansion Coupling (1)
  • 3" Steel Grounding Locknut (1)
  • 3" Steel Raintight Conn (1)
  • 3" Steel Raintight Conn, Ins (1)
  • 3" Steel Raintight CPLG (1)
  • 3/4 SS Conn. Ins. Zinc (1)
  • 3/4" - 1" Universal Strap (1)
  • 3/4" Box Support (1)
  • 3/4" Clamp Back (1)
  • 3/4" Clamp Back Alum (1)
  • 3/4" Comb. Cuplg LT to RGD (1)
  • 3/4" Concrete Slab Elbow-Zinc (1)
  • 3/4" Emt Pull Elbow Coup (1)
  • 3/4" Emt to 1/2" Flex Coupling (1)
  • 3/4" Extra Long Conduit Nipple (1)
  • 3/4" Fe LT Conn (1)
  • 3/4" Fe LT Conn 90 Deg (1)
  • 3/4" Mighty-Bite Emt Conn (1)
  • 3/4" Mighty-Bite Emt Cuplg (1)
  • 3/4" Mighty-Bite Insul Conn (1)
  • 3/4" Plastic Bushing, 150C (1)
  • 3/4" Push-Emt MSRT Conn (1)
  • 3/4" Push-Emt MSRT Coupling (1)
  • 3/4" Rain Tight Extd Thread (1)
  • 3/4" RGD Pipe Strap (1)
  • 3/4" RGD Pipe Strap Alum (1)
  • 3/4" Sealing Locknut (1)
  • 3/4" Set Screw Comb. CPLG. (1)
  • 3/4" SPLT GND BSH Lug 4-14 Awg (1)
  • 3/4" Steel Expansion Coupling (1)
  • 3/4" Usa Emt Steel SS Conn (1)
  • 3/4" Usa Emt Steel SS CPLG (1)
  • 3/8" Coaxial/Tube Strap (1)
  • 3/8" Conduit Locknut (1)
  • 3/8" DBL Barrel Duplex Connect (1)
  • 3-1/2 to 2" Reduc WSHR (1)
  • 3-1/2 to 2-1/2" Reduc WSHR (1)
  • 3-1/2 to 3" Reduc WSHR (1)
  • 3-1/2" Cond. Nipple Zinc (1)
  • 3-1/2" Pipe Strap, Two Hole (1)
  • 3-1/2" Plastic Bushing 150 C (1)
  • 3-1/2" Set Screw Conn. Steel (1)
  • 3-1/2" Set Screw Conn. Zinc (1)
  • 3-1/2" Set Screw CPLG. Zinc (1)
  • 3-1/2" Steel Comp Conn (1)
  • 3-1/2" Steel Comp CPLG (1)
  • 3-1/2" Steel Expansion Couplin (1)
  • 3-1/2" Steel Ins Comp Conn (1)
  • 3-1/2" Steel Raintight Conn (1)
  • 3-1/2" Steel Raintight Conn, I (1)
  • 3-1/2" Steel Raintight CPLG (1)
  • 4 to 2-1/2" Reduc WSHR (1)
  • 4 to 3-1/2" Reduc WSHR (1)
  • 4" - 3-1/2" Reducing Bushing (1)
  • 4" Bushing Penny (1)
  • 4" Comp. Conn. Ins. (1)
  • 4" GRD.Bush.Ins. 6-250 Zinc (1)
  • 4" Non-Metallic Split Bush (1)
  • 4" Pipe Strap (1)
  • 4" Plastic Bushing 150 C (1)
  • 4" SQ Flat Cover (1)
  • 4" Steel Grounding Locknut (1)
  • 4" Steel Raintight Conn, Ins (1)
  • 4" Threaded Hub (1)
  • 5" Plastic Bushing (1)
  • 5" Ul Conduit Locknut (1)
  • 6" Ul Conduit Locknut (1)
  • Box Support (1)
  • Clamp (9)
  • Combination Coupling (1)
  • Compression Connector (6)
  • Compression Coupling (2)
  • Conduit Chased Nipple (9)
  • Conduit Coupling (1)
  • Conduit Hanger (14)
  • Conduit Hanger With Bolt (14)
  • Connector (14)
  • Coupling (5)
  • Emt Compression Connector (23)
  • Emt Compression Coupling (23)
  • EMT Concrete Tight Connector (5)
  • EMT Concrete Tight DC Connector (9)
  • Emt Insulating Bushing (10)
  • Emt Set Screw Connector (6)
  • Emt Set Screw Coupling (15)
  • EMT SS Diecast Connector (9)
  • EMT/FMC Combination Coupling (2)
  • Hanger (2)
  • Insulated Grounding Bushing (10)
  • Insulating Bushing (7)
  • Locknut (13)
  • Nail Type Strap (1)
  • Offset Nipple (6)
  • One Hole Strap (7)
  • Pipe Strap (16)
  • Plastic Bushing (10)
  • Plug (6)
  • Pull Elbow (3)
  • Raintight Compression Coupling (5)
  • Raintight Connector (6)
  • Reducing Bushing (15)
  • Reducing Washer (22)
  • Set Screw EMT Connector (6)
  • Switch Box Support (1)
  • Two Hole Strap (6)
  • Wedge Grip, 2/0-4/0 Acsr, 2/0- (1)
  • Wedge Grip, 4-1/0 Acsr, 1-2/0 (1)
  • Wedge Grip, 6-4 Acsr, 4-1 AA (1)
  • Show More...

• Brand

  

  • Bridgeport (378)
  • Bridgeport Fittings (159)
  • Show More...

• Trade Size

  

  • #1 (1)
  • 0.375 (1)
  • 0.5 (17)
  • 0.75 (20)
  • 1 (42)
  • 1 in (11)
  • 1 to 1/2 in (2)
  • 1 to 3/4 in (2)
  • 1.25 (21)
  • 1.25 in (5)
  • 1.5 (26)
  • 1/2 (11)
  • 1/2 in (27)
  • 1/2 to 3/8 in (1)
  • -1/4 - 1/2 (1)
  • 1-1/2 (14)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 in (8)
  • 1-1/2 to 1 in (2)
  • 1-1/2 to 1/2 in (1)
  • 1-1/2 to 1-1/4 in (2)
  • 1-1/2 to 3/4 in (2)
  • 1-1/4 (11)
  • 1-1/4 in (9)
  • 1-1/4 to 1 in (2)
  • 1-1/4 to 1/2 in (1)
  • 1-1/4 to 3/4 in (2)
  • 2 (23)
  • 2 in (26)
  • 2 to 1 in (2)
  • 2 to 1/2 in (1)
  • 2 to 1-1/2 in (2)
  • 2 to 1-1/4 in (2)
  • 2 to 3/4 in (2)
  • 2 to 4 in (1)
  • 2.5 (19)
  • 2-1/2 (4)
  • 2-1/2 IN (10)
  • 2-1/2 to 1-1/2 in (1)
  • 2-1/2 to 1-1/4 in (1)
  • 2-1/2 to 2 in (2)
  • 3 (31)
  • 3 1/2 - 3 (1)
  • 3 in (3)
  • 3 to 2 in (1)
  • 3 to 2-1/2 in (2)
  • 3 to 4 in (1)
  • 3.5 (10)
  • 3/4 (10)
  • 3/4 in (27)
  • 3/4 to 1/2 in (2)
  • 3/4 to 3/4 in (1)
  • 3/4-1/2 (1)
  • 3/8 in (6)
  • 3-1/2 (9)
  • 3-1/2 in (6)
  • 4 (27)
  • 4 - 3-1/2 (1)
  • 4 in (4)
  • 5 (2)
  • 5 in (1)
  • 6 (1)
  • 6 in (1)
  • 9 in (1)
  • Show More...

