Narrow By:

• Manufacturer: Crouse-Hinds

• Product Type

  

  • 1 1/2 Al Round Base Outlet 5" CVR (1)
  • 1 1/2 LB Form 8 THRD Rigid Outlet Body (1)
  • 1 1/2 LB Mark 9 THRD Rigid Outlet Body (1)
  • 1 1/2 LL Form 8 CNDT Body (1)
  • 1 1/2 LL Mark 9 CNDT Body (1)
  • 1 1/2 LR Form 8 CNDT Body (1)
  • 1 1/2 LR Mark 9 CNDT Body (1)
  • 1 1/2 LT Conn Ground Lug (1)
  • 1 1/2 NPT Fem CST Iron Vert/Horz Seal FT (2)
  • 1 1/2 NPT Fem Irn Expand Fill Drain Seal (1)
  • 1 1/2 NPT GRP B Male/Fem Iron Drain Seal (1)
  • 1 1/2 NPT Iron C Form 8 CNDT Body (1)
  • 1 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/2 or 2 Iron Mogul CVR/Gask (1)
  • 1 1/2 Retrofit Seal FT 5 1/4 X 3 5/8 X 3 (1)
  • 1 1/2 RGD LR Cond Body Al (1)
  • 1 1/2 RGD T Cond Body Al (1)
  • 1 1/2 SHT Al Mark 9 CVR (1)
  • 1 1/2 SHT Steel Form 8 CVR (1)
  • 1 1/2 T Al Form 7 CNDT Outlet Body (1)
  • 1 1/2 T Form 8 CNDT Outlet Body (1)
  • 1 1/2 T Mark 9 CNDT Outlet Body (1)
  • 1 1/4 Eyd Drain Seal Male-Female Hub (1)
  • 1 1/4 Form 5 LR Cond Body Malleable (1)
  • 1 1/4 Form 5 T Cond Body Malleable (1)
  • 1 1/4 LB Form 8 THRD Rigid Outlet Body (1)
  • 1 1/4 LB Mark 9 THRD Rigid Outlet Body (1)
  • 1 1/4 LL Form 7 CNDT Body (1)
  • 1 1/4 LL Form 8 CNDT Body (1)
  • 1 1/4 LR Form 7 CNDT Body (1)
  • 1 1/4 LR Form 8 CNDT Body (1)
  • 1 1/4 LT 45 Degree Conn Insulated (1)
  • 1 1/4 LT 90 Degree Conn Ground Lug (2)
  • 1 1/4 NPT Fem CST Iron Ver/Hor Seal FTG (1)
  • 1 1/4 NPT Iron TB Form 7 CNDT Body (1)
  • 1 1/4 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1 1/4 NPT Male/Fem Al Vert/Horz Seal FTG (1)
  • 1 1/4 NPT X Form 7 CNDT Outlet Body (1)
  • 1 1/4 Outl BX 3-5/8 CVR THRD Rigid/Imc (2)
  • 1 1/4 RGD LL Cond Body Al (1)
  • 1 1/4 RGD LR Cond Body Al (1)
  • 1 1/4 RGD T Cond Body Al (1)
  • 1 1/4 SHT Al Mark 9 CVR (1)
  • 1 1/4 SHT Steel Form 8 CVR (1)
  • 1 1/4 T Form 8 CNDT Oultet Body (1)
  • 1 1/4 Wdgnut SHT Al Form 7 CVR (1)
  • 1 Al Outlet BX 3 CVR For THRD Rigid/Imc (2)
  • 1 CNDT Body CVR & GSKT Stainless Steel (4)
  • 1 CNDT Outlet Body (1)
  • 1 LB Form 8 THRD Rigid Outlet Body (1)
  • 1 LB Mark 9 THRD Rigid Outlet Body (1)
  • 1 LL Form 8 CNDT Body (1)
  • 1 LL Mark 9 CNDT Body (1)
  • 1 LR Form 8 CNDT Body (1)
  • 1 LR Mark 9 CNDT Body (1)
  • 1 LT Conn Ground Lug (1)
  • 1 NPT Fem CST Iron Vert/Horz Seal FTG (1)
  • 1 NPT GRP B Male/Fem CST Iron Drain Seal (1)
  • 1 NPT Iron C Form 8 CNDT Body (1)
  • 1 NPT Male Al Cord/Cab FTG Neo Bush (3)
  • 1 NPT Male Cord/Cab FTG Neo Bush (1)
  • 1 NPT Thru Female CST Al Drain Seal (1)
  • 1 NPT Thru Female CST Iron Drain Seal (2)
  • 1 Outlet BX 3 CVR For THRD Rigid/Imc (1)
  • 1 Outlet BX 3 Dia CVR For THRD Rigid/Imc (1)
  • 1 Retrofit Seal FT 4 3/8 X 3 1/8 X 3 1/8 (1)
  • 1 SHT Al Mark 9 CVR (1)
  • 1 SHT STL Form 8 Cov (1)
  • 1 T Form 8 CNDT Outlet Body (1)
  • 1 T Mark 9 CNDT Outlet Body (1)
  • 1 Thrufeed CST Iron BX SGL GNG MT Lug (1)
  • 1/2 90 Quick Lok Pro Conn (1)
  • 1/2 Form 5 LL Cond Body Malleable (1)
  • 1/2 Form 5 LR Cond Body Malleable (1)
  • 1/2 FS &FD SGL Gang Cast Device BX (1)
  • 1/2 LB Form 8 THRD Rigid Outlet Body (1)
  • 1/2 LB Mark 9 THRD Rigid Outlet Body (1)
  • 1/2 LL Form 8 CNDT Body (1)
  • 1/2 LR Form 8 CNDT Body (1)
  • 1/2 LT 45 Deg Conn Ground Lug Cu Insul (1)
  • 1/2 LT 45 Deg Conn Ground Lug Insulated (1)
  • 1/2 LT 90 Deg Conn Ground Lug Insulated (1)
  • 1/2 LT Conn Al (1)
  • 1/2 NPT 90 Deg Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Al X Mark 9 CNDT Outlet Body (1)
  • 1/2 NPT CST Iron FS BX Two GNG MTG Lugs (2)
  • 1/2 NPT Fem CST Iron Vert/Horz Seal FTG (1)
  • 1/2 NPT Iron X Form 7 CNDT Outlet Body (1)
  • 1/2 NPT Male Al Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Cord/Armrd Cab FTG Neo Bush (1)
  • 1/2 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1/2 Outl BX 2 Dia CVR THRD Rigid/Imc (2)
  • 1/2 SHT Al Mark 9 CVR (1)
  • 1/2 SHT Steel Form 8 CVR (1)
  • 1/2 T Form 8 CNDT Outlet Body THRD Rigid (1)
  • 1/2 Thrufeed CST Iron BX SGL GNG MT Lug (2)
  • 1/2 Unv Drain or Breather (1)
  • 1/2 Wdgnut SHT Al Form 7 CVR (1)
  • 2 1/2 & 3 Series 5 Integral Gasket Cover (1)
  • 2 1/2 and 3 SHT Al Mark 9 CVR (1)
  • 2 1/2 and 3 Wdgnut CST Iron Form 7 CVR (1)
  • 2 1/2 D SW Box With Bumps For NM Cable (1)
  • 2 1/2 LB Form 7 THRD Rigid Outlet Body (1)
  • 2 1/2 LT 90 Degree Conn (1)
  • 2 1/2 LT Conn (1)
  • 2 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 2 1/2 T Form 7 CNDT Outlet Body (1)
  • 2 11/16 DP PVC SW Box 3 G Nail (1)
  • 2 3/4 DP Cond SW Box S Set 5/8 1/2 Ko (1)
  • 2 Al Outl BX 5 Dia CVR THRD Rigid/Imc (2)
  • 2 Fem Vert/Horz Expand Fill Sealing FT (1)
  • 2 Form 5 LL Cond Body Malleable (1)
  • 2 G Mason Box 2 1/2 DP 1/2 and 3/4 Ko (1)
  • 2 G Mason Box 3 1/2 DP 1/2 and 3/4 Ko (1)
  • 2 LB Form 8 THRD Rigid Outlet Body (1)
  • 2 LB Mark 9 THRD Rigid Outlet Body (1)
  • 2 LL Al Mark 9 CNDT Body (1)
  • 2 LL Form 8 CNDT Body (1)
  • 2 LR Form 8 CNDT Body (1)
  • 2 LR Mark 9 CNDT Body (1)
  • 2 LT Conn Ground Lug (1)
  • 2 NPT Fem Iron Expand Fill Drain Seal (1)
  • 2 NPT Iron C Form 8 CNDT Body (1)
  • 2 NPT Iron TB Form 7 CNDT CVR/Gask (1)
  • 2 NPT Male Cord/Cab FTG Neo Bush (1)
  • 2 NPT Thru Female Al Drain Seal (1)
  • 2 RGD LR Cond Body CVR and GSKT Al (1)
  • 2 RGD T Cond Body Al (1)
  • 2 SHT Al Mark 9 CVR (1)
  • 2 SHT STL Form 8 Cov (1)
  • 2 T Al Form 7 CNDT Outlet Body (1)
  • 2 T Form 8 CNDT Outlet Body (1)
  • 2 T Mark 9 CNDT Outlet Body (1)
  • 2 Wdgnut Al Form 7 CVR (1)
  • 20A 250V Al Thru SGL Gang RCPT Assy 3/4 (1)
  • 3 1/2 Deep Cond SW Box No CLMP 1/2 Ko (1)
  • 3 1/2 LB Form 7 THRD Rigid Outlet Body (1)
  • 3 1/2 RGD LB Cond Body Al (1)
  • 3 1/2 RGD LR Cond Body Al (1)
  • 3 1/2 Sealing Locknut (1)
  • 3 1/4 Round Ceil Pan Covr Flat BLNK (1)
  • 3 G Box CVR RSD 13/16 For Plaster (1)
  • 3 G Mason Box 3 1/2 DP 1/2 and 3/4 Ko (1)
  • 3 LT Conn (1)
  • 3 NPT Male/Fem Al Vert/Horz Seal FTG (1)
  • 3 NPT Male/Fem CST Iron Ver/Hor Seal FTG (1)
  • 3 NPT Thru Male/Fem CST Iron Drain Seal (1)
  • 3 T Form 7 CNDT Outle+C8411T Body (1)
  • 3/4 CNDT Body CVR & GSKT Stainless Steel (4)
  • 3/4 FS/FD SGL Cast Device BX (1)
  • 3/4 LB Form 8 THRD Rigid Outlet Body (1)
  • 3/4 LB Mark 9 THRD Rigid Outlet Body (1)
  • 3/4 LL Al Form 7 CNDT Body (1)
  • 3/4 LL Form 8 CNDT Body (1)
  • 3/4 LL Mark 9 CNDT Body (1)
  • 3/4 LR Al Form 7 CNDT Body (1)
  • 3/4 LR Form 8 CNDT Body (1)
  • 3/4 LR Mark 9 CNDT Body (1)
  • 3/4 LT Conn Ground Lug (1)
  • 3/4 NPT Aluminum TB Mark 9 CNDT Body (1)
  • 3/4 NPT CST Irn BX Two GNG MTG Lugs TNDM (1)
  • 3/4 NPT CST Iron FD BX Two GNG MTG Lugs (2)
  • 3/4 NPT De Al FD BX Two GNG MTG Lugs (2)
  • 3/4 NPT GRP B Male/Fem Iron Drain Seal (1)
  • 3/4 NPT Iron C Form 8 CNDT Body (1)
  • 3/4 NPT Male Al Cord/Cab FTG Neo Bush (5)
  • 3/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 3/4 NPT T Iron Round Base 3 3/16 CVR (1)
  • 3/4 NPT Thru Female CST Iron Drain Seal (2)
  • 3/4 Outl BX 2 Dia CVR THRD Rigid/Imc (2)
  • 3/4 Outlet BX 2 CVR For THRD Rigid/Imc (2)
  • 3/4 SHT Al Mark 9 CVR (1)
  • 3/4 SHT Al Mark 9 CVR/Gask (1)
  • 3/4 T Form 8 CNDT Oultet Body (1)
  • 3/4 T Mark 9 CNDT Outlet Body (1)
  • 3/4 Thrufeed CST Al FS BX SGL GNG MT Lug (2)
  • 3/8 LT 90 Degree Conn (1)
  • 3/8 LT Conn (1)
  • 3-1/2 & 4 Form 5 Cover Sheet Steel GSKT (1)
  • 4 11/16 SQ 1 Range Dryer Rec Surf CVR (1)
  • 4 11/16 SQ 1/2 RSD 1 Device CVR (1)
  • 4 11/16 SQ 3/4 RSD 1 Device CVR (1)
  • 4 11/16 SQ FLT 1/2 Ko CVR (1)
  • 4 11/16 SQ Outlet Box 1 1/4 Ko (1)
  • 4 G Mason Box 3 1/2 DP 1/2 and 3/4 Ko (1)
  • 4 LT 90 Degree Conn (1)
  • 4 NPT Thru Male/Fem CST Iron Drain Seal (1)
  • 4 Oct Cond Outlet Box 2 1/8 Deep 3/4 Ko (1)
  • 4 Oct Cond Outlet Box 3/4 Ko (1)
  • 4 SQ Box 1 TGL 1 SNGL Rec Surf CVR (1)
  • 4 SQ Box 2 1/8 Deep Welded Painted Red (1)
  • 4 SQ Box 2 RSD 1 Device Tile Wall CVR (1)
  • 4 SQ Box CVR 2 Device 1/4 RSD (1)
  • 4 SQ Ext Ring 1 1/2 Deep Painted Red (1)
  • 4 T Al Form 7 Outlet Body THRD Rigid (1)
  • 4SQ Part Cut Tile Wall 2GNG CVR 2 1/8 DP (1)
  • Barr Gland 3/4 NPT SZ1 Alu Liq (1)
  • Blank Cover (23)
  • Bushing (3)
  • Concr Box Plate No Stud 1/2 and 3/4 Ko (1)
  • Conduit Body (65)
  • Conduit Body Cover (5)
  • Conduit Outlet Body (36)
  • Conduit Outlet Box and Cover (3)
  • Conduit Outlet Box with Cover (30)
  • Conduit Seal Body (18)
  • Cord Gland (28)
  • Cord Grip Connector (13)
  • Cover (8)
  • Device Box (6)
  • Device Box Cover (1)
  • Edsc Flex Station CNTRL Station (1)
  • Emt Set Screw Connector (2)
  • Emt Set Screw Coupling (3)
  • Flat Box Cover (9)
  • Iron Sealing FTG (1)
  • Junc Box 3 3/4" Pipe PLGS (1)
  • Junction Box (3)
  • Liquid Tight 45° Connector (6)
  • Liquid Tight 45°Connector (6)
  • Liquid Tight 90° Connector (10)
  • Liquid Tight 90°Connector (10)
  • Liquid Tight Straight Connector (14)
  • Masonry Box (2)
  • Mogul Conduit Body (4)
  • Oct Exten Rings 1/2 and 3/4 (1)
  • Octagon Box (9)
  • Outlet Box (2)
  • Outlet Box Extension Ring (2)
  • Pro Connector (3)
  • Raised Box Cover (36)
  • Rigid Conduit Body Cover (6)
  • Round Ceiling Pan (3)
  • Sealing Locknut (9)
  • SGL GNG Blank CST Al CVR Gask (1)
  • SGL GNG Blank Sheet Al CVR Surface MNT (1)
  • SGL GNG Neo Gask (1)
  • Soft Case (1)
  • Square Box (3)
  • Square Box Extension Ring (2)
  • Square Outlet Box (3)
  • Steel Gang Box (2)
  • Steel Switch Box (26)
  • SW Box Extension (1)
  • TMC Armored Cable Gland (10)
  • Two GNG Blank SHT Steel Surface MNT CVR (1)
  • Two GNG SHT Steel Duplex Surface MNT CVR (1)
  • Util Box Gfci Deve CVR (1)
  • Utility Box (5)
  • Utility Box Cover (6)
  • Show More...

