Narrow By:

• Manufacturer: Klein

• Product Type

  

  • #0 PH Mini Screwdriver 3" Shank (1)
  • #2 Insulated Screwdriver 4" Shank (1)
  • #2 PH Screw Holding Screwdriver (1)
  • #2 Phillips Screwdriver Rapi-Driv® (1)
  • 1/16" Keystone Mini Screwdriver 2" (1)
  • 1/2" Nut Driver 6" Hollow Shaft (1)
  • 1/4" Magnetic Nut Driver 3" Shaft (1)
  • 1/4" Magnetic Nut Driver 6" Shaft (1)
  • 1/4" Nut Driver 3" Shaft Cushioned (1)
  • 1/4" SL Power Drivers 1" Bit PK 5 (1)
  • 1/4" SL Power Drivers 3-1/2" PK 5 (1)
  • 1/8" Cab Tip Mini Screwdriver 6" (1)
  • 1/8" Cab Tip Mini Screwdriver 8" (1)
  • 10 Pocket Tool Pouch Knife Snap (1)
  • 10" Adj. Wrench Extra-Capacity (1)
  • 100' Grooved Fiberglass Fish Tape (1)
  • 100' MG FBG Fish Tape W/ Leader (1)
  • 11-In-1 Impact Rated Driver (1)
  • 11-In-1 Ratcheting Impact Driver (1)
  • 12 Pocket Tote W/Shoulder Strap (1)
  • 12" Adj. Wrench Extra Capacity (1)
  • 12" Bi-Metal Blades, 100-PK (1)
  • 12" Bi-Metal Blades, 10-PK (1)
  • 24" (610 MM) Canvas Tool Bag (1)
  • 240' Stainless Steel Fish Tape (1)
  • 27-In-1 Precision Screwdriver (1)
  • 2-In-1 Nut Driver, 3" Slide Driver (1)
  • 2-In-1 Nut Driver, Hex, 1/4", 5/16" (1)
  • 3/16" Cab Tip Screwdriver Rapi-Driv (1)
  • 3/16" Cabinet Tip Screwdriver 3" (1)
  • 3/16" Cabinet Tip Screwdriver 8" (1)
  • 3/16" Nut Driver 3" Hollow Shaft (1)
  • 3/16" Screw Holding Screwdriver 3" (1)
  • 3/16" SL Drivers 3-1/2" Bit PK 5 (1)
  • 3/16" SL Power Drivers 1", PK 5 (1)
  • 3/32" Slotted Precision Screwdriver (1)
  • 3/8" Drive Socket Wrench Set, 20 PC (1)
  • 3/8" Magnetic Nut Driver 3" Shaft (1)
  • 3/8" Nut Driver 3"Hollow Shaft (1)
  • 30' Double Hook Tape Measure (2)
  • 32" Standard Cable Cutter (1)
  • 3-In-1 Impact Flip Socket (2)
  • 3-In-1 Impact Flip Socket Set, 2 PC (1)
  • 400 LM Rechargeable Auto-Off Headlamp (1)
  • 5 Pocket Tool Pouch Canvas (1)
  • 5/16" Magnetic Nut Driver (1)
  • 5/16" Nut Driver 6" Hollow Shaft (1)
  • 6" (152 MM) Pump Pliers (1)
  • 7/16" Magnetic Nut Driver 6" Shaft (1)
  • 7/16" Nut Driver 6" Hollow Shaft (1)
  • 7/16" Power Nut Driver 5" Length (1)
  • 7-Pocket Tool Pouch (1)
  • 8 Pocket Tool Pouch Slotted (1)
  • 8-In-1 Slide Driver Screw/Nutdriver (1)
  • 9" Pliers, Side Cut, Tape Pull (1)
  • 9/16" Nut Driver 6" Hollow Shaft (1)
  • A2 Cut Knit Dipped Gloves, L, 2-PR (1)
  • A4 Cut Knit Dipped Gloves, L, 2-PR (1)
  • A4 Cut Knit Dipped Gloves, M, 2-PR (1)
  • Ac/DC Digital Clamp Meter, 400a (1)
  • Accu-Bend(TM) Conduit and Pipe (2)
  • Adj. Length Blade, SQ #1, #2 (1)
  • Adj. Wrench Extra Capacity 8-1/4" (1)
  • Adjustable Wrench (3)
  • Aerial Oval Bucket 15 Pocket, Hooks (1)
  • Afci /Gfci Outlet Tester (1)
  • All Purpose Diagonal Cutting Pliers (1)
  • Apprentice Tool Set, 6 PC (1)
  • Assembled Conduit Bender (3)
  • Backpack Cooler (1)