• Finish

  

  • Ball burnish (114)
  • Ball Burnished (3)
  • Ball Burnished;Mirror Smooth (23)
  • Enamel (8)
  • Natural (6)
  • NO FINISH (47)
  • Powder Coat (1)
  • Zinc Electro Plated (1)
  • Zinc Electroplated (189)
  • Zinc Electro-Plated (22)
  • Show More...

• Material

  

  • Aluminum (4)
  • Aluminum/Stainless Steel (3)
  • Cast Zinc (2)
  • Die-Cast Zinc (23)
  • Malleable Iron (23)
  • Nylon (3)
  • Nylon Plastic (7)
  • Plastic (39)
  • Stainless Steel (6)
  • Steel (151)
  • Zinc Alloy (9)
  • Zinc Die Cast (78)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • ZINC PLATED STEEL (10)
  • Show More...

• Shape

  

  • Angle (7)
  • Hex (9)
  • Round (66)
  • Square (1)
  • Straight (16)
  • Show More...

• Length

  

  • 0.558 in (1)
  • 0.625 (1)
  • 0.743 in (1)
  • 0.75 (1)
  • 0.945 in (1)
  • 0.99 (1)
  • 1 in (2)
  • 1.062 (2)
  • 1.125 (1)
  • 1.13 in (1)
  • 1.1875 in (1)
  • 1.240 in (1)
  • 1.25 in (2)
  • 1.34 in (1)
  • 1.375 (1)
  • 1.38 in (1)
  • 1.41 in (1)
  • 1.44 in (1)
  • 1.440 in (1)
  • 1.5 (1)
  • 1.5 in (2)
  • 1.50 in (1)
  • 1.5045 in (1)
  • 1.525 in (1)
  • 1.541 (1)
  • 1.56 in (1)
  • 1.604 (1)
  • 1.62 in (1)
  • 1.625 (1)
  • 1.63 in (2)
  • 1.75 in (1)
  • 1.850 in (1)
  • 1.870 in (2)
  • 1.88 in (2)
  • 1.982 in (1)
  • 1-1/16 in (1)
  • 1-1/2 in (6)
  • 1-11/16 in (1)
  • 1-13/16 in (1)
  • 1-15/16 in (3)
  • 1-27/32 in (4)
  • 13/16 in (1)
  • 1-3/16 in (2)
  • 1-3/4 in (7)
  • 1-3/8 in (1)
  • 15/16 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (3)
  • 1-7/8 in (2)
  • 1-9/16 in (3)
  • 2 in (10)
  • 2.06 in (2)
  • 2.12 in (1)
  • 2.13 in (2)
  • 2.240 in (1)
  • 2.25 in (1)
  • 2.31 in (2)
  • 2.405 in (1)
  • 2.5 in (2)
  • 2.56 in (2)
  • 2.725 in (1)
  • 2.75 in (1)
  • 2.750 in (1)
  • 2.83 in (1)
  • 2.843 in (1)
  • 2.88 in (1)
  • 2.93 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (4)
  • 2-1/4 in (3)
  • 2-1/8 in (1)
  • 2-11/16 in (5)
  • 2-11/32 in (2)
  • 2-15/16 in (3)
  • 2-3/16 in (1)
  • 2-3/4 in (1)
  • 2-3/8 in (1)
  • 2-5/16 in (2)
  • 2-5/8 in (1)
  • 2-7/16 in (1)
  • 2-7/8 in (2)
  • 2-9/16 in (1)
  • 3 in (2)
  • 3.063 in (2)
  • 3.13 in (1)
  • 3.25 in (1)
  • 3.250 in (1)
  • 3.340 in (1)
  • 3.35 in (1)
  • 3.44 in (1)
  • 3.5 in (1)
  • 3.62 in (1)
  • 3.69 in (1)
  • 3.75 in (2)
  • 3.765 in (1)
  • 3-1/16 in (1)
  • 3-1/2 in (2)
  • 3-1/4 in (3)
  • 3-3/16 in (2)
  • 3-3/4 in (4)
  • 3-3/8 in (2)
  • 3-5/16 in (1)
  • 3-5/8 in (1)
  • 3-7/32 in (4)
  • 3-9/32 in (2)
  • 4 in (4)
  • 4.00 in (1)
  • 4.062 (1)
  • 4.5 in (1)
  • 4.56 (1)
  • 4.63 in (1)
  • 4.75 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/4 in (2)
  • 4-13/16 in (2)
  • 4-23/32 in (2)
  • 4-3/32 in (2)
  • 4-3/8 in (2)
  • 4-5/16 in (1)
  • 4-7/8 in (3)
  • 5-1/4 in (1)
  • 5-5/8 in (1)
  • 5-7/16 in (1)
  • 6 in (1)
  • 6.5 in (1)
  • 6-7/8 in (1)
  • 8 in (1)
  • Show More...

• Width

  

  • 0.525 in (1)
  • 0.537 in (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.635 in (1)
  • 0.75 in (4)
  • 0.88 in (2)
  • 0.953 in (1)
  • 1 in (3)
  • 1.205 in (1)
  • 1.21 in (1)
  • 1.218 in (1)
  • 1.23 in (1)
  • 1.24 in (1)
  • 1.25 in (2)
  • 1.468 in (1)
  • 1.470 in (1)
  • 1.875 in (1)
  • 1/2 in (2)
  • 1/4 in (1)
  • 1/8 in (2)
  • 11/16 in (1)
  • 1-1/2 in (2)
  • 1-1/4 in (10)
  • 1-15/16 in (1)
  • 13/16 in (4)
  • 1-3/16 in (1)
  • 1-3/8 in (2)
  • 1-5/16 in (1)
  • 1-5/8 in (3)
  • 1-9/16 in (1)
  • 2.125 in (1)
  • 2.656 in (1)
  • 2-1/2 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (1)
  • 2-3/16 in (1)
  • 2-3/8 in (2)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3/16 in (8)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-11/16 in (1)
  • 3-13/16 in (1)
  • 3-3/8 in (1)
  • 4-1/16 in (1)
  • 4-1/8 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 5/8 in (1)
  • 5-3/16 in (1)
  • 7/16 in (1)
  • 7/32 in (1)
  • 7/8 in (9)
  • 9/16 in (1)
  • 9/64 in (1)
  • Show More...