• Brand

  

  • Crouse Hinds (2)
  • Crouse-Hinds (28)
  • Eaton (640)
  • EATON CROUSE-HINDS SERIES (582)
  • Show More...

• Finish

  

  • Acrylic Painted (2)
  • Aluminum Acrylic Paint (6)
  • Corrosion Resistant Metallic Painted (1)
  • ELECTROGALVANIZED (21)
  • Electro-Galvanized Acrylic Painted (Body);Natural (Gasket) (1)
  • Electrogalvanized and Aluminum Acrylic Paint (4)
  • Electrogalvanized and Aluminum Acrylic Paint (Body);Natural (Cover) (25)
  • Electro-Galvanized Chromate Treated (2)
  • Electrogalvanized with Aluminum Acrylic Paint (64)
  • Electrogalvanized With Aluminum Acrylic Painted (201)
  • Electro-Galvanized with Aluminum Acrylic Painted (13)
  • Electrogalvanized With Aluminum Acrylic Painted (Body), Electrogalvanized With Chromate Treatment (Nut) (1)
  • Electrogalvanized With Chromate Treatment (3)
  • Epoxy Powder Coat (29)
  • Epoxy Powder Coated (12)
  • Epoxy Powder Painted (15)
  • Epoxy Powder Painted (Body);Natural (Gasket) (19)
  • Galvanized (4)
  • Hot Dip Galvanized (11)
  • Metallic Paint (1)
  • Natural (91)
  • Nickel (2)
  • Nickel Plated (5)
  • Untreated (57)
  • Zinc Chromate (4)
  • Zinc Electroplated (29)
  • Zinc Electroplated With Chromate Coated (39)
  • Zinc Plated (33)
  • Show More...

• Material

  

  • Aluminum (73)
  • Aluminum (Body, Gland Nut, Lock Nut);Steel (Ferrule);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (1)
  • Aluminum Body and Gland Nut, Neoprene Seal (3)
  • Aluminum Body, Copper Plated Stainless Steel Spring, Neoprene Seal (1)
  • Aluminum Body, Neoprene Seal (5)
  • Aluminum Die-Cast (1)
  • Brass (1)
  • Cast Aluminum (2)
  • Copper Free Aluminum (4)
  • Copper-Free Aluminum (2)
  • Die Cast Aluminum (1)
  • Die Cast Zinc (1)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (3)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (13)
  • Electrogalvanized With Aluminum Acrylic Painted Feraloy Iron Alloy (20)
  • EPDM RUBBER (1)
  • Feraloy (1)
  • FERALOY IRON ALLOY (52)
  • Feraloy Iron Alloy (Body And Cover);Neoprene (Gasket ) (4)
  • Feraloy Iron Alloy Body and Gland Nut, Neoprene Seal (8)
  • Feraloy Iron Alloy Body, Steel Gland Nut, Neoprene Seal (1)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (4)
  • Feraloy(R) Iron Alloy (1)
  • Feraloy(R) Iron Alloy (Body);Copper-free Aluminum (Cover) (5)
  • Malleable Iron (22)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (29)
  • Natural Finished Sand Copper Free Aluminum (4)
  • Natural Finished Sand Copper-Free Aluminum (4)
  • Neoprene Rubber (3)
  • Plastic (1)
  • PVC (9)
  • Sheet aluminum (1)
  • Sheet Steel (8)
  • Stainless Steel (5)
  • Steel (210)
  • Steel Body and Gland Nut, Neoprene Seal (10)
  • Steel Body, Aluminum Gland Nut, Neoprene Seal (2)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (24)
  • Turned Steel Body and Gland Nut, Neoprene Seal (1)
  • Zinc Chromate Sheet Steel (1)
  • Zinc Die Cast (1)
  • Show More...

• Color

  

  • Black (1)
  • Blue (2)
  • Brown (2)
  • Brown;Other (1)
  • Colorless (40)
  • Eaton Crouse-Hinds (3)
  • Gray (72)
  • Gray;Grey (1)
  • Green (2)
  • Ivory (61)
  • MALLEABLE IRON (87)
  • Natural (102)
  • Natural with red union nut (12)
  • Open Office, Retail (1)
  • Orange (1)
  • Purple (2)
  • Red (6)
  • Silver (1)
  • Unpainted (18)
  • White (2)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Yellow (2)
  • Show More...

• Trade Size

  

  • 1 1/2 IN (5)
  • 1 1/4 in (7)
  • 1 in (43)
  • 1/2 in (45)
  • 1-1/2 in (29)
  • 1-1/4 in (14)
  • 1-1/4 in;1-1/2 in (1)
  • 1-1/4 to 1-1/2 in (1)
  • 2 (1)
  • 2 1/2 in (7)
  • 2 in (35)
  • 2-1/2 IN (7)
  • 2-1/2 in;3 in (1)
  • 2-1/2 to 3 in (1)
  • 3 1/2 in (2)
  • 3 in (18)
  • 3/4 in (57)
  • 3/8 in (3)
  • 3/8/2015 (1)
  • 3-1/2 in;4 in (1)
  • 3-1/2 to 4 in (2)
  • 4 in (14)
  • Show More...

• Model

  

  • CG (13)
  • CGB (28)
  • DS (2)
  • EYS (1)
  • GUA (3)
  • Show More...

• Capacity

  

  • 1 cu.in (Vertical);1 cu.in (Horizontal) (1)
  • 10.3 cu.in (1)
  • 10.5 cu.in (1)
  • 10.8 cu.in (1)
  • 10-3/4 cu.in (Vertical);12-1/4 cu.in (Horizontal) (2)
  • 12 cu.in (1)
  • 12.2 cu.in (5)
  • 12.5 cu.in (6)
  • 13 cu.in (2)
  • 14 cu.in (4)
  • 14.5 cu.in (2)
  • 15.5 cu.in (9)
  • 16 cu.in (1)
  • 18 cu.in (4)
  • 183.5 cu.in (1)
  • 19 cu.in (Vertical);22-3/4 cu.in (Horizontal) (2)
  • 2 cu.in (1)
  • 2 cu.in (Vertical);2 cu.in (Horizontal) (1)
  • 20 cu.in (1)
  • 21 cu.in (1)
  • 21.5 cu.in (3)
  • 22 cu.in (6)
  • 25-1/2 cu.in (Vertical);30 cu.in (Horizontal) (1)
  • 29.5 cu.in (1)
  • 3 cu.in (Vertical);3-3/4 cu.in (Horizontal) (1)
  • 30.3 cu.in (6)
  • 308 cu.in (1)
  • 32.3 cu.in (2)
  • 33.8 cu.in (1)
  • 3-3/4 cu.in (2)
  • 35.3 cu.in (1)
  • 35.8 cu.in (1)
  • 4 cu.in (1)
  • 4.35 cu.in (5)
  • 42 cu.in (3)
  • 56 cu.in (Vertical);64-1/2 cu.in (Horizontal) (1)
  • 58 cu.in (1)
  • 6 cu.in (3)
  • 6 cu.in (Vertical);8 cu.in (Horizontal) (1)
  • 69.50 cu.in (1)
  • 69.7 cu.in (3)
  • 7.3 cu.in (4)
  • 7.5 cu.in (2)
  • 70 cu.in (1)
  • 71.2 cu.in (2)
  • 73 cu.in (1)
  • 9 cu.in (1)
  • 95 cu.in (Vertical);110 cu.in (Horizontal) (1)
  • Show More...

• Body Type

  

  • Conduit (46)
  • Conduit Seal (18)
  • E (3)
  • Form 5 (32)
  • Form 7 (61)
  • Form 8 (1)
  • L (6)
  • LB (7)
  • LBD Mogul (4)
  • T (10)
  • TB (2)
  • X (5)
  • XA (1)
  • Show More...

• Number Of Gangs

  

  • 1 (30)
  • 2 (2)
  • 3 (1)
  • 4 (3)
  • Three-gang (1)
  • Show More...

• Connection Type

  

  • Grip (10)
  • Male (2)
  • Male x Female (16)
  • Straight (15)
  • Straight Male (28)
  • Tapered Threaded (1)
  • Threaded (122)
  • Threaded/Set Screw (18)
  • Show More...

• Shape

  

  • C (10)
  • Deep (2)
  • LB (16)
  • LL (9)
  • LR (7)
  • Octagon (15)
  • Rectangular (46)
  • Round (36)
  • Shallow (4)
  • Square (75)
  • T (11)
  • TB (6)
  • X (5)
  • Show More...

• For Use With

  

  • 21 Series III/23 Series III/26 Series III/27/51 Series Ii/52 Series Ii/53 Series Ii/54 Series Ii/70 Series III/73 Series III/75 Series III/77 Series III/79 Series III/80 Series III/89 Series Iv/180 Series/712/713/714/715/716/717/725/787/8060a/8062a Conduit Body (1)
  • 4 in Square Box Partitions (15)
  • 4 in Square Boxes (1)
  • Air Plenum (11)
  • Air Plenum;Extension with Switch Box (2)
  • Aluminum Interlocking Grounding Metal-Clad Cable (13)
  • Conduit (10)
  • Conduit Outlet Body (7)
  • Conduit System (18)
  • Condulet(R) Conduit Body (23)
  • Dry Locations;Concrete Tight when Taped (3)
  • Electrical Devices (8)
  • EMT Conduit (1)
  • EMT Conduit;IMC Conduit;Rigid Conduit (4)
  • EMT Conduit;Threaded Rigid and IMC Conduit (1)
  • Fan and Fixture Support (2)
  • Flexible Cords Including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO, Tray Cable Types TC, TC-ER, TC-ER-HLA, ITC, ITC-ER, ITC-HL, PLTC and PLTC-ER Cables Steel/Copper Wire Braided Cable Steel Wire Armoured (28)
  • Gang Box (2)
  • General Use Snap Switches;Rigid Conduit Body (1)
  • Hazardous Area;Wet Location (25)
  • Hazardous Areas (3)
  • Liquidtight Flexible Metallic Conduit (30)
  • Manual Motor Starter (1)
  • Masonry Box (2)
  • Metal-Clad Cable (6)
  • Metal-Clad Cable;Non-Armoured and Tray Cable (4)
  • Mounting Old Work Switch Boxes in All Types of Wall Materials (1)
  • Non-Metallic Cable (4)
  • One 20 A Single Receptacle (1)
  • One 30 to 50 A Receptacle (1)
  • One 30 to 60 A Receptacle (1)
  • One Duplex Receptacle (1)
  • One Duplex Receptacle;One GFCI Receptacle (1)
  • One GFCI Receptacle (1)
  • One Single Receptacle (1)
  • One Toggle Switch (1)
  • One Toggle Switch;One Duplex Receptacle (1)
  • One Toggle Switch;One GFCI Receptacle (1)
  • Outlet Box (1)
  • Plaster (1)
  • Portable Cords including S, SO, STO, ST, SJ, SJT, SJTO and SVO (13)
  • Rigid and IMC Conduit to Mounting Surface (1)
  • Rigid Conduit (63)
  • Rigid Conduit Body (41)
  • Rigid Conduit Body;FM7 Unilet Conduit Outlet Bodies (1)
  • Rigid Conduit;IMC Conduit (9)
  • Rigid/Imc Conduit (5)
  • Rigid/IMC Conduit;Heavy-Duty Conductors;Pulling Large Conductors;Making Splices and Taps (1)
  • Rigid/IMC/EMT Conduit (4)
  • Steel Octagon Box (3)
  • Switches;Receptacles;Fans;Lights (3)
  • Threaded Rigid and IMC Conduit (5)
  • Tile or Brick (3)
  • Two Duplex Receptacles (1)
  • Two GFCI Receptacles (1)
  • Two Toggle Switches (1)
  • Utility Box (5)
  • Utility Boxes (7)
  • Show More...

• Knockout Size

  

  • 1/2 in (16)
  • 1/2 in (Bottom) (4)
  • 1/2 in (Bottom);1/2 in (Side) (11)
  • 1/2 in (Bottom);1/2 in (Side);1/2 in (End) (4)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);1 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);1/2 in (Side);1/2 to 3/4 in (Eccentric Knockout Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);3/4 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Moon Knockout Bottom);1/2 in (Side);1/2 to 3/4 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Moon Knockout Bottom);1/2 in (Side);1/2 to 3/4 In(Moon Knockout Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);1 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);1/2 to 3/4 in (Concentric Knockout Side) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side) (5)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side);1 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Eccentric Bottom);1/2 in (Side);3/4 in (Eccentric Side) (1)
  • 1/2 in (Bottom);3/4 in (Side) (2)
  • 1/2 in (Bottom);3/4 in (Side);3/4 in (End) (2)
  • 1/2 in;3/4 in (5)
  • 1/2 to 3/4 in (Concentric Knockout Side);1/2 to 3/4 in (Concentric Knockout End);1/2 to 3/4 in (Concentric Knockout Bottom) (2)
  • 3-1/2 in (1)
  • Show More...

• Number Of Hubs

  

  • 1 (26)
  • 2 (65)
  • 3 (27)
  • 4 (10)
  • 5 (2)
  • Show More...

• Number Of Knockouts

  

  • 10 (1)
  • 11 (3)
  • 12 (4)
  • 13 (5)
  • 14 (1)
  • 15 (1)
  • 16 (2)
  • 17 (5)
  • 24 (1)
  • 26 (1)
  • 3 (1)
  • 5 (8)
  • 6 (1)
  • 7 (12)
  • 8 (4)
  • 9 (10)
  • Show More...

• Length

  

  • 1.25 in (1)
  • 1.250 in (4)
  • 1.31 (3)
  • 1.31 in (3)
  • 1.313 in (1)
  • 1.38 (3)
  • 1.438 in (2)
  • 1.5 (2)
  • 1.5 in (2)
  • 1.500 in (1)
  • 1.56 (3)
  • 1.625 in (2)
  • 1.75 (5)
  • 1.75 in (1)
  • 1.750 in (1)
  • 1.76 (2)
  • 1.76 in (1)
  • 1.971 in (1)
  • 10.20 (2)
  • 10.5 in (1)
  • 10.50 (5)
  • 10.71 (2)
  • 10-1/2 (7)
  • 10-1/32 (3)
  • 10-3/8 (4)
  • 10-5/8 (1)
  • 11 (3)
  • 11.50 (5)
  • 11.75 (1)
  • 11-3/4 (2)
  • 12 (1)
  • 12.4375 in (2)
  • 12.6875 in (1)
  • 12-1/16 (2)
  • 12-1/4 (3)
  • 12-11/16 (2)
  • 128 mm (1)
  • 13.00 (1)
  • 13.14 (3)
  • 13.60 (3)
  • 13.80 (1)
  • 13.87 (4)
  • 1-3/4 in (1)
  • 13-1/2 (4)
  • 13-15/16 (1)
  • 13-3/4 (3)
  • 14.00 (2)
  • 140 mm (1)
  • 14-5/16 (1)
  • 15.00 (2)
  • 15.12 (3)
  • 15.35 (2)
  • 15.45 (2)
  • 15.46 (2)
  • 1-5/16 in (9)
  • 15-5/8 (2)
  • 16.00 (2)
  • 16.10 (2)
  • 16.25 (1)
  • 16.60 (2)
  • 16-19/32 (1)
  • 16-7/8 (1)
  • 17.3 (1)
  • 1-7/8 in (1)
  • 17-7/8 (4)
  • 18-3/4 (1)
  • 19.6875 in (1)
  • 1-9/16 in (2)
  • 19-11/16 (1)
  • 2 in (3)
  • 2.063 in (5)
  • 2.18 (1)
  • 2.188 in (1)
  • 2.19 (7)
  • 2.375 in (3)
  • 2.375 in (Gland) (1)
  • 2.376 in (3)
  • 2.44 (3)
  • 2.475 in (1)
  • 2.5 (2)
  • 2.500 in (1)
  • 2.625 in (Gland) (3)
  • 2.75 (2)
  • 2.75 in (1)
  • 2.750 in (1)
  • 2.750 in (Gland) (2)
  • 2.76 (1)
  • 2.875 in (Gland) (1)
  • 2.91 in (1)
  • 22 (1)
  • 22 in (1)
  • 23-1/4 (1)
  • 23-3/4 (1)
  • 27-13/16 (2)
  • 3 (4)
  • 3 in (17)
  • 3.001 in (2)
  • 3.125 in (Gland) (2)
  • 3.126 in (2)
  • 3.376 in (1)
  • 3.38 in (1)
  • 3.438 in (3)
  • 3.49 (1)
  • 3.5 (4)
  • 3.56 (1)
  • 3.6 (2)
  • 3.625 in (2)
  • 3.69 (1)
  • 3.75 (2)
  • 3-1/4 in (1)
  • 3-11/16 in (1)
  • 3-3/4 in (6)
  • 4 in (29)
  • 4.24 in (1)
  • 4.25 (2)
  • 4.25 in (5)
  • 4.28 (3)
  • 4.40 in (1)
  • 4.41 (1)
  • 4.41 in (1)
  • 4.5 in (Gland) (1)
  • 4.5625 in (3)
  • 4.67 in (1)
  • 4.68 (8)
  • 4.72 (1)
  • 4.813 in (1)
  • 4.82 (1)
  • 4.82 in (1)
  • 4.97 in (1)
  • 4-1/2 in (2)
  • 4-1/8 in (2)
  • 4-11/16 in (6)
  • 4-15/16 (3)
  • 4-19/32 (1)
  • 4-9/16 (3)
  • 5 (2)
  • 5 in (2)
  • 5.04 (1)
  • 5.07 (2)
  • 5.07 in (1)
  • 5.18 (1)
  • 5.1875 in (4)
  • 5.26 (2)
  • 5.37 (3)
  • 5.37 in (4)
  • 5.375 in (1)
  • 5.38 (2)
  • 5.38 in (2)
  • 5.40 (1)
  • 5.5 in (2)
  • 5.51 (2)
  • 5.59 (2)
  • 5.625 in (2)
  • 5.72 (2)
  • 5.79 in (1)
  • 5.8 in (3)
  • 5.94 in (2)
  • 5-1/4 (3)
  • 5-11/16 (4)
  • 5-3/16 (3)
  • 5-3/8 (1)
  • 5-5/16 in (1)
  • 5-5/8 (2)
  • 5-9/16 (3)
  • 6 (8)
  • 6 in (4)
  • 6.00 (5)
  • 6.08 (2)
  • 6.2 in (3)
  • 6.20 (3)
  • 6.25 (1)
  • 6.25 in (3)
  • 6.33 in (1)
  • 6.47 in (1)
  • 6.5 in (1)
  • 6.59 (2)
  • 6-1/2 (4)
  • 6-1/4 (5)
  • 6-15/32 (3)
  • 6-19/32 (2)
  • 6-3/32 (3)
  • 6-9/32 (4)
  • 7 (1)
  • 7 in (3)
  • 7.05 (3)
  • 7.05 in (2)
  • 7.125 in (3)
  • 7.25 in (5)
  • 7.4375 in (2)
  • 7.53 (1)
  • 7.79 in (1)
  • 7.81 in (1)
  • 7.87 (3)
  • 7.87 in (1)
  • 7-1/2 (1)
  • 7-1/32 (1)
  • 7-1/4 (2)
  • 7-1/8 (4)
  • 7-17/32 (1)
  • 7-3/4 (3)
  • 7-5/16 (5)
  • 7-7/16 (3)
  • 8 (7)
  • 8.12 (5)
  • 8.12 in (4)
  • 8.125 in (3)
  • 8.1875 in (4)
  • 8.45 (5)
  • 8.5 in (1)
  • 8-1/2 (2)
  • 8-1/4 (2)
  • 8-1/8 (3)
  • 8-11/32 (1)
  • 8-3/16 (3)
  • 9 (1)
  • 9.00 (10)
  • 9.1 in (1)
  • 9.1875 in (3)
  • 9.88 (1)
  • 9.88 in (1)
  • 9-1/8 (3)
  • 9-3/16 (5)
  • 9-3/16 in (1)
  • 9-5/16 (1)
  • Electrogalvanized Steel (1)
  • Light Commercial, Residential, Restroom (1)
  • Show More...