• For Use With

  

  • 1/2 in EMT;14/2 and 12/2 Romex Non-Metallic Cable (1)
  • AC/MC/MCI-A/HCF/HCFMCI-A/FMC .40-.62 Cable to Box/Enclosure (1)
  • Aluminum or Steel Electrical Metallic Tubing (9)
  • Box;Enclosure (32)
  • Connecting 14/2 to 10/3 Aluminum or Steel AC/MC Cable or 3/8” Flexible Metal Conduit to a Box/Enclosure. Patent Pending (2)
  • Connecting EMT to Box or Enclosure (6)
  • Electrical;Telecommunications Cable (6)
  • EMT and Rigid Conduit (8)
  • EMT and Rigid Conduit to Threaded Rod (16)
  • EMT Conduit (49)
  • EMT to Box or Enclosure (7)
  • EMT to Flexible Metal Conduit (1)
  • Fasten Threaded Connectors/Nipples to Box/Enclosure (1)
  • Fasten Threaded Rigid/IMC Conduit to Box/Enclosure (10)
  • Flexible Metal Conduit;EMT (2)
  • Join EMT to Box or Enclosure (6)
  • Locknut;Box or Connector (10)
  • Nonmetallic Type B Liquid Tight Conduit (2)
  • Offset the Axis of Raceway 3/4" (6)
  • Rigid and IMC Conduit (32)
  • Rigid Service Entrance Conduit to Box or Enclosure (1)
  • Rigid/IMC Conduit;Solar and other Outdoor Installations (1)
  • Secure Emt to Box or Enclosure (9)
  • Secure Steel EMT to Box or Enclosure;Concrete-Tight when Taped (6)
  • Steel and Aluminum EMT (6)
  • Steel and Aluminum EMT;Steel and Aluminum Rigid Conduit (3)
  • Steel;Aluminum EMT (3)
  • Steel;Aluminum Rigid Conduit (2)
  • Support EMT to Mounting Surface (2)
  • Support Metal Clad Cable (1)
  • Terminate Service Conduit to Cabinet (11)
  • Threaded Conduit (1)
  • To Join EMT to Box or Enclosure (29)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • Used to Join Steel Emt to Box or Enclosure;Concrete-Tight 1/2 in Thru 2 in Suitable for use with Steel or Aluminum Emt (9)
  • Show More...

• Diameter

  

  • 0.406 in (1)
  • 0.938 in (1)
  • 0.94 in (2)
  • 1 in (3)
  • 1 in (Inside);1-1/2 in (Outside) (1)
  • 1 in (Inside);1-11/16 in (Outside) (1)
  • 1 in (Inside);2-3/16 in (Outside) (1)
  • 1.065 in (1)
  • 1.08 in (1)
  • 1.19 in (2)
  • 1.312 in (2)
  • 1.44 in (3)
  • 1.478 in (1)
  • 1.562 in (1)
  • 1.69 in (1)
  • 1.878 in (1)
  • 1.88 in (2)
  • 1.880 in (1)
  • 1-1/16 in (5)
  • 1-1/16 in (Inside);1-3/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-1/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-1/16 in (Inside);3-1/4 in (Outside) (1)
  • 1-1/2 in (2)
  • 1-1/32 in (4)
  • 1-1/4 in (3)
  • 1-1/8 in (9)
  • 1-11/16 in (3)
  • 1-11/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-11/16 in (Inside);3-1/4 in (Outside) (2)
  • 1-13/16 in (1)
  • 1-15/16 in (5)
  • 1-15/16 in (Inside);2-7/8 in (Outside) (1)
  • 1-17/32 in (6)
  • 1-29/32 in (1)
  • 1-3/16 in (1)
  • 13/16 in (Inside);1-1/2 in (Outside) (1)
  • 13/16 in (Inside);1-1/8 in (Outside) (1)
  • 13/16 in (Inside);1-11/16 in (Outside) (1)
  • 13/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-3/4 in (3)
  • 1-3/8 in (7)
  • 1-3/8 in (Inside);2-1/4 in (Outside) (1)
  • 1-3/8 in (Inside);2-5/8 in (Outside) (1)
  • 1-3/8 in (Inside);3-1/4 in (Outside) (1)
  • 1-5/16 in (6)
  • 1-5/16 in (Inside);1-11/16 in (Outside) (1)
  • 1-5/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-7/16 in (2)
  • 1-7/8 in (2)
  • 1-9/16 in (2)
  • 1-9/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-9/32 in (2)
  • 2 in (3)
  • 2 in (Inside);3-1/4 in (Outside) (2)
  • 2.06 in (1)
  • 2.08 in (1)
  • 2.090 in (1)
  • 2.113 in (1)
  • 2.18 in (1)
  • 2.44 in (1)
  • 2.5 in (1)
  • 2.56 in (1)
  • 2.563 in (1)
  • 2.750 in (1)
  • 2.94 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (Inside);4-1/2 in (Outside) (2)
  • 2-1/2 in (Inside);5-1/2 in (Outside) (1)
  • 2-1/8 in (3)
  • 2-11/16 in (2)
  • 2-13/16 in (1)
  • 2-15/16 in (3)
  • 2-15/16 in (Inside);4-1/2 in (Outside) (1)
  • 2-3/16 in (1)
  • 2-3/8 in (4)
  • 2-5/16 in (Inside);3-1/2 in (Outside) (1)
  • 2-5/32 in (3)
  • 2-5/8 in (6)
  • 2-7/8 in (2)
  • 2-9/16 in (2)
  • 3.25 in (1)
  • 3.26 in (1)
  • 3.62 in (1)
  • 3.89 in (2)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-11/16 in (2)
  • 3-13/16 in (1)
  • 3-3/16 in (4)
  • 3-3/4 in (1)
  • 3-3/8 in (1)
  • 3-7/16 in (2)
  • 3-9/16 in (Inside);5-1/2 in (Outside) (1)
  • 4.25 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/32 in (2)
  • 4-1/8 in (1)
  • 4-13/16 in (5)
  • 4-5/16 in (4)
  • 4-5/8 in (1)
  • 5 in (2)
  • 5.25 in (1)
  • 5.75 in (1)
  • 5/8 in (Inside);1-1/8 in (Outside) (1)
  • 5/8 in (Inside);2-3/16 in (Outside) (1)
  • 5/8 in (Inside);7/8 in (Outside) (1)
  • 5-1/4 in (1)
  • 5-1/8 in (3)
  • 5-3/8 in (2)
  • 7/8 in (4)
  • 7/8 in (Inside);1-1/2 in (Outside) (1)
  • 7/8 in (Inside);1-3/4 in (Outside) (1)
  • 7/8 in (Inside);2-1/4 in (Outside) (1)
  • 7/8 in (Inside);2-5/8 in (Outside) (1)
  • 7/8 in (Inside);3-1/4 in (Outside) (1)
  • Show More...

• Connection Size

  

  • 1 in (4)
  • 1/2 in (3)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 2 in (2)
  • 2-1/2 in (2)
  • 3 in (2)
  • 3/4 in (3)
  • 4 in (2)
  • Show More...