• Hub Size

  

  • 0.75 in (1)
  • 1 1/2 in (1)
  • 1 in (66)
  • 1/2 in (50)
  • 1-1/2 in (51)
  • 1-1/2 In, 2 In (1)
  • 1-1/4 in (34)
  • 1-1/4 In, 1-1/2 In (2)
  • 2 in (59)
  • 2-1/2 in (14)
  • 2-1/2 In, 3 In (3)
  • 2-3/4 in (Top, Bottom);1-3/4 in (Side) (1)
  • 3 in (29)
  • 3/4 in (71)
  • 3-1/2 in (8)
  • 3-1/2 In, 4 In (4)
  • 4 in (16)
  • Feraloy (1)
  • Show More...

• Mounting Type

  

  • (4) Pad (20)
  • Box Mount (19)
  • Bracket Mount (5)
  • Ceiling Mount (3)
  • Ear Mount (13)
  • External Clamp;Screw (1)
  • Horizontal Mount/Vertical Mount (11)
  • Leveling Bump Mount (1)
  • Screw (1)
  • Screw Mount (33)
  • Screw On (7)
  • Snap Bracket (1)
  • Snaptight (3)
  • Surface Mount (7)
  • Threaded (63)
  • Threaded (IMC/Rigid) (1)
  • Vertical Mount (5)
  • Wall Mount (1)
  • Wedge Nut (19)
  • Show More...

• Special Features

  

  • #8-32 TPI Screw Used On Cover, Open With 2-3/4 In Ear, Weight 26 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Open With 2-3/4 In Ear, Weight 27 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Open With 2-3/4 In Ear, Weight 31 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Open With 2-3/4 In Ear, Weight 34 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Open With 2-3/4 In Ear, Weight 37 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Weight 29 Lb per 100 (1)
  • #8-32 TPI Screw Used On Cover, Weight 31 Lb per 100 (2)
  • 1.73 In Hole Diameter, Weight 51 Lb per 100 (1)
  • 1-13/32 In Hole Diameter (2)
  • 1-13/32 In Hole Diameter, Weight 53 Lb per 100 (1)
  • 1-13/32 In Hole Diameter, Weight 9 Lb per 100 (1)
  • 1-19/32 In Hole Diameter (1)
  • 1-19/32 In Hole Diameter, Weight 9 Lb per 100 (1)
  • 1-23/32 In Hole Diameter (1)
  • 1-5/8 In Hole Diameter, Single Gang (1)
  • 1-7/16 In Hole Diameter, Single Gang (1)
  • 2 Piece Union Design (12)
  • 2.125 In Hole Diameter, Weight 48 Lb per 100 (1)
  • 2.48 In Hole Diameter, Weight 45 Lb per 100 (1)
  • 2-7/16 In Hole Diameter (1)
  • 28.3 cu.in Capacity (1)
  • 2-9/64 In Hole Diameter (1)
  • 3/8 to 1-1/4 In Raised Adjustable (2)
  • 4 Number of Clamp Opening (1)
  • Air plenum (1)
  • Armored/Non-Armored Gland, Cord Size 3.500 To 4.020 In (1)
  • Armoured/Non-Armoured Barrier Gland (4)
  • Bracket Assembly Consists Of (1) U-Bolt, (1) D-Plate With Nuts and Washers, Requires Single Mounting Brackets (1)
  • Cable Opening Size 1-1/8 In, Weight 17 Lb per 100 (1)
  • Cable Opening Size 1-21/32 In, Weight 42 Lb per 100 (1)
  • Cable Opening Size 15/16 In, Weight 14 Lb per 100 (1)
  • Cable Opening Size 1-7/8 In, Weight 77 Lb per 100 (1)
  • Cable Opening Size 2-1/2 In, Weight 100 Lb per 100 (1)
  • Cable Opening Size 2-7/8 In, Weight 160 Lb per 100 (1)
  • Cable Opening Size 3-9/16 In, Weight 221 Lb per 100 (1)
  • Cable Opening Size 4-19/32 In, Weight 1460 Lb per 100 (1)
  • Cable Opening Size 4-19/32 In, Weight 610 Lb per 100 (1)
  • Clamp Screws Through Beveled Corner (1)
  • Compact In Design;Supplied with a Variety of Hubs (6 Hubs and 3 Plugs or 10 Hubs and 7 Plugs);Cover Sealed with Standard "O" Ring Gasket for Raintight Enclosure (1)
  • Concrete-Tight (5)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (31)
  • Configuration Type FD, Dimension 2-3/4 In Width X 2-11/16 In Depth X 5-5/32 In Height (3)
  • Configuration Type FD, With Mounting Lug And Ground Screw, Dimension 4-5/8 In Width X 2-11/16 In Depth X 5-3/16 In Height (1)
  • Configuration Type FD, With Mounting Lug, Dimension 4-5/8 In Width X 2-11/16 In Depth X 5-3/16 In Height (1)
  • Configuration Type FDC, Dimension 2-3/4 In Width X 2-11/16 In Depth X 6-1/32 In Height (3)
  • Configuration Type FDC, With Mounting Lug And Ground Screw, Dimension 4-5/8 In Width X 2-11/16 In Depth X 6-1/16 In Height (1)
  • Configuration Type FS, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 5-5/32 In Height (3)
  • Configuration Type FS, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 5-9/32 In Height (1)
  • Configuration Type FS, With Mounting Lug, Dimension 4-5/8 In Width X 1-7/8 In Depth X 5-3/16 In Height (2)
  • Configuration Type FSC, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 6-1/32 In Height (4)
  • Configuration Type FSC, With Mounting Lug And Ground Screw, Dimension 4-5/8 In Width X 1-7/8 In Depth X 6-1/16 In Height (1)
  • Configuration Type FSC, With Mounting Lug, Dimension 4-5/8 In Width X 1-7/8 In Depth X 6-1/16 In Height (1)
  • Configuration Type FSCC, With Mounting Lug, Dimension 2-3/4 In Width X 1-7/8 In Depth X 6-1/32 In Height (1)
  • Configuration Type FSS, With Mounting Lug, Dimension 2-3/4 In Width X 1-7/8 In Depth X 5-5/32 In Height (2)
  • Corrosion Resistant (64)
  • Cover Openings on an Angle Permitting Conductors to be Pulled Straight Through Hubs from Either Direction;Domed Covers to Permit Easy Conductor Bends (Relieves Strain On Insulation);Cover and Gasket Furnished;Taper Tapped Hubs with Integral Bushings (4)
  • DS FS Fire Alarm System (2)
  • Ears (15)
  • Explosionproof;Dust Ignitionproof;Rain Tight (16)
  • Explosionproof;Dust Ignitionproof;Rain Tight;Threaded Cover Openings;Smooth Integral Hub Bushing Protects Conductor Insulation When Pulling (25)
  • Explosionproof;Dust-Ignitionproof;Raintight (3)
  • Fans and Fixtures Are Supported Independent of Outlet Box;Provided with Romex Connector (1)
  • Fits inside all 3" x 2" width boxes, maximum adjustable depth 0.78", furnished with mounting screws (1)
  • Five Different Hub Configurations;Taper Threaded Hubs to Provide Ground Continuity;Smooth Integral Hub Bushing to Protect Conductor Insulation When Pulling;Threaded Cover Openings;Surface Covers Furnished with Boxes;Neoprene O-Ring Gasket and Green Ground Screw are Both Standard;Cover Threads are 16 Pitch;Internal Green Ground Screw #10 (1)
  • Five Gang, Weight 75 Lb per 100 (1)
  • Fixture Rated (12)
  • Fixture rated, use with 4" octagon box (1)
  • Fixture Rated, Weight 44 Lb per 100 (1)
  • Fixture Rated, Weight 60 Lb per 100 (1)
  • Fixture Rated;Made of Steel (9)
  • For Cord Range 1.188 To 1.375 In (1)
  • For Cord Range 1.375 To 1.625 In (1)
  • For Cord Range 1.625 To 1.875 In (1)
  • For Use With 8-1/2 In X 4 In Sides Of Box (7)
  • For Use With 8-1/2 X 4 In Sides of RS And RSM Boxes (1)
  • Form 7 Condulet Outlet Bodies Approach Conduit in Size For Neat;Compact Installations;Orm 7 Has Exclusive Snaptight and Wedgenut Cover Attachment to Provide Clear;Unobstructed Cover Opening;Conduit Hubs Have Tapered Threads and Feature Integral Bushings (33)
  • Four Gang, Weight 94 Lb per 100 (1)
  • Gasket (4)
  • Grounding wire (1)
  • Horizontal/Vertical Position (28)
  • Includes ground screw with pigtail lead (3)
  • Includes Mounting Screws (1)
  • Leveling bumps (1)
  • Liquid Tight;Oil Tight;Rain Tight;Water Tight (9)
  • Load Capacity 50 Lb, With 1/2 In or 3/4 In Fixture Conduit Stem, Maximum Swing Angle 26 Deg (1)
  • Made of Steel (14)
  • Maximum Wire Size 900 KCMIL, Dimension 28-27/32 In Length X 5-1/2 In Width X 8-15/16 In Height, Weight 2060 Lb per 100 (1)
  • Minimum Turning Radius (1)
  • NEMA 4 Enclosure, Weight 14 Lb per 100 (1)
  • NEMA 4 Enclosure, Weight 20 Lb per 100 (2)
  • NEMA 4 Enclosure, Weight 40 Lb per 100 (1)
  • Neoprene O-Ring Standard in Cover to Meet NEMA 4/UL Type 4 Requirements;Internal Green Ground Screw;Five Standard Hubs with Three Pipe Plugs Included;Threaded Cover Opening;Recesses in Cover to Assist in Cover Tightening and Removal;Smooth, Integral Hub Bushing to Protect Conductor Insulation when Pulling;Compact Design for Confined Spaces (1)
  • Non-Armored Gland (7)
  • Non-Armored Gland, Cord Size 0.125 To 0.250 In (3)
  • Non-Armored Gland, Cord Size 0.250 To 0.375 In (2)
  • Non-Armored Gland, Cord Size 0.375 To 0.500 In (2)
  • Non-Armored Gland, Cord Size 0.500 To 0.625 In (2)
  • Non-Armored Gland, Cord Size 0.625 To 0.750 In (1)
  • Non-Armored Gland, Cord Size 0.875 To 1.000 In (3)
  • Non-Armored Gland, Cord Size 1.000 To 1.188 In (1)
  • Non-Armored Gland, Cord Size 1.625 To 1.875 In (1)
  • Non-Armored Gland, Cord Size 1.875 To 2.188 In (1)
  • Non-Armored Gland, Cord Size 2.188 To 2.500 In (2)
  • Non-Armored Gland, With Sealing Gasket, Cord Size 0.625 To 0.750 In (1)
  • Non-Armored Gland, With Sealing Gasket, Cord Size 0.750 To 0.875 In (1)
  • Non-Armored Gland, With Sealing Gasket, Cord Size 1.000 To 1.188 In (2)
  • Non-Armored Gland, With Sealing Gasket, Cord Size 1.875 To 2.188 In (1)
  • Not fan rated (1)
  • Number of Hubs 1, For Use With 8-1/2 In X 4 In Sides of RS and RSM Boxes (1)
  • One device (1)
  • One Device, Weight 21 Lb per 100 (1)
  • One Device, Weight 23 Lb per 100 (1)
  • One Device, Weight 26 Lb per 100 (1)
  • One Device, Weight 30 Lb per 100 (2)
  • One Device, Weight 34 Lb per 100 (1)
  • One Device, Weight 36 Lb per 100 (1)
  • One Device, Weight 39 Lb per 100 (1)
  • One Device, Weight 42 Lb per 100 (1)
  • One Device, Weight 46 Lb per 100 (1)
  • One Device, Weight 50 Lb per 100 (1)
  • One Device, Weight 52 Lb per 100 (1)
  • One Device, Weight 62 Lb per 100 (1)
  • One Device, Weight 64 Lb per 100 (1)
  • One Device, Weight 76 Lb per 100 (1)
  • Open With 2-3/4 In Ear, Weight 20 Lb per 100 (1)
  • Open With 2-3/4 In Ear, Weight 36 Lb per 100 (1)
  • Patented Labyrinth Design (1)
  • Perforated Center (1)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (30)
  • Raintight (1)
  • Raised Ground Screw Location in the Welded Boxes Saves time in Installation (12)
  • Reusable;Easy tool-Free Installation (3)
  • Round Adjustable, Weight 44 Lb per 100 (1)
  • Round neoprene gasket (4)
  • Round, with NM Snap-in Connector (1)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (13)
  • Rugged, Durable Construction Protects Cords and Cables from Damage and Compact Design;Weatherproof Seal on Outer Sheath of Cable (28)
  • Simplifying Installation, Reducing Inventory and Labor Costs;NEMA 4 Rated (7)
  • Single Gang (1)
  • Single Gang. Guarded (2)
  • Six Gang, Weight 85 Lb per 100 (1)
  • Storage Facilities;Shipping Warehouses;Retail and DIY Facilities (1)
  • Style GUP (1)
  • Style RS, Includes Top Cover With Gasket (1)
  • Supplied with Union Hubs, Which Makes it a Compact Assembly;Have a Variety of Hub Arrangements;Covers are Threaded;Mounting Straps are Standard on All Boxes (2)
  • Sweeping Bend Radius, Angled Cover (6)
  • The Gangable Feature Allows the Option of Creating a Multiple Gang Box from a Single Gang Box by Simply Removing the Combo Head Screw Holding the Side with a #2 Bit and Connecting the two (or More) Boxes together Reusing the Screws (2)
  • Thread-In-Thread Design (1)
  • Three Gang, 3/4 To 1-1/2 In Raised Adjustable, Weight 78 Lb per 100 (1)
  • Three Gang, Weight 60 Lb per 100 (1)
  • Two Cover Screws Provided on All Sizes to Provide Tight Cover and Gasket Assembly;Feraloy Iron Alloy Covers Have Dome Shapes for Added Strength and Extra Wiring Room (1)
  • Two device (1)
  • Two Device, Slotted Design for Use With 4 In Square Box Partition, Weight 12 Lb per 100 (1)
  • Two Device, Slotted Design for Use With 4 In Square Box Partition, Weight 13 Lb per 100 (1)
  • Two Device, Slotted Design for Use With 4 In Square Box Partition, Weight 18 Lb per 100 (1)
  • Two Device, Slotted Design for Use With 4 In Square Box Partition, Weight 22 Lb per 100 (1)
  • Two Device, Weight 24 Lb per 100 (1)
  • Two Device, Weight 30 Lb per 100 (1)
  • Two Device, Weight 31 Lb per 100 (1)
  • Two Device, Weight 34 Lb per 100 (1)
  • Two Device, Weight 42 Lb per 100 (1)
  • Two Device, Weight 44 Lb per 100 (1)
  • Two Device, Weight 50 Lb per 100 (1)
  • Two Device, Weight 66 Lb per 100 (1)
  • Two Gang, With Gasket (2)
  • Two Gang, With Operating Mechanism and Gasket (1)
  • Two metal holders for mounting old work switch boxes (1)
  • Use With 1/2 In Conduit Stem, Connection 3/8 In Male Threaded (1)
  • Vertical Position (5)
  • Vertical/Horizontal (3)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland (5)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland and Non-Armoured Barrier (5)
  • Weather Resistant;Corrosion Resistant;Fuel Resistant;Oil Resistant;Water Resistant (1)
  • Wedge Nut Design Facilitates Installation and Removal;Nuts are Held Captive in Cover;Covers Can be Used with or without Gaskets;Form 7 Covers with Integral Sealing Gaskets are Installed Without the Use of Screws;Reducing Installation Time (22)
  • Wedge-Lok Cast Cover (4)
  • Weight 10 Lb per 100 (3)
  • Weight 103 Lb per 100 (1)
  • Weight 104 Lb per 100 (2)
  • Weight 11 Lb per 100 (1)
  • Weight 1105 Lb per 100 (2)
  • Weight 113 Lb per 100 (2)
  • Weight 120 Lb per 100 (2)
  • Weight 143 Lb per 100 (1)
  • Weight 1437 Lb per 100 (2)
  • Weight 155 Lb per 100 (1)
  • Weight 172 Lb per 100 (1)
  • Weight 18 Lb per 100 (3)
  • Weight 183 Lb per 100 (1)
  • Weight 188 Lb per 100 (1)
  • Weight 19 Lb per 100 (1)
  • Weight 207 Lb per 100 (1)
  • Weight 21 Lb per 100 (1)
  • Weight 22 Lb per 100 (2)
  • Weight 236 Lb per 100 (1)
  • Weight 24 Lb per 100 (3)
  • Weight 25 Lb per 100 (2)
  • Weight 28 Lb per 100 (1)
  • Weight 31 Lb per 100 (2)
  • Weight 4 Lb per 100 (1)
  • Weight 40 Lb per 100 (1)
  • Weight 400 Lb per 100 (1)
  • Weight 41 per 100 (1)
  • Weight 45 Lb per 100 (2)
  • Weight 46 Lb per 100 (5)
  • Weight 50 Lb per 100 (2)
  • Weight 52 Lb per 100 (2)
  • Weight 60 Lb per 100 (1)
  • Weight 600 Lb per 100 (1)
  • Weight 65 Lb per 100 (1)
  • Weight 66 Lb per 100 (1)
  • Weight 69 Lb per 100 (1)
  • Weight 7 Lb per 100 (1)
  • Weight 70 Lb per 100 (2)
  • Weight 71 Lb per 100 (1)
  • Weight 72 Lb per 100 (1)
  • Weight 73 Lb per 100 (1)
  • Weight 74 Lb per 100 (2)
  • Weight 76 Lb per 100 (1)
  • Weight 8 Lb per 100 (1)
  • Weight 84 Lb per 100 (3)
  • Weight 85 Lb per 100 (1)
  • Weight 88 Lb per 100 (1)
  • Weight 93 Lb per 100 (1)
  • Weight 95 Lb per 100 (1)
  • Weight 99 Lb per 100 (1)
  • Welded/Drawn Construction (6)
  • With 1/2 In Raised Two Gang Uni-Mount Cover, Ground Screw and Lead, Weight 102 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Grounding Lug (20)
  • With 14 To 4 AWG Copper Grounding Lug (1)
  • With 6 To 3/0 AWG Aluminum Grounding Lug (2)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (4)
  • With Cover (8)
  • With Cover and Neoprene Gasket (37)
  • With Cover and Neoprene Gasket, Corrosion Resistant (1)
  • With Cover and Urethane Gasket (1)
  • With Cover, Cover Opening Diameter 2 In (8)
  • With Cover, Cover Opening Diameter 3 In (13)
  • With Cover, Cover Opening Diameter 3-3/16 In (2)
  • With Cover, Cover Opening Diameter 3-5/8 In (5)
  • With Cover, Cover Opening Diameter 5 In (9)
  • With Drain, Vertical Position (31)
  • With Enclosure (1)
  • With Neoprene Integral Gasket (22)
  • With Neoprene Integral Gasket, Weight 190 Lb per 100 (1)
  • With Round Neoprene Gasket (1)
  • With Steel Ring, Weight 1 Lb per 100 (1)
  • With Steel Ring, Weight 2 Lb per 100 (2)
  • With Steel Ring, Weight 3 Lb per 100 (1)
  • With Steel Ring, Weight 4 Lb per 100 (1)
  • With Two Gang Square Cut Tile Wall Raised Cover, Box Size 4 In Width X 4 In Height, Weight 16 Lb per 100 (1)
  • Show More...

• Width

  

  • 0.19 (4)
  • 0.25 (7)
  • 0.27 (1)
  • 0.285 (1)
  • 0.29 (3)
  • 0.3 (1)
  • 0.38 (2)
  • 0.39 (2)
  • 0.47 (2)
  • 0.53 (1)
  • 0.57 (1)
  • 0.66 (1)
  • 0.67 (9)
  • 0.69 (1)
  • 0.75 (1)
  • 0.77 (3)
  • 0.8 (4)
  • 0.84 (18)
  • 0.94 (1)
  • 1 (2)
  • 1 in (1)
  • 1.02 (5)
  • 1.06 (7)
  • 1.1 (1)
  • 1.13 (1)
  • 1.25 (3)
  • 1.31 (3)
  • 1.34 (1)
  • 1.34 in (3)
  • 1.375 in (4)
  • 1.46 (3)
  • 1.5 (2)
  • 1.5 in (4)
  • 1.50 (1)
  • 1.53 (1)
  • 1.53 in (2)
  • 1.56 in (1)
  • 1.625 in (2)
  • 1.63 (3)
  • 1.64 in (1)
  • 1.7 in (2)
  • 1.74 in (1)
  • 1.75 (1)
  • 1.75 in (1)
  • 1.78 (3)
  • 1.8 in (2)
  • 1.80 (2)
  • 1.9 in (4)
  • 1.97 (1)
  • 10.28 (1)
  • 10-5/8 in (1)
  • 10-7/16 (1)
  • 10-7/16 in (1)
  • 1-1/2 in (1)
  • 1-1/4 in (Dia.) (1)
  • 1-13/16 (1)
  • 1-15/16 in (6)
  • 12-1/4 (2)
  • 1-3/16 (1)
  • 1-3/4 (12)
  • 1-3/8 (4)
  • 14-1/16 (2)
  • 1-9/16 (8)
  • 1-9/16 in (1)
  • 2 (2)
  • 2 in (20)
  • 2.05 (8)
  • 2.06 (1)
  • 2.08 in (1)
  • 2.10 (1)
  • 2.125 in (5)
  • 2.1875 in (2)
  • 2.25 (5)
  • 2.25 in (3)
  • 2.28 in (2)
  • 2.3125 in (1)
  • 2.40 (1)
  • 2.4375 in (3)
  • 2.49 (7)
  • 2.51 (1)
  • 2.51 in (1)
  • 2.56 in (1)
  • 2.5625 in (3)
  • 2.6 in (3)
  • 2.60 (5)
  • 2.65 (4)
  • 2.75 (7)
  • 2.75 in (5)
  • 2.77 in (1)
  • 2.81 (1)
  • 2.83 (1)
  • 2.83 in (1)
  • 2.93 (2)
  • 2-1/2 (3)
  • 2-1/2 in (2)
  • 2-1/4 (2)
  • 2-1/8 (1)
  • 2-1/8 in (8)
  • 2-17/32 in (1)
  • 2-29/32 (1)
  • 2-3/16 (8)
  • 2-3/4 (7)
  • 2-3/4 in (1)
  • 2-3/8 (3)
  • 2-5/16 (3)
  • 2-5/32 (3)
  • 2-5/8 (7)
  • 2-7/16 (6)
  • 3 (10)
  • 3 in (1)
  • 3.00 (2)
  • 3.10 (3)
  • 3.12 (3)
  • 3.12 in (2)
  • 3.125 in (3)
  • 3.26 (1)
  • 3.33 (1)
  • 3.5 (1)
  • 3.5 in (1)
  • 3.50 (5)
  • 3.78 (1)
  • 3.83 (1)
  • 3.83 in (2)
  • 3-1/16 (1)
  • 3-1/2 (5)
  • 3-1/2 in (15)
  • 3-1/4 (4)
  • 3-11/16 (1)
  • 3-3/16 (3)
  • 3-3/4 (5)
  • 3-5/16 (1)
  • 3-5/32 (1)
  • 3-7/16 (3)
  • 3-7/32 (1)
  • 3-9/16 (3)
  • 4 (23)
  • 4 in (23)
  • 4.12 (4)
  • 4.13 in (1)
  • 4.25 in (1)
  • 4.28 (1)
  • 4.31 (2)
  • 4.31 in (2)
  • 4.42 (1)
  • 4.44 in (2)
  • 4.50 (2)
  • 4.625 in (2)
  • 4.65 (1)
  • 4-1/16 (1)
  • 4-1/2 in (1)
  • 4-1/4 (7)
  • 4-1/8 (9)
  • 4-11/16 (5)
  • 4-11/16 in (4)
  • 4-5/8 in (1)
  • 5 (5)
  • 5.00 (1)
  • 5.1875 in (1)
  • 5.25 in (1)
  • 5.40 (1)
  • 5.42 (6)
  • 5.5 (1)
  • 5.625 in (1)
  • 5.71 (3)
  • 5.87 (4)
  • 5.90 (1)
  • 5-1/4 (3)
  • 5-3/4 (7)
  • 5-3/4 in (8)
  • 5-5/16 (1)
  • 5-5/8 (1)
  • 5-9/16 (1)
  • 6.00 (1)
  • 6.05 (2)
  • 6.10 (1)
  • 6.40 (2)
  • 6.5 (1)
  • 6.90 (1)
  • 6-1/4 (2)
  • 6-11/16 (1)
  • 6-15/16 (2)
  • 64 mm (1)
  • 65 mm (1)
  • 7.21 (2)
  • 7-1/8 (2)
  • 7-3/8 (1)
  • 8-5/8 (1)
  • 8-5/8 in (1)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 2 Group a B C D;Class II Div 1 Group E F G;Class II Div 2 Group F G;Class III (1)
  • Class I Div 1 and 2 Group C D;Class II Div 1 and 2 Group E F G;Class III (16)
  • Class I Div 2;NEMA 3R (6)
  • Class I Div 2;NEMA 3R;NEMA 4;NEMA 4X (22)
  • Nema 3R (6)
  • Nema 4 (55)
  • NEMA FB-1 (1)
  • NEMA/EEMAC 3;NEMA/EEMAC 4 (3)
  • Show More...