• Application

  

  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (1)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (4)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (2)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (1)
  • Bridgeport Fittings Mighty-Seal® 3/4 inch EMT Connectors are used to connect a 3/4 inch EMT raceway to a box, device, or enclosure. The 251-MSRT 3/4 inch Mighty-Seal® connector is UL listed for use in wet locations. (1)
  • Bridgeport Fittings Mighty-Seal® product line is designed to provide quick and easy raintight connection to EMT raceways. Patented (2)
  • Bridgeport now offers a full line of EMT to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (3)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Insulated Throat - 90° C. Patented (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (7)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 4” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (1)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (5)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (4)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (3)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • Compression type steel couplings used to join two lengths of EMT. Concrete Tight. (1)
  • Concrete slab elbows for use in minimum 6" concrete poured or pre-fabricated slabs. (1)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1" Rigid Conduit (GRC & IMC) and 1" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1/2" Rigid Conduit (GRC & IMC) and 1/2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1-1/2" Rigid Conduit (GRC & IMC) and 1-1/2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1-1/4" Rigid Conduit (GRC & IMC) and 1-1/4" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 2" Rigid Conduit (GRC & IMC) and 2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 3/4" Rigid Conduit (GRC & IMC) and 3/4" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For making connection with protective armor of 4, 6, or 8 AWG copper conductor and ground pipe or grounding electrode. Also suitable for use with 1/2 Inch or 3/4 Inch copper water pipe. (1)
  • Galvanized Steel Reducing Washers Used in Pairs to Reduce Size of Knockout Holes in Box or Enclosure (22)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure. (9)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure.. (1)
  • Join EMT to flexible metal conduit. 282-DC is squeezetype for flexible metal conduit. Set screw type for EMT end (1)
  • Nail Type Strap to Support EMT to Mounting Surface (1)
  • Nail type strap to support EMT to mounting surface. (2)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • One hole strap for steel or Aluminum Tubing or Coaxial cable. (2)
  • Provides space between conduit and mounting surface. For use with Aluminum straps. (2)
  • Provides space between conduit and mounting surface. For use with Malleable Iron or Aluminum straps. (1)
  • Recommended Cable Types 14/2 to 10/2 .38-.59 Steel or Aluminum AC/MC/MCI-A and 3/8 Steel or Aluminum FMC. Simply Snap Cables into Connector and Snap Assembly into Electrical Box. no Tools Required Integral Internal Spring Steel Locking Tabs Fasten Cable (1)
  • Recommended cable types 14/2 to 10/2 with cable range O.D. Steel or Aluminum .38 to .59 AC/MC/MCIA and Steel or Aluminum 3/8" FMC. Simply snap cables into connector and snap assembly into electrical box. No tools required! Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. (1)
  • Recommended cable types used to connect AC/MC/MCIA .40-.62 cable to box or enclosure. (1)
  • Recommended Cable Types Used to Connect AC/MC/MCI-A, Diameter for 14/2 (0.43 in 0 Min) to 10/3 (0.62 in 0 Max) (1)
  • Recommended cable types used to connect steel interlocked, aluminum interlocked and aluminum corrugated metal clad cable, 1/2" FMC to box or enclosure. Insulator rated 105 degree C. Diameter for 10/4 (.62" 0 min) to 6/3 (.803" 0 max) (1)
  • Recommended cable types used to secure Steel or Aluminum Flexible Metal Conduit or Armored, Metal Clad Cable to box or enclosure. Diameter for .70 - .855. 8/3 - 6/3 AC/MC/MCI-A (1)
  • Recommended Cable Types With Steel or Aluminum 14/2 (0.43" 0 Min) to 10/3 (0.61" 0 Max) AC or MC Cable or 3/8 in Flexible Metal Conduit to Box or Enclosure (1)
  • Recommended Cable Types With Steel Or Aluminum 14/2 to 10/3 Ac Or Mc Cable, Or 3/8" Flexible Metal Conduit to Box Or Enclosure. Diameter For 14/2 (.43" 0 Min) to 10/3 (.61" 0 Max) (1)
  • Red fire alarm box cover to meet visual identification requirements for fire alarm installations. (1)
  • Reduce strain and sagging of overhead type ACSR Service Entrance Cable. Max load is 1000 lbs. (3)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Secure Conduit Perpendicular to Beam or Channel (4)
  • Serves as a short raceway between enclosures when used with a locknut. (1)
  • Set Screw Connector used to Join EMT to Box or Enclosure. 1/2" Thru 2" Furnished with Tri-Drive Slot/Phillips/Robertson Head Screws (1)
  • Set screw connector used to join EMT to box or enclosure. Insulated Throat 105degreeC (3)
  • Set screw type couplings used to join EMT to flexible metal conduit. (2)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight when taped. (1)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (6)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. (3)
  • Single Screw Beam Clamp Insulator Support With Two Threaded Holes (2)
  • Single screw beam clamp insulator support with two threaded holes. UL listed (3)
  • Snap-On Type Strap Used to Support Round Steel or Aluminum Metal Clad Cable (1)
  • Steel Locknut With PVC Seal Used to Provide Raintight Seal When Fastening Threaded Conduit to Unthreaded Opening in a Box or Enclosure (1)
  • Steel locknut with PVC seal used to provide raintight seal when fastening threaded conduit to unthreaded opening in a box or enclosure. (9)
  • steel plug used to cap unused knockout holes in box or enclosure. (6)
  • Steel Strap Used to Secure Rigid Conduit and IMC to Mounting Surface (7)
  • Straight connector for use with metallic liquid tight conduit. (1)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (3)
  • Support FS Box and Outdoor Lighting Fixture or Similar Devices, per NEC Article 370-23 (1)
  • Supporting 2 runs of AC/MC/FMC. Accomodates Steel and Aluminum AC/MC/FMC/MCIA with an outer diameter of 0.425 (14/2) to 0.61 (10/3) inches FMC in 3/8" trade size. Patented (1)
  • Telephone;Computer;Single or Multiple Voice Cables;Video or Data Cables (10)
  • The 250-MB is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 250-MBI is used to connect a properly deburred length of EMT raceway to a box, device, panelboard, or similar electrical enclosure. Simply push the fitting on to raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 251-MB is used to connect a properly deburred length of EMT raceway to a box or electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Dry locations only. Patented (1)