• Diameter

  

  • 0.395 to 0.638 in (Cable) (1)
  • 0.460 to 0.610 in (Cable) (1)
  • 0.469 to 0.610 in (Cable) (1)
  • 0.813 in (4)
  • 0.97 in (1)
  • 0.975 in (5)
  • 1.220 in (6)
  • 1.23 in (10)
  • 1.25 in (6)
  • 1.250 in (2)
  • 1.5 in (2)
  • 1.55 in (1)
  • 1.563 in (5)
  • 1.656 in (4)
  • 1.78 in (2)
  • 2.25 in (7)
  • 2.250 in (1)
  • 2.438 in (3)
  • 3 in (6)
  • 3..813 in (1)
  • 3.15 in (1)
  • 3-1/2 in (1)
  • 3-1/4 in (1)
  • 4 in (12)
  • 4.188 in (3)
  • 4-1/16 in (1)
  • 5.750 in (1)
  • Show More...

• Height

  

  • 1 (1)
  • 1.02 (2)
  • 1.1 (1)
  • 1.25 (1)
  • 1.31 (1)
  • 1.34 (2)
  • 1.37 (5)
  • 1.37 in (1)
  • 1.375 in (1)
  • 1.40 (3)
  • 1.50 (2)
  • 1.51 (2)
  • 1.53 (1)
  • 1.53 in (1)
  • 1.6 (1)
  • 1.63 (3)
  • 1.64 (1)
  • 1.70 (4)
  • 1.74 in (1)
  • 1.75 (2)
  • 1.8 in (1)
  • 1.80 (2)
  • 1.87 (1)
  • 1.90 (5)
  • 1.97 (2)
  • 1.98 (1)
  • 1/2 in (4)
  • 10-1/8 in (2)
  • 1-1/2 in (16)
  • 1-11/16 (3)
  • 1-13/16 in (3)
  • 1-15/16 (3)
  • 11-7/8 (2)
  • 12.19 (1)
  • 12.25 (1)
  • 1-3/4 (4)
  • 1-3/8 (4)
  • 15 (1)
  • 1-5/8 (7)
  • 1-5/8 in (2)
  • 17 (1)
  • 1-7/16 (2)
  • 1-7/8 (10)
  • 1-7/8 in (2)
  • 1-9/16 (1)
  • 2 (4)
  • 2 in (10)
  • 2.00 (2)
  • 2.02 (1)
  • 2.05 (2)
  • 2.05 in (2)
  • 2.11 (1)
  • 2.25 (3)
  • 2.25 in (5)
  • 2.28 in (1)
  • 2.31 (1)
  • 2.31 in (1)
  • 2.38 (1)
  • 2.4375 in (3)
  • 2.47 (1)
  • 2.56 in (1)
  • 2.60 (5)
  • 2.625 in (2)
  • 2.65 (2)
  • 2.65 in (4)
  • 2.68 in (1)
  • 2.73 (5)
  • 2.74 in (1)
  • 2.75 (6)
  • 2.75 in (1)
  • 2.83 (4)
  • 2.83 in (1)
  • 2.85 (4)
  • 2.875 in (2)
  • 2-1/2 (2)
  • 2-1/2 in (8)
  • 2-1/4 (6)
  • 2-1/4 in (1)
  • 2-1/8 (1)
  • 2-1/8 in (14)
  • 2-11/16 (1)
  • 2-13/16 (1)
  • 2-13/32 (2)
  • 2-15/16 (1)
  • 2-15/32 (1)
  • 218 mm (1)
  • 220 mm (1)
  • 2-25/32 (4)
  • 2-27/32 (2)
  • 23.3 (1)
  • 2-3/16 in (1)
  • 2-3/4 (4)
  • 2-3/4 in (3)
  • 2-5/16 (5)
  • 2-5/16 in (5)
  • 2-5/8 (1)
  • 2-5/8 in (1)
  • 2-7/16 (2)
  • 2-7/32 (1)
  • 2-7/8 (3)
  • 2-9/16 (5)
  • 3 (4)
  • 3 in (2)
  • 3.00 (1)
  • 3.12 (2)
  • 3.125 in (1)
  • 3.1875 in (1)
  • 3.31 (3)
  • 3.3125 in (1)
  • 3.41 (3)
  • 3.41 in (2)
  • 3.45 (1)
  • 3.5 (6)
  • 3.5 in (4)
  • 3.5625 in (3)
  • 3.63 (5)
  • 3.65 (1)
  • 3.6875 in (1)
  • 3.75 (1)
  • 3.90 (3)
  • 3-1/2 (3)
  • 3-1/2 in (6)
  • 3-1/4 (5)
  • 3-1/8 (6)
  • 3-11/16 (1)
  • 3-11/32 (2)
  • 3-13/16 in (4)
  • 3-15/32 (2)
  • 3-3/16 (1)
  • 3-3/4 (6)
  • 3-3/4 in (2)
  • 3-5/16 (2)
  • 3-5/8 (1)
  • 3-7/16 (3)
  • 3-7/8 (1)
  • 3-9/16 (4)
  • 4 (22)
  • 4 in (2)
  • 4.00 (2)
  • 4.12 (2)
  • 4.12 in (1)
  • 4.125 in (2)
  • 4.13 (1)
  • 4.19 (3)
  • 4.24 in (1)
  • 4.25 (8)
  • 4.25 in (1)
  • 4.26 (1)
  • 4.30 (1)
  • 4.31 (4)
  • 4.42 (1)
  • 4.42 in (1)
  • 4.43 in (1)
  • 4.44 in (1)
  • 4.5 (1)
  • 4.625 in (1)
  • 4.66 (1)
  • 4.70 (1)
  • 4.75 (3)
  • 4.81 (3)
  • 4.88 (1)
  • 4-1/16 in (4)
  • 4-1/32 (2)
  • 4-1/4 (1)
  • 4-1/8 (1)
  • 4-1/8 in (1)
  • 4-11/16 (7)
  • 4-13/16 (4)
  • 4-15/32 (1)
  • 4-19/32 (1)
  • 4-3/8 (8)
  • 5 (8)
  • 5 in (1)
  • 5.16 in (1)
  • 5.1875 in (1)
  • 5.36 (2)
  • 5.4 in (1)
  • 5.40 (2)
  • 5.43 (4)
  • 5.4375 in (2)
  • 5.5 (7)
  • 5.59 (2)
  • 5.62 (3)
  • 5.66 (1)
  • 5.75 (1)
  • 5.9 in (1)
  • 5-1/4 (1)
  • 5-1/8 (1)
  • 5-15/16 (1)
  • 5-3/16 in (1)
  • 5-3/8 (3)
  • 5-5/8 (4)
  • 5-7/8 (2)
  • 6 (7)
  • 6.03 in (3)
  • 6.125 in (1)
  • 6.41 (1)
  • 6.56 (2)
  • 6.97 (1)
  • 6-1/16 in (1)
  • 6-1/2 (1)
  • 6-1/4 in (1)
  • 6-1/8 (2)
  • 6-13/16 (1)
  • 6-9/16 (1)
  • 7 (5)
  • 7.0625 in (1)
  • 7.11 (1)
  • 7.20 (1)
  • 7.25 (2)
  • 7.5 (1)
  • 7.875 (1)
  • 7.88 (2)
  • 7-13/16 (1)
  • 7-17/32 in (1)
  • 7-3/32 (1)
  • 8 (1)
  • 8.06 (3)
  • 9.01 (3)
  • 9.5625 in (1)
  • 9.75 (2)
  • 9.84 (2)
  • 9-9/16 (1)
  • Show More...

• Hub Location

  

  • (1) Side;(1) Down (5)
  • (2) Side (9)
  • (3) Side (6)
  • (4) Side (5)
  • 90º (32)
  • Cross (5)
  • End (5)
  • Straight (10)
  • Tee Side (17)
  • Show More...

• Includes

  

  • (2) Pins (1)
  • Built-In Roller (3)
  • Cover (27)
  • Cover and Gasket (4)
  • Cover;Nut;Sleeve (2)
  • Gasket (1)
  • Ground Screw (5)
  • Inside Pocket (1)
  • Integral Gasket (7)
  • Integral Sealing Gasket;Stainless Steel Screw (3)
  • Neoprene Bushing (13)
  • Neoprene O-Ring (4)
  • Stainless Steel Screw (40)
  • Stainless Steel Screw;Nylon Washers and Gasket (7)
  • Standard Neoprene Bushing (28)
  • Show More...

• Configuration

  

  • C (10)
  • E (3)
  • L (6)
  • LB (21)
  • LL (9)
  • LR (7)
  • T (17)
  • TB (6)
  • X (10)
  • Show More...

• Application

  

  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (64)
  • Act as Pull Outlets for Conductors that are Stiff Due to Large Size or Type of Insulation;Make 90° Bends in Conduit System;Allowing Straight Pull in Either Direction;Provide for Conduit Service Entrance to Buildings;Provide for Conductor Entrance to Motors;Provide Access to Wiring for Maintenance and Future Expansion (4)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (3)
  • Armored/Metal Clad Cable (4)
  • Buildings (1)
  • Commercial (17)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (404)
  • Commercial/Light Industrial (1)
  • Commercial;Industrial;Lighting Fixtures (6)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (30)
  • Commercial;Non-Hazardous Location (4)
  • Conduit (19)
  • Conduit Fitting (23)
  • Conduit;Commercial;Industrial (3)
  • Conduit;Commercial;Industrial;Wiring Device (1)
  • Eaton Crouse-Hinds (1)
  • General Purpose;Wet Location (6)
  • Hazardous Location (21)
  • Hazardous Location;Wet Location (28)
  • Hazardous Locations (3)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (16)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (474)
  • Ind Facilities & Factories - Industrial Facilities/Factories - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (1)
  • Industrial (1)
  • Masonry Box (2)
  • Non Metallic Cable (12)
  • Non-Hazardous Location (6)
  • Nuclear;Pharmaceutical Industry Chemical;Petrochemical;Cast Process (1)
  • Octagon Outlet Box (6)
  • Old-Work Switch Box (1)
  • Ordinary/Non-Hazardous Location (1)
  • Outlet Box (1)
  • Power and Control Circuits (2)
  • Protect Conductors in Threaded Rigid Conduit;Act as Pull and Splice Boxes;Connect Lengths of Conduit;Change Conduit Direction;Provide Access to Conductors for Maintenance and Future System Changes;Act as Mounting Outlets for Fixtures (with Appropriate Covers);Act as Sealing Fittings (with Appropriate Covers) (25)
  • Protect Conductors in Threaded Rigid Conduit;Act as Pulling and Splice Fittings;Interconnect Lengths of Conduit;Change Direction of Conduit;Provide Access for Maintenance and Future System Changes (1)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (13)
  • Provide Protection Against Exterior Explosion Where Acetylene;Hydrogen and Other Hazardous Gases are Present;Protect Conductors in Threaded Rigid Conduit;Act as Pull and Splice Boxes;Interconnect Lengths of Conduit;Change Conduit Direction;Provide Access to Conductors for Maintenance and Future System Changes (1)
  • Provides easy access to the ground rod connection area. (1)
  • Rigid Conduit Body (1)
  • Square Box (1)
  • Square Outlet Box (2)
  • Support Up to 50 Lbs (1)
  • Support Up to 70 Lbs;For Fans and 90 Lbs;Fixtures (1)
  • To Allow Easy Disassembly of Conduit System;To Function as Junction and Pull Box for Multiple Conductors And Conduits;Indoors or Outdoors Where Space is Limited;Such as in Gasoline Pumps (2)
  • To Protect Conductors in Threaded Rigid Conduit Systems;To Connect Lengths of Conduit;To Provide Access to Conductors for Maintenance or Future System Changes;To Change Conduit Direction Where Space is Limited;Such as Gasoline Pump Installations (1)
  • To Protect Conductors in Threaded Rigid Conduit;To Act as Pull And Splice Boxes;To Connect Lengths of Conduit;To Provide Access to Conductors for Maintenance and Future System Changes;To Change Conduit Direction;Where Space is Limited, Such as Underneath Gasoline Pumps (1)
  • Utility Box (5)
  • Wet Location (4)
  • Wet Locations;Hazardous Locations (1)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Show More...