  • The 251-MBI is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 260-MB is used to couple two properly deburred lengths of 1/2" EMT raceway. Simply push the fitting on to the raceway with a slight twist. Remove the fitting by unthreading it from the conduit end. No tools are required. Dry Locations Only. Concrete Tight. Patented (1)
  • The 261-MB is used to couple two properly deburred lengths of 3/4" EMT raceway. Simply push the fitting on a raceway with a slight twist. Remove the fitting by unthreading it from the conduit end. No tools are required. Dry Locations Only. Concrete Tight. Patented (1)
  • The 4357-DC is used to securely join 1" EMT to three (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti short bushings (1)
  • The 4457-DC is used to securely join 1" EMT to four 14/2 to 10/3 (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti sh (1)
  • The one piece clamp back and strap secures both cable and conduit. The UCS-5075 secures 1/2" and 3/4" EMT, Rigid, IMC, PVC/Polyolefin Coated Rigid, PVC/Polyolefin Coated IMC, Metallic Liquid Tight, Nonmetallic Liquid Tight, FMC, and Schedule 40 and Schedule 80 PVC conduit, as well as .710" 0 to 1.10" 0 steel and aluminum AC/MC cable. (1)
  • The one piece clamp back and strap secures both cable and conduit. The UCS-75100 secures 3/4" and 1" EMT, Rigid, IMC, PVC/Polyolefin Coated Rigid, PVC/Polyolefin Coated IMC, Metallic Liquid Tight, Nonmetallic Liquid Tight, FMC, and Schedule 40 and Schedule 80 PVC conduit, as well as .925" 0 to 1.32" 0 steel and aluminum AC/MC cable. (1)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. (4)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (2)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface (2)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Available with or Without Bolt (5)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Strap Has Integral Threads (6)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. With Carriage Bolt and Nut (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertightnants from entering enclosure. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminium and Steel Rigid Conduit (1)
  • To Support Rigid Conduit and IMC to Mounting Surface (7)
  • To support rigid conduit and IMC to mounting surface. (8)
  • To support switch box in wallboard, installed in pairs. (1)
  • Used as a short raceway between two boxes. (1)
  • Used for connecting rigid or IMC to form 90 Degrees bend. Removable cover and neoprene gasket facilitate wire pulling. (1)
  • Used for Connecting Rigid or IMC to form 90° Bend. Removable Cover and Neoprene Gasket Facilitate Wire Pulling (3)
  • Used in Harsh Vibration Environments to Fasten Threaded Conduit to Unthreaded Opening in a Box or Enclosure (1)
  • Used in harsh vibration environments to fasten threaded conduit to unthreaded opening in a box or enclosure. (8)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 60610-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (4)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to connect EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to connect two lengths of EMT to form a 90degree bend. Removable Aluminum cover to facilitate wire pulling. (2)
  • Used to fasten threaded conduit to unthreaded opening in a box or enclosure. (1)
  • Used to fasten threaded connectors or nipples to box or enclosure. (2)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (12)
  • Used to join 1/2" EMT and up to two 14/2 and 12/2 Romex, Non-Metallic Cables. Two screw strap type for cable and a set screw type for EMT. (1)
  • Used to join 2 lengths of EMT. Concrete/Raintight. Patented (1)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT, Raintight. Concrete-Tight. Patented (4)
  • Used to join EMT to box or enclosure. Concrete tight/raintight (1)
  • Used to join EMT to box or enclosure. Concrete/Raintight (3)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (2)
  • Used to join EMT to box or enclosure. Concrete tight. (20)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (5)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. (1)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to join EMT to box or enclosure. Concrete/Raintight (1)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to join EMT to flexible metal conduit. 281-DC is squeeze type for flexible metal conduit. Set screw type for EMT end. (1)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. Insulator rated 105degree C. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 4" suitable for use with Steel or Aluminum EMT. (1)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. Insulator rated 105°C. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 2 in Suitable for use with Steel or Aluminum EMT;Wet Locations (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 4 in Suitable for use with Steel or Aluminum EMT;Wet Locations (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete/Raintight. Patented (3)
  • Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT. (10)
  • Used to join two lengths of EMT. Concrete tight when taped. (6)
  • Used to join two lengths of EMT. Concrete-tight. (10)
  • Used to join two lengths of EMT. Concrete-tight/Raintight. Patented (6)
  • Used to join two lengths of Steel EMT. Concrete-tight 2" thru 4" suitable for steel and aluminum EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (1)
  • Used to join two lengths of threaded conduit. (7)
  • Used to offset the axis of raceway 3/4 ". (6)
  • Used to offset the axis of raceway 3/4" between enclosure runs. (2)
  • Used to reduce the size of internal female threads. 1/2" thru 2" steel, 2 1/2" thru 4" malleable iron. (4)
  • Used to secure conduit perpendicular to beam or channel. (2)
  • Used to Secure EMT to Box or Enclosure (8)
  • Used to secure EMT to box or enclosure. 1/2" thru 1" concrete-tight, 1-1/4" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with steel or aluminum EMT. Plastic insulator rated 105degreeC. (1)
  • Used to secure EMT to box or enclosure. Insulated Throat 105degreeC (1)
  • Used to secure steel EMT to box or enclosure. concrete tight when taped (2)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (3)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (1)
  • Used to secure to box or enclosure. (1)
  • Used to secure two lengths of steel EMT. (6)
  • Used to Support EMT to Mounting Surface (12)
  • Used to support EMT to mounting surface. (3)
  • Used to support FS box, outdoor lighting fixture, or similar devices, per NEC article 370-23. (1)
  • Used With Locknut to Terminate Service Conduit to Cabinet (10)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. (2)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. (10)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Wet Location (9)
  • When Used with a Locknut, Conduit Nipples Serve as a Short Raceway Between Enclosures (9)
  • When used with a locknut, conduit nipples serve as a short raceway between enclosures. (1)
  • Show More...

• Connection Type

  

  • Combination (4)
  • Compression (9)
  • E-Z Lock(R) (2)
  • Rigid (6)
  • Screw-On (2)
  • Set Screw (11)
  • Snap-In (3)
  • Threaded (35)
  • Show More...

• Thread Length

  

  • 0.552 in (1)
  • 1 in (1)
  • 1/2 in (8)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-1/4 in (1)
  • 1-1/8 in (2)
  • 3/4 in (1)
  • 5/8 in (7)
  • 7/16 in (3)
  • 7/8 in (1)
  • Show More...

• Special Features

  

  • Ball Burnished, mirror smooth finish (7)
  • Black Color, rated 150 degree C. (10)
  • Comes with Carriage Bolt and Nut (3)
  • Concrete Tight (25)
  • Concrete Tight/Raintight (2)
  • Concretetight (9)
  • Concrete-Tight (58)
  • Concrete-tight when taped (4)
  • Concrete-tight/Raintight (4)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (26)
  • Conduit & Fitting Locknut (1)
  • Conduit and Fitting Locknut (1)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (11)
  • Extra Long (1") Threads, perfect for use with Solar combiner boxes that have increased wall thicknesses. (1)
  • For Rigid and IMC Conduit (19)
  • For use in Wet Locations in Canada Only (9)
  • For use with Malleable Iron Straps (1)
  • Furnished with 2-way Phillips/Slotted Head Screw (8)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (13)
  • Furnished with Tri-Drive Slotted/Phillips/Robertson Screw (5)
  • Grounding Lug Wire Capacity # 14 - #4 (4)
  • Grounding Lug Wire Capacity # 4 - #1/0 (3)
  • Grounding Lug Wire Capacity # 6 - #250 (1)
  • Grounding Lug Wire Capacity # 6 - 250 MCM (1)
  • Grounding Lug Wire Capacity #14 - #1/0 (2)
  • Grounding Lug Wire Capacity #14 - #1/0;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (7)
  • Grounding Lug Wire Capacity #14 - #4;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (3)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • Hcf/Hcfmci-A (6)
  • Heavy duty material and zinc plating thickness (13)
  • Hole Diameter 3/16" (2)
  • Hole diameter is 0.265" (5)
  • Hole diameter is 0.39" (1)
  • Installed in pairs (1)
  • Insulated Bushing (10)
  • Insulator Rated 105 °C (5)
  • Knockout Bushing (6)
  • Malleable Iron Body with Steel Ferrule (6)
  • Max load is 1000 lbs (3)
  • One Hole Strap (7)
  • Plain Finish (7)
  • Plastic Insulator Rated 105 Degree C (6)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (1)
  • Provides raintight seal (10)
  • Raintight (7)
  • Removable aluminum cover to facilitate wire pulling (2)
  • Removable cover and neoprene gasket facilitate wire pulling (4)
  • Right Angle (5)
  • Rounded Surface of Bushing (10)
  • Rounded surface of bushing prevents damage to wire insulation (1)
  • Secure Conduit Perpendicular to Beam or Channel (1)
  • Set Screw type transition fitting ideal for commercial and institutional facilities. (2)
  • Single Screw Beam Clamp Insulator (3)
  • suitable for EMT/Rigid/IMC (3)
  • Suitable for use with 1/2 inch or 3/4 inch copper water pipe (1)
  • Tap Size (UNC) 3/8 - 16 (1)
  • Tap Size (UNC) 5/16 - 18 (1)
  • Tapered threads (NPT) and furnished plastic K.O. seal provide "raintight" resistance. (1)
  • Tapered Threads (NPT) and Furnished Plastic KO Seal Provide "Raintight" Resistance (1)
  • The Dual Internal sealing rings create a raintight seal. (2)
  • Trade size 1/2" - 3/4" steel, 1 hole, one piece clamp back and strap combination. (1)
  • Trade size 3/4" - 1" steel, 1 hole, one piece clamp back and strap combination. (1)
  • Twice the strap in half the time! Position the duplex conector over the 2 cables and set the screw. (1)
  • Two Hole Strap (9)
  • UL Type 4 Water Tight (6)
  • Use to compensate plus or minus 2" lateral movement of conduit in dry locations (5)
  • Used in Harsh Vibration Environment (1)
  • Used in harsh vibration environments (8)
  • With Bolt (14)
  • Show More...

• Hub Size

  

  • 3/4 in (1)
  • 3/8 in (2)
  • Show More...

• Package Quantity

  

  • 1 CA;100 PK (1)
  • 1 CT;10 PK (4)
  • 1 CT;12 PK (7)
  • 1 CT;15 PK (1)
  • 1 CT;20 PK (1)
  • 1 CT;25 PK (1)
  • 1 CT;50 Pk (3)
  • 1 CT;6 Pk (2)
  • 10 CT;100 PK (2)
  • 10 CT;50 PK (2)
  • 10 CT;60 PK (5)
  • 10 PK (7)
  • 10 PK;1 CT (26)
  • 10 PK;2 CT (11)
  • 100 CT;1000 PK (1)
  • 100 PK (34)
  • 100 PK;1 CT (8)
  • 100 PK;10 CT (6)
  • 100 PK;25 CT (2)
  • 1000 PK (9)
  • 1000 PK;100 CT (4)
  • 12 PK (1)
  • 12 PK;1 CT (2)
  • 120 PK;20 CT (1)
  • 15 CT;19 PK (1)
  • 15 PK;1 CT (2)
  • 150 PK (1)
  • 150 PK;15 CT (1)
  • 1500 PK (1)
  • 20 CT;120 PK (1)
  • 20 PK;1 CT (7)
  • 200 PK (8)
  • 200 PK;20 CT (1)
  • 200 PK;50 CT (2)
  • 2000 PK;20 CT (1)
  • 25 CT (4)
  • 25 CT;100 PK (1)
  • 25 CT;250 PK (9)
  • 25 PK (12)
  • 25 PK;1 CT (21)
  • 250 PK (6)
  • 250 PK;25 CT (13)
  • 2500 PK (1)
  • 30 PK (1)
  • 30 PK;5 CT (1)
  • 40 PK (3)
  • 40 PK;10 CT (2)
  • 5 CT;25 PK (2)
  • 5 CT;30 PK (2)
  • 5 PK;1 CT (2)
  • 50 CT;500 PK (4)
  • 50 PK (10)
  • 50 PK;1 CT (8)
  • 500 PK (17)
  • 500 PK;50 CT (7)
  • 6 PK (5)
  • 6 PK;1 CT (6)
  • 60 PK;10 CT (1)
  • 80 PK (1)
  • Show More...

• Weight

  