• Sub Brand

  

  • Commercial Fittings (1)
  • Crouse-Hinds series (3)
  • Eaton Crouse-Hinds (10)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (2)
  • Liquidator(TM) (30)
  • PRE-formance (2)
  • Show More...

• Package Quantity

  

  • 1 ct (57)
  • 1 CT;10 PK (12)
  • 1 CT;15 PK (1)
  • 1 CT;2 Pk (15)
  • 1 CT;20 PK (2)
  • 1 CT;25 PK (20)
  • 1 CT;40 PK (1)
  • 1 CT;5 PK (13)
  • 1 CT;50 Pk (3)
  • 1 PK (6)
  • 10 CT (15)
  • 10 CT;25 PK (1)
  • 10 CT;40 PK (1)
  • 10 PK (12)
  • 10 PK;1 CT (7)
  • 100 PK (5)
  • 100 PK;1 CT (1)
  • 100 PK;25 CT (3)
  • 100 PK;5 CT (1)
  • 15 PK;1 CT (1)
  • 2 CT (25)
  • 2 CT;10 PK (1)
  • 2 CT;5 PK (3)
  • 2 PK (1)
  • 2 PK;1 CT (6)
  • 20 CT (1)
  • 20 PK (6)
  • 24 PK (1)
  • 25 CT (14)
  • 25 CT;50 PK (2)
  • 25 PK (39)
  • 25 PK;1 CT (8)
  • 25 PK;5 CT (1)
  • 40 PK;1 CT (1)
  • 5 CT (23)
  • 5 CT;10 PK (7)
  • 5 CT;20 PK (4)
  • 5 CT;25 PK (4)
  • 5 CT;50 PK (1)
  • 5 PK (9)
  • 5 PK;1 CT (9)
  • 50 CT (13)
  • 50 PK (64)
  • 50 PK;1 CT (5)
  • 500 PK;25 CT (1)
  • Show More...

• Weight

  

  • 0.01 lb/EA (1)
  • 0.02 lb/EA (2)
  • 0.03 lb/EA (1)
  • 0.04 lb/EA (2)
  • 0.05 lb/EA (3)
  • 0.06 lb/EA (1)
  • 0.07 lb/EA (1)
  • 0.08 lb (2)
  • 0.08 lb/EA (2)
  • 0.09 lb (1)
  • 0.09 lb/EA (3)
  • 0.1 lb/EA (2)
  • 0.11 lb (1)
  • 0.12 lb/EA (3)
  • 0.13 lb/EA (3)
  • 0.15 lb (1)
  • 0.15 lb/EA (3)
  • 0.16 lb/EA (1)
  • 0.17 lb/EA (1)
  • 0.18 lb (1)
  • 0.18 lb/EA (1)
  • 0.19 lb (2)
  • 0.2 lb/EA (3)
  • 0.21 lb/EA (1)
  • 0.22 lb/EA (4)
  • 0.23 lb (1)
  • 0.23 lb/EA (2)
  • 0.24 lb/EA (2)
  • 0.25 lb/EA (3)
  • 0.27 lb/EA (2)
  • 0.28 lb/EA (2)
  • 0.29 lb/EA (1)
  • 0.3 lb/EA (1)
  • 0.32 lb/EA (3)
  • 0.33 lb/EA (1)
  • 0.34 lb/EA (3)
  • 0.35 lb (2)
  • 0.35 lb/EA (2)
  • 0.36 lb/EA (3)
  • 0.37 lb/EA (4)
  • 0.39 lb/EA (2)
  • 0.4 lb/EA (1)
  • 0.42 lb/EA (1)
  • 0.43 lb/EA (1)
  • 0.44 lb (1)
  • 0.44 lb/EA (1)
  • 0.45 lb/EA (1)
  • 0.46 lb/EA (4)
  • 0.47 lb/EA (2)
  • 0.48 lb/EA (1)
  • 0.51 lb/EA (4)
  • 0.53 lb/EA (1)
  • 0.54 lb/EA (3)
  • 0.55 lb (2)
  • 0.55 lb/EA (2)
  • 0.56 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb (2)
  • 0.6 lb/EA (2)
  • 0.62 lb/EA (1)
  • 0.64 lb/EA (1)
  • 0.65 lb/EA (1)
  • 0.66 lb/EA (4)
  • 0.68 lb/EA (1)
  • 0.76 lb/EA (2)
  • 0.77 lb/EA (1)
  • 0.79 lb/EA (3)
  • 0.8 lb/EA (1)
  • 0.86 lb/EA (1)
  • 0.87 lb/EA (2)
  • 0.9 lb/EA (3)
  • 0.93 lb/EA (4)
  • 0.94 lb/EA (2)
  • 0.97 lb/EA (1)
  • 0.98 lb/EA (1)
  • 0.99 lb/EA (2)
  • 1.01 lb/EA (1)
  • 1.03 lb/EA (1)
  • 1.06 lb/EA (1)
  • 1.07 lb/EA (1)
  • 1.08 lb (1)
  • 1.08 lb/EA (2)
  • 1.09 lb/EA (1)
  • 1.1 lb (1)
  • 1.11 lb/EA (1)
  • 1.12 lb (1)
  • 1.15 lb/EA (3)
  • 1.1599 lb (1)
  • 1.16 lb (1)
  • 1.18 lb/EA (2)
  • 1.19 lb (1)
  • 1.22 lb/EA (2)
  • 1.23 lb/EA (1)
  • 1.25 lb/EA (2)
  • 1.3 lb/EA (2)
  • 1.33 lb/EA (2)
  • 1.35 lb/EA (2)
  • 1.6 lb/EA (1)
  • 1.62 lb/EA (1)
  • 1.64 lb/EA (1)
  • 1.65 lb/EA (2)
  • 1.69 lb/EA (1)
  • 1.7 lb/EA (3)
  • 1.71 lb/EA (3)
  • 1.74 lb/EA (1)
  • 1.79 lb/EA (1)
  • 1.8 lb/EA (1)
  • 1.84 lb/EA (1)
  • 1.85 lb/EA (1)
  • 1.9 lb/EA (1)
  • 1.96 lb/EA (1)
  • 10 lb/100 (6)
  • 10.35 lb/EA (2)
  • 10.5 lb/EA (1)
  • 10.65 lb/EA (1)
  • 104 lb/100 (3)
  • 11.05 lb/EA (1)
  • 11.3 lb/100 (2)
  • 11.4 lb/EA (1)
  • 11.8 lb/EA (1)
  • 110.2 lb/100 (1)
  • 12 lb/100 (1)
  • 12.45 lb/EA (1)
  • 121.3 lb/100 (1)
  • 1234.6 lb/100 (1)
  • 13.25 lb/EA (1)
  • 14 lb/100 (6)
  • 15 lb/100 (1)
  • 16.05 lb/EA (1)
  • 17.6 lb/100 (1)
  • 176.4 lb/100 (2)
  • 18 lb/EA (1)
  • 19.5 lb/100 (1)
  • 2 lb/EA (1)
  • 2.15 lb/EA (1)
  • 2.17 lb/EA (1)
  • 2.18 lb/EA (1)
  • 2.2 lb/EA (2)
  • 2.25 lb/EA (2)
  • 2.27 lb/EA (1)
  • 2.3 lb/EA (2)
  • 2.33 lb/EA (1)
  • 2.35 lb/EA (3)
  • 2.42 lb/EA (1)
  • 2.43 lb/EA (2)
  • 2.45 lb/EA (1)
  • 2.5 lb/EA (1)
  • 2.53 lb/EA (1)
  • 2.55 lb/EA (1)
  • 2.6 lb/EA (3)
  • 2.62 lb/EA (1)
  • 2.68 lb (1)
  • 2.7 lb (2)
  • 2.7 lb/EA (3)
  • 2.78 lb/EA (1)
  • 2.85 lb/EA (1)
  • 2.9 lb/EA (2)
  • 2.93 lb/EA (2)
  • 20 lb/100 (2)
  • 20.95 lb/EA (1)
  • 21 lb/EA (1)
  • 22 lb/EA (1)
  • 23 lb/EA (2)
  • 26 lb/EA (5)
  • 26.7 lb/100 (1)
  • 27 lb/100 (1)
  • 27 lb/EA (1)
  • 27.1 lb/100 (1)
  • 28.7 lb/100 (2)
  • 28.9 lb/100 (1)
  • 280 lb/100 (1)
  • 3.05 lb/EA (1)
  • 3.13 lb/EA (1)
  • 3.15 lb/EA (1)
  • 3.18 lb/EA (1)
  • 3.19 lb/EA (1)
  • 3.25 lb/EA (1)
  • 3.3 lb/EA (2)
  • 3.33 lb/EA (1)
  • 3.4 lb/EA (1)
  • 3.57 lb/EA (1)
  • 3.63 lb/EA (1)
  • 3.67 lb/EA (1)
  • 3.7 lb (1)
  • 3.7 lb/EA (1)
  • 3.72 lb/EA (1)
  • 3.73 lb/EA (1)
  • 30 lb/EA (4)
  • 31 lb/EA (7)
  • 31.1 lb/100 (1)
  • 32 lb/EA (1)
  • 33.25 lb/EA (1)
  • 34 lb/EA (5)
  • 35 lb/EA (3)
  • 363.8 lb/100 (1)
  • 37 lb/EA (1)
  • 39 lb/EA (2)
  • 39.7 lb/100 (3)
  • 4.05 lb/EA (2)
  • 4.1 lb/EA (1)
  • 4.35 lb/EA (1)
  • 4.45 lb/EA (2)
  • 4.53 lb/EA (2)
  • 4.6 lb/EA (1)
  • 4.85 lb/EA (1)
  • 4.95 lb/EA (1)
  • 42 lb/100 (1)
  • 44.1 lb/100 (2)
  • 44.2 lb/EA (1)
  • 456.4 lb/100 (1)
  • 5 lb/EA (1)
  • 5.33 lb/EA (2)
  • 5.4 lb/EA (1)
  • 5.6 lb/EA (2)
  • 50 lb/100 (6)
  • 50 lb/EA (3)
  • 51 lb/100 (1)
  • 56 lb/100 (3)
  • 58 lb/100 (3)
  • 59 lb/100 (1)
  • 6 lb/100 (1)
  • 6 lb/EA (1)
  • 6.1 lb/EA (1)
  • 6.25 lb/EA (1)
  • 6.35 lb/EA (1)
  • 61 lb/100 (2)
  • 63 lb/100 (1)
  • 63.5 lb/100 (1)
  • 64 lb/100 (2)
  • 65 lb/100 (1)
  • 66.6 lb/100 (1)
  • 67 lb/100 (3)
  • 70 lb/100 (2)
  • 70.5 lb/100 (1)
  • 74.5 lb/100 (1)
  • 789.2 lb/100 (1)
  • 8.75 lb/EA (1)
  • 8.9 lb/EA (1)
  • 81 lb/100 (1)
  • 82 lb/100 (1)
  • 84 lb/100 (7)
  • 859.8 lb/100 (1)
  • 9.15 lb/EA (1)
  • 9.25 lb/EA (1)
  • 9.35 lb/EA (1)
  • 9.7 lb/EA (1)
  • 9.75 lb/EA (1)
  • 96 lb/100 (1)
  • 96.1 lb/100 (1)
  • 99.2 lb/100 (1)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (72)
  • CADDY (STRAPS ONLY) (1)
  • CORD CONNECTORS & CORD GRIPS (117)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (1)
  • FLEX & MC FITTINGS (19)
  • FORM 5 CONDULETS, COVERS, & GASKETS (179)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (247)
  • Form 9 condulets, covers & gaskets (58)
  • FS BOXES AND COVERS (45)
  • Fuses & Fuse Accessories (3)
  • HANDY BOXES (12)
  • HAZARDOUS LOCATION FITTINGS (105)
  • HAZARDOUS LOCATION LIGHTING FIXTURES (1)
  • HAZARDOUS LOCATION MOTOR CONTROL (2)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (111)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (16)
  • METALLIC FITTINGS (96)
  • MISC FITTINGS (4)
  • NON METALLIC JUNCTION BOXES (1)
  • NON-METALLIC FITTINGS (2)
  • OCTAGON BOXES (2)
  • PLASTIC BOXES (3)
  • Residential cord connectors (1)
  • RIGID STRAPS & CLAMPBACKS (4)
  • SLB'S & JAKE ELL'S (1)
  • STEEL BOXES & COVERS (111)
  • STEEL EMT FITTINGS (5)
  • SWITCH BOXES (23)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (1)
  • WIRE NUTS (1)
  • Show More...