  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (4)
  • 0.0006 lb/EA (2)
  • 0.0007 lb/EA (3)
  • 0.0008 lb/EA (1)
  • 0.001 lb/EA (1)
  • 0.0012 lb/EA (1)
  • 0.0027 lb/EA (1)
  • 0.003 lb/EA (1)
  • 0.0033 lb/EA (1)
  • 0.005 lb/EA (1)
  • 0.0054 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.007 lb/EA (1)
  • 0.0071 lb/EA (1)
  • 0.0078 lb/EA (1)
  • 0.0080 lb/EA (1)
  • 0.0089 lb (1)
  • 0.0108 lb/EA (1)
  • 0.012 lb/EA (1)
  • 0.0132 lb (1)
  • 0.015 lb/EA (1)
  • 0.0151 lb (1)
  • 0.0154 lb (1)
  • 0.016 lb/EA (1)
  • 0.0167 lb/EA (2)
  • 0.0168 lb/EA (1)
  • 0.017 lb (1)
  • 0.0179 lb (1)
  • 0.0180 lb/EA (1)
  • 0.0183 lb (1)
  • 0.0183 lb/EA (1)
  • 0.0187 lb (1)
  • 0.0188 lb/EA (1)
  • 0.0196 lb/EA (1)
  • 0.0204 lb/EA (1)
  • 0.0216 lb/EA (1)
  • 0.0223 lb/EA (1)
  • 0.0224 lb/EA (1)
  • 0.0226 lb/EA (1)
  • 0.0234 lb (2)
  • 0.0282 lb (1)
  • 0.0282 lb/EA (1)
  • 0.0294 lb (1)
  • 0.0295 lb (1)
  • 0.03 lb (1)
  • 0.0315 lb (1)
  • 0.0320 lb (1)
  • 0.0362 lb (1)
  • 0.0396 lb (1)
  • 0.041 lb (1)
  • 0.0415 lb (1)
  • 0.0435 lb (1)
  • 0.045 lb/EA (1)
  • 0.046 lb (1)
  • 0.0471 lb (1)
  • 0.0475 lb/EA (1)
  • 0.053 lb/EA (1)
  • 0.0539 lb (1)
  • 0.0566 lb (1)
  • 0.0579 lb/EA (1)
  • 0.059 lb (1)
  • 0.0610 lb/EA (1)
  • 0.0625 lb (1)
  • 0.064 lb/EA (1)
  • 0.0648 lb/EA (1)
  • 0.065 lb (1)
  • 0.065 lb/EA (1)
  • 0.066 lb/EA (1)
  • 0.0660 lb (1)
  • 0.067 lb (1)
  • 0.068 lb/EA (1)
  • 0.069 lb (1)
  • 0.0692 lb (1)
  • 0.0694 lb (1)
  • 0.074 lb (1)
  • 0.075 lb/EA (2)
  • 0.078 lb/EA (1)
  • 0.0786 lb (1)
  • 0.0795 lb/EA (1)
  • 0.08 lb/EA (1)
  • 0.0801 lb (1)
  • 0.083 lb/EA (1)
  • 0.0839 lb/EA (1)
  • 0.085 lb (2)
  • 0.0857 lb (1)
  • 0.0880 lb/EA (1)
  • 0.0900 lb (1)
  • 0.091 lb (1)
  • 0.0916 lb/EA (1)
  • 0.092 lb (1)
  • 0.094 lb/EA (1)
  • 0.1 lb/EA (1)
  • 0.1004 lb/EA (1)
  • 0.102 lb (1)
  • 0.103 lb/EA (1)
  • 0.1030 lb (1)
  • 0.107 lb (1)
  • 0.111 lb/EA (1)
  • 0.1112 lb (1)
  • 0.113 lb (1)
  • 0.1160 lb (1)
  • 0.1163 lb (1)
  • 0.12 lb (1)
  • 0.12 lb/EA (1)
  • 0.1200 lb (2)
  • 0.124 lb/EA (1)
  • 0.1240 lb (1)
  • 0.126 lb/EA (1)
  • 0.128 lb/EA (1)
  • 0.1320 lb (1)
  • 0.137 lb/EA (1)
  • 0.138 lb/EA (2)
  • 0.14 lb (1)
  • 0.14 lb/EA (2)
  • 0.1400 lb (1)
  • 0.145 lb (1)
  • 0.15 lb/EA (1)
  • 0.152 lb/EA (1)
  • 0.1590 lb/EA (1)
  • 0.1596 lb/EA (1)
  • 0.16 lb/EA (1)
  • 0.1626 lb (1)
  • 0.1700 lb (1)
  • 0.1729 lb/EA (1)
  • 0.175 lb/EA (1)
  • 0.176 lb/EA (1)
  • 0.185 lb/EA (1)
  • 0.1864 lb/EA (1)
  • 0.188 lb/EA (1)
  • 0.193 lb/EA (1)
  • 0.1990 lb/EA (1)
  • 0.2 lb (2)
  • 0.2000 lb (1)
  • 0.206 lb/EA (1)
  • 0.21 lb (1)
  • 0.2100 lb (1)
  • 0.217 lb (1)
  • 0.2190 lb (1)
  • 0.221 lb/EA (1)
  • 0.23 lb/EA (1)
  • 0.2300 lb (1)
  • 0.232 lb/EA (1)
  • 0.2350 lb/EA (1)
  • 0.2366 lb/EA (1)
  • 0.24 lb/EA (2)
  • 0.2462 lb/EA (1)
  • 0.251 lb/EA (1)
  • 0.2600 lb (1)
  • 0.267 lb/EA (1)
  • 0.2689 lb/EA (1)
  • 0.2700 lb (1)
  • 0.2720 lb (1)
  • 0.275 lb/EA (1)
  • 0.276 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.292 lb/EA (1)
  • 0.2920 lb/EA (1)
  • 0.3 lb/EA (2)
  • 0.3000 lb (1)
  • 0.304 lb/EA (1)
  • 0.31 lb (1)
  • 0.3200 lb (2)
  • 0.3300 lb (1)
  • 0.355 lb/EA (1)
  • 0.3580 lb (1)
  • 0.3583 lb/EA (1)
  • 0.3600 lb (1)
  • 0.37 lb (1)
  • 0.38 lb/EA (1)
  • 0.388 lb/EA (1)
  • 0.39 lb/EA (2)
  • 0.3900 lb (1)
  • 0.405 lb/EA (1)
  • 0.408 lb/EA (1)
  • 0.4100 lb (1)
  • 0.4110 lb/EA (1)
  • 0.4167 lb/EA (1)
  • 0.4217 lb/EA (1)
  • 0.4233 lb/EA (1)
  • 0.4250 lb (1)
  • 0.448 lb (1)
  • 0.4840 lb (1)
  • 0.49 lb/EA (1)
  • 0.4920 lb (1)
  • 0.493 lb/EA (1)
  • 0.5000 lb (1)
  • 0.5167 lb/EA (1)
  • 0.52 lb/EA (2)
  • 0.5240 lb/EA (1)
  • 0.5280 lb/EA (1)
  • 0.533 lb/EA (2)
  • 0.5566 lb/EA (1)
  • 0.564 lb/EA (1)
  • 0.5670 lb (1)
  • 0.5717 lb/EA (2)
  • 0.584 lb (1)
  • 0.6 lb/EA (1)
  • 0.6580 lb (1)
  • 0.66 lb/EA (1)
  • 0.6625 lb/EA (1)
  • 0.6916 lb/EA (1)
  • 0.74 lb/EA (1)
  • 0.7500 lb (1)
  • 0.76 lb/EA (2)
  • 0.7600 lb (1)
  • 0.7920 lb/EA (1)
  • 0.8 lb/EA (1)
  • 0.8260 lb (1)
  • 0.8366 lb/EA (1)
  • 0.84 lb/EA (1)
  • 1 lb/EA (1)
  • 1.0499 lb/EA (1)
  • 1.1669 lb/EA (1)
  • 1.2639 lb (1)
  • 1.3 lb (1)
  • 1.308 lb/EA (2)
  • 1.525 lb/EA (1)
  • 1.617 lb/EA (1)
  • 1.65 lb/EA (1)
  • 10 lb/EA (1)
  • 11.0 lb (2)
  • 12 lb/EA (2)
  • 12.0 lb (1)
  • 2 lb/EA (2)
  • 2.11 lb/EA (1)
  • 2.2079 lb/EA (1)
  • 25 lb/EA (1)
  • 3.5 lb/EA (1)
  • 47 lb/EA (1)
  • 9.0 lb (1)
  • Show More...

• Height

  

  • 0.453 in (5)
  • 0.6875 in (1)
  • 0.718 in (1)
  • 0.75 in (1)
  • 1.94 in (1)
  • 1/2 in (4)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-11/16 in (1)
  • 1-15/16 in (1)
  • 13/16 in (1)
  • 1-3/4 in (2)
  • 1-3/8 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (1)
  • 2 in (1)
  • 2.13 in (1)
  • 2.25 in (1)
  • 2.81 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-7/16 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3.31 in (1)
  • 3.56 in (1)
  • 3/4 in (9)
  • 3/8 in (2)
  • 3-1/8 in (1)
  • 3-5/16 in (1)
  • 4.56 in (1)
  • 5/8 in (2)
  • 7/8 in (5)
  • 9/16 in (1)
  • Show More...