• Temperature Rating

  

  • -25 To 40 Deg C (61)
  • -25 To 60 Deg C (17)
  • -25° to 40°C (1)
  • -40 to + 60 Degrees C (12)
  • Show More...

• Construction

  

  • Drawn (45)
  • Explosionproof, Dust Ignitionproof (4)
  • Explosionproof, Dust-Ignitionproof, Raintight (69)
  • Pre-galvinized steel (5)
  • PVC (2)
  • Raintight (3)
  • Watertight (3)
  • Watertight, Explosionproof (1)
  • Welded (72)
  • Show More...

• Type

  

  • Adjustable bar hanger (1)
  • Adjustable mud ring (5)
  • BACK BOX (1)
  • Blank Box Cover (1)
  • BLANK COVER (4)
  • Blank hub plate (1)
  • Cable gland (97)
  • Cable gland bushing (3)
  • Ceiling box (1)
  • Ceiling fan box (3)
  • Clamp type connector (9)
  • COMBINATION BREATHER/DRAIN (1)
  • Concrete box plate (1)
  • Conduit body, cover and gasket (8)
  • Conduit Hub Plate (9)
  • Conduit outlet body (314)
  • Conduit outlet body with cover (3)
  • Conduit outlet body, gasket and cover (6)
  • Conduit outlet box with cover (75)
  • Conduit sealing fitting (39)
  • Conduit sealing fitting with drain (26)
  • CONNECTOR (5)
  • Cord grip (19)
  • COVER (42)
  • Cover with integral gasket (16)
  • DEVICE BOX (32)
  • Device box gasket (1)
  • DRAIN (4)
  • Duplex Receptacle Cover (2)
  • Expanded fill sealing fitting (11)
  • Expanded fill sealing fitting with drain (7)
  • Expansion coupling (1)
  • Flexible Fixture Hanger (2)
  • Gang box (9)
  • Gang box cover (4)
  • Gang box partition (1)
  • Gasket (1)
  • GROUNDING CLIP (1)
  • Grounding receptacle cover (1)
  • Grounding screw with pigtail (1)
  • Hold-it switch box support (1)
  • Integral gasket cover (4)
  • JUNCTION BOX (7)
  • Liquidtight connector (115)
  • Masonry Box (8)
  • Mogul blank cover (8)
  • Mogul conduit body (30)
  • Mogul pulling elbow (2)
  • Non-gangable switch box (2)
  • Octagon box and adjustable bar set (1)
  • Octagon box cover (6)
  • Octagon concrete box (4)
  • Octagon outlet box (20)
  • Old work clip (1)
  • Pre-Fabricated, Square (1)
  • Raintight snap switch cover (2)
  • RECEPTACLE COVER (1)
  • Retrofit sealing fitting (5)
  • Round ceiling cover (2)
  • Round ceiling pan (2)
  • Sealing cover (2)
  • Sealing Hub (4)
  • Sealing Locknut (10)
  • Self-retaining gasket (6)
  • Service entrance cap (1)
  • Set screw type connector (2)
  • Set screw type coupling (3)
  • Snap or toggle switch cover (1)
  • Snap switch cover (2)
  • Snaptight cover with integral gasket (4)
  • Square box partitions (1)
  • Square cover (26)
  • Square extension ring (8)
  • Square mud ring (14)
  • Square outlet box (26)
  • Square surface cover (26)
  • Squeeze type connector (10)
  • Standard drain (1)
  • STEEL ROUND CEILING PAN (1)
  • STRAP (4)
  • Switch box (27)
  • Switch box extension (1)
  • Tile wall square cover (6)
  • Universal breather/drain (3)
  • UTILITY BOX (5)
  • Utility box cover (7)
  • Utility extension ring (1)
  • Wedge nut cover (23)
  • Wedge nut cover with integral gasket (13)
  • Show More...

• Cable Entry

  

  • (1) Each End (10)
  • (1) Each Side (3)
  • (1) End (13)
  • (1) Side (1)
  • (1) Side, (1) Down (7)
  • (2) One End, (1) Other End (1)
  • (2) Side (15)
  • (2) Side, (1) Down (2)
  • (3) Side (18)
  • (4) Side (15)
  • (4) Side, (1) Down (1)
  • Dead End (3)
  • Feed Through (10)
  • Female Threaded, Male Threaded (3)
  • KO (23)
  • Show More...

• Size

  

  • (3) 3/4 In (1)
  • (4) 3/4 In (1)
  • 1 in (37)
  • 1 In X 1-1/2 In (1)
  • 1" NPT, Size 1 (2)
  • 1" NPT, Size 2 (1)
  • 1/2 in (56)
  • 1/2 IN NPT, Size 0 (1)
  • 1/2" NPT, Size 1 (2)
  • 1/2" NPT, Size 2 (1)
  • 10-5/8 In Length (2)
  • 1-1/2 in (20)
  • 1-1/2 In Depth (1)
  • 1-1/2 In X 2 In (1)
  • 1-1/4 in (16)
  • 12-7/16 In Length (1)
  • 14 To 22-1/2 In Length (1)
  • 14-1/4 In Length (1)
  • 2 in (22)
  • 2 IN NPT Size 2 (1)
  • 2 In Width X 1-1/2 In Depth X 3 In Height (2)
  • 2 In Width X 2 In Depth X 3 In Height (2)
  • 2 In Width X 2-1/2 In Depth X 3 In Height (9)
  • 2 In Width X 3-1/2 In Depth X 3 In Height (7)
  • 2 In X 2-1/2 In (1)
  • 2 In, 3/4 In (Top Hub, Bottom Hub), 1 In, 3/4 In (Side Hub) (1)
  • 2 In, 3/4 In (Top Hub, Bottom Hub), 1 In, 3/4 In (Side Hub), 4 In, 3/4 In (Back Hub) (1)
  • 2-1/2 in (7)
  • 3 in (6)
  • 3 in diameter (1)
  • 3 In X 4 In (1)
  • 3/4 in (72)
  • 3/4 IN NPT, Size 0 (1)
  • 3/4" NPT, Size 1 (2)
  • 3/4" NPT, Size 2 (1)
  • 3/8 in (4)
  • 3/8 To 1/2 In (1)
  • 3-1/2 in (1)
  • 3-1/2 In (Rigid/EMT) (1)
  • 3-1/2 In Diameter X 2-1/8 In Depth (1)
  • 3-1/4 In Diameter X 1/2 In Depth (1)
  • 3-1/4" (2)
  • 4 in (8)
  • 4 In Diameter X 1/2 In Depth (3)
  • 4" (50)
  • 4-1/16 In Diameter X 4 In Depth (1)
  • 4-11/16" (27)
  • 5 In Diameter (1)
  • 8-1/2 In X 8-1/2 In X 4 In (1)
  • 8-13/16 In Length (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (1)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (1)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Show More...

• Mounting

  

  • (1) Screw Ear (2)
  • (2) Screw Ear (2)
  • 1 inch NPT (4)
  • 1/2 In S Bracket (2)
  • 1/2 In Setback VP Bracket (2)
  • 1/2 inch NPT (3)
  • 2 inch NPT (1)
  • 3/4 inch NPT (4)
  • 5/8 In Setback S Bracket (4)
  • 7/8 In Setback S Bracket (1)
  • C BRACKET (3)
  • Clamp and Screw (1)
  • Conduit (65)
  • EAR (13)
  • FLUSH (16)
  • Hold Tite Bracket (1)
  • Hold Tite, Ear (1)
  • PAD (28)
  • Rigid Conduit (6)
  • SCREW (2)
  • SNAP BRACKET (1)
  • STUD (1)
  • SURFACE (20)
  • Surface/Flush (2)
  • VMS Bracket (2)
  • VS Bracket (1)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Show More...

• Depth

  

  • 1-1/2 (20)
  • 1-1/8 (5)
  • 1-7/8 (2)
  • 2-1/2 (6)
  • 2-1/8 (21)
  • 2-3/4 (4)
  • 3-1/2 (5)
  • 4.13 (2)
  • 4.5 (1)
  • 6.1 (1)
  • 7 (1)
  • Show More...

• Knockouts

  

  • (1) 1/2 in (18)
  • (1) 1/2 in_(1) 1/2 in (16)
  • (1) 1/2 in_(1) 3/4 in (1)
  • (1) 1/2 in_(2) 1/2 in (2)
  • (1) 1/2 in_(2) 3/4 in (2)
  • (1) 1/2 in_2-cable (1)
  • (12) 1/2" (1)
  • (2) 1/2 in, (2) 1/2 in, (1) 3/4 in E (12)
  • (2) 1/2 in, (2) 3/4 in (1)
  • (2) 1/2 in, (2) 3/4 in_(1) 1/2 in, (1) 3/4 in (1)
  • (2) 1/2 in, (2) 3/4 in_(2) 1/2 in, (2) 3/4 in (3)
  • (3) 1/2 in (6)
  • (3) 1/2 in, (2) 3/4 in (19)
  • (4) 1/2 in, (4) 3/4 in_(2) 1/2 in, (2) 3/4 in (1)
  • (4) 1/2 in, (4) 3/4 in_(4) 1/2 in, (4) 3/4 in (1)
  • (4) 1/2" (2)
  • (4) 3/4";(8) 1/2" (2)
  • (5) 1/2 in (4)
  • (6) 1/2 in and 3/4 in concentric_(2) 1/2 in and 3/4 in concentric (1)
  • (6) 1/2 in, (4) 3/4 in_(1) 1/2 in, (1) 3/4 in (4)
  • (6) 1/2 in, (4) 3/4 in_(1) 3/4 in, (1) 1 in (4)
  • (6) 1/2 in, (6) 3/4 in_(6) 1/2 in, (6) 3/4 in (1)
  • (8) 1/2 in, (8) 3/4 in_(8) 1/2 in, (8) 3/4 in (1)
  • (8) 1/2" (1)
  • (8) 1/2", (4) 1/2", (1) 3/4" E (1)
  • (8) 1/2", (4) 3/4" (3)
  • (8) 3/4" (1)
  • 1/2" and 3/4" double row (2)
  • 1/2" and 3/4" single row (2)
  • Electrogalvanized Steel (1)
  • For Airport, Healthcare, Petroleum And Convenience Store, Restaurant And Hospitality (1)
  • Show More...