• Cable Size

  

  • #14 to 1/0 AWG (7)
  • #14 to 4 AWG (3)
  • .250 (1)
  • .375 (1)
  • 12/4, 10/2, 10/3 (1)
  • 14/2 to 10/3 (1)
  • EMT: 1-1/4 in (1)
  • Rigid: 1 in;EMT: 1 in (1)
  • Rigid: 1/2 in;EMT: 1/2 in (1)
  • Rigid: 1-1/2 in (1)
  • Rigid: 1-1/4 in;EMT: 1-1/2 in (1)
  • Rigid: 2 in;EMT: 2 in (1)
  • Rigid: 2-1/2 in;EMT: 2-1/2 in (1)
  • Rigid: 3 in;EMT: 3 in (1)
  • Rigid: 3/4 in;EMT: 3/4 in (1)
  • Rigid: 3-1/2 in;EMT: 3-1/2 in (1)
  • Rigid: 4 in;EMT: 4 in (1)
  • Show More...

• Number Of Conductors

  

  • 1 (4)
  • 1 Cable (2)
  • Show More...

• Category Description

  

  • BEAM, RA, EDGE, & PARALLEL CLAMPS (10)
  • CONDUIT HANGERS/STAND OFF STRAPS (17)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (40)
  • DIECAST EMT FITTINGS (91)
  • DIECAST OFFSET & CHASE NIPPLES (18)
  • EMT ELBOWS (2)
  • EMT STRAPS (15)
  • FLEX & MC FITTINGS (6)
  • FLEX & MC STRAPS (1)
  • FORM 5 CONDULETS, COVERS, & GASKETS (1)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (124)
  • METALLIC FITTINGS (11)
  • NON-METALLIC FITTINGS (4)
  • RIGID COUPLINGS (8)
  • RIGID ELBOWS (4)
  • RIGID STRAPS & CLAMPBACKS (30)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (5)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (13)
  • STEEL BOXES & COVERS (2)
  • STEEL EMT FITTINGS (118)
  • STRUT STRAPS (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (13)
  • Show More...

• Connector Type

  

  • Combination (12)
  • Compression (81)
  • E-Z Lock® (3)
  • Liquidtight (3)
  • Made in USA Compression (6)
  • PUSH-EMT® (10)
  • Raintight Compression (10)
  • SET SCREW (57)
  • Snap (2)
  • Steel Raintight/Concrete-Tight Insulated (10)
  • STRAIGHT (1)
  • Straight Nonmetallic (5)
  • Three-piece Conduit (7)
  • TRANSITION (3)
  • U Shaped (1)
  • Show More...

• Color

  

  • Black (16)
  • Gray (18)
  • Grey with Black Insulator (25)
  • Red (1)
  • White (10)
  • Yellow (11)
  • Show More...

• Type

  

  • BOX CONNECTOR (1)
  • Box Supports (2)
  • BUSHING (82)
  • Clamp Backs (3)
  • Clamp Straps (2)
  • Concrete Slab Elbow (1)
  • Conduit Clamps (6)
  • Conduit Hangers (17)
  • Conduit Hangers with Bolt and Nut (6)
  • Conduit Nipple (10)
  • Conduit Nipples (1)
  • CONNECTOR (134)
  • COUPLING (104)
  • Double Snap (2)
  • Dual Universal Strap (1)
  • EMT Nail Strap (3)
  • EMT Pull Elbows (2)
  • Insulator Support Beam Clamp (1)
  • Insulator Support Beam Clamps (4)
  • Knockout Plugs (6)
  • Locknuts (34)
  • Offset Nipple (8)
  • One Hole EMT Strap (6)
  • One Hole Pipe Strap (15)
  • One Hole Strap (1)
  • Protective (1)
  • Pull Elbows (4)
  • Rain Tight Compression Connector (1)
  • Raintight Compression (2)
  • Red Fire Alarm (1)
  • Reducing Washer (7)
  • Reducing Washers (25)
  • SPLIT (9)
  • Straight Nonmetallic (1)
  • Straps (2)
  • Switch Box Support (1)
  • Threaded Hubs (6)
  • Transition (6)
  • Two Hole Pipe Strap (16)
  • Wedge Grip Clamps (3)
  • Show More...

• Temperature Rating

  

  • 105 C (6)
  • 105 Degree C (7)
  • 105?°C (22)
  • 150?° (10)
  • 150?°C (25)
  • 90?°C (10)
  • Show More...

• Cable Entry

  

  • Does not Apply (2)
  • Through conduit into expansion throat back to conduit (8)
  • Through Rigid conduit into throat of fitting (6)
  • Through the fitting or conduit that the locknut is attached to (34)
  • Show More...

• Size

  

  • #1 (1)
  • 0 (3)
  • 1 (39)
  • 1 - 1/2 (2)
  • 1 - 3/4 (2)
  • 1 1/2 (20)
  • 1 1/4 (20)
  • 1" (1)
  • 1/2 (42)
  • 1/2 - 1 (1)
  • 1-1/2 (15)
  • 1-1/2 - 1 (2)
  • 1-1/2 - 1/2 (2)
  • 1-1/2 - 1-1/4 (2)
  • 1-1/2 - 3/4 (2)
  • 1-1/4 (13)
  • 1-1/4 - 1 (2)
  • 1-1/4 - 1/2 (2)
  • 1-1/4 - 3/4 (2)
  • 2 (37)
  • 2 - 1 (2)
  • 2 - 1 1/2 (1)
  • 2 - 1 1/4 (1)
  • 2 - 1/2 (2)
  • 2 - 1-1/2 (1)
  • 2 - 1-1/4 (1)
  • 2 - 3/4 (1)
  • 2 1/2 (13)
  • 2 1/2 - 1 (1)
  • 2 1/2 - 1 1/2 (1)
  • 2 1/2 - 1 1/4 (1)
  • 2 1/2 - 1/2 (1)
  • 2 1/2 - 2 (1)
  • 2 1/2 - 3/4 (1)
  • 2 -3/4 (1)
  • 2-1/2 (13)
  • 2-1/2 - 2 (1)
  • 3 (28)
  • 3 - 1 1/4 (1)
  • 3 - 2 (1)
  • 3 - 2 1/2 (1)
  • 3 - 2-1/2 (1)
  • 3 -1 1/2 (1)
  • 3 1/2 (8)
  • 3 1/2 - 2 (1)
  • 3 1/2 - 2 1/2 (1)
  • 3 1/2 - 3 (1)
  • 3/4 (48)
  • 3/4 - 1/2 (2)
  • 3/8 (6)
  • 3/8" (1)
  • 3-1/2 (12)
  • 3-1/2 - 3 (1)
  • 4 (28)
  • 4 - 2 (1)
  • 4 - 2 1/2 (1)
  • 4 - 3 (1)
  • 4 - 3 1/2 (1)
  • 4 - 3-1/2 (1)
  • 5 (4)
  • 6 (2)
  • 7 (1)
  • 8 (1)
  • 9 (1)
  • Show More...