  • Black Light Lockback Knife 2-1/4" (1)
  • Black Nylon Zipper Bag (1)
  • Blades For Large Cable Strippers (1)
  • Cabinet Tip Mini Screwdriver (2)
  • Cabinet Tip Screwdriver (3)
  • Cable Cutter (2)
  • Cable Splicer Knife Holder Tunnel (1)
  • Camouflage Zipper Bag (1)
  • Can Wrench, 3/8" and 7/16" Hex Nut (1)
  • Canvas Bag (2)
  • Canvas Zipper Bag (3)
  • Canvas Zipper Bag, Consumables, BL (1)
  • Cap Visor Light (1)
  • Circuit Breaker Finder Accy Kit (1)
  • Clamp Meter Electrical Test Kit (1)
  • Coated Socket Set, 12-Point, 6 PC (1)
  • Combination Square, 12" (1)
  • Combination Stripping and Cutting Tool (1)
  • Combo Knife and Scissors Sharpener (1)
  • Conduit And Pipe (2)
  • Conduit Bender (1)
  • Conduit Locknut and Reaming Pliers (1)
  • Conduit Locknut Wrench, 1/2", 3/4" (1)
  • Conduit Reamer (1)
  • Conduit Reamer Drill Head (1)
  • Crimping Tool (1)
  • Crimping/Cutting Tool (2)
  • Crimping/Cutting Tool For Terminals (1)
  • Cushion-Grip Scratch Awl (1)
  • Cushion-Grip Screwdriver Set (1)
  • Cut Resistant Glove (2)
  • Cutting Plier (2)
  • Diagonal Cutting Plier (5)
  • Diagonal Cutting Pliers Heavy Duty (1)
  • Digital Clamp Meter (3)
  • Digital Clamp Meter With Temp (1)
  • Digital Multimeter (1)
  • Digital Multimeter, Manual 600V (1)
  • Digital Multimeter, TRMS Auto 1000V (1)
  • Dual Range Non-Contact Volt Tester (1)
  • Dual-Laser Infrared Therm, 20:1 (1)
  • Dual-Wire Stripper/Cutter (1)
  • Eight-Key Inch Folding Hex Key Set (1)
  • Electrician Tool Set (1)
  • Electrician'S Pocket Knife (1)
  • Electrician's Scissor (2)
  • Electrician's Tool Belt (6)
  • Electricians Tool Set (1)
  • Electronic Ac/DC Voltage Tester (2)
  • Electronic Diagonal Cutting Pliers (1)
  • Electronics Screwdriver 4-In-1 (1)
  • Five-Key Inch Folding Hex Key Set (1)
  • Flex Bit Kit (1)
  • Flexible Ac Current Clamp Meter (1)
  • Flip Impact Socket Set, 7-Piece (1)
  • Flush Cutter, Lightweight, 5" (1)
  • Folding Hex Key Set (3)
  • Folding Utility Knife (2)
  • Gfci Receptacle Tester With LCD (1)
  • Hard Hat, Non-Vented Brim Style (1)
  • Hard Hat, Non-Vented Brim, Headlamp (1)
  • Hard Hat, Non-Vented Cap Style (1)
  • Hard Hat, Non-Vented Cap W/Headlamp (1)
  • Hard Hat, Vented Brim W/Headlamp (1)
  • Hard Hat, Vented Full Brim Style (1)
  • Heavy Duty Diagonal Cutting Pliers (1)
  • Heavy Duty Side Cutting Pliers (2)
  • High Lev. Pliers, HD Side Cut, 9" (1)
  • High Leverage Cable Cutter (2)
  • High Tension Hacksaw (1)
  • High-Leverage Cable Cutter (3)
  • Hole Cutter (2)
  • Hole Saw (1)
  • Idc Connector Crimping Pliers (1)
  • Insul Changeable Drivers W/ Pouch (1)
  • Iron Conduit Bender (2)
  • Iron Conduit Bender 1/2" Emt (1)
  • Iron Conduit Bender 3/4" Emt (1)
  • Jab Saw (1)
  • Journeyman Diagonal Cutting Pliers (1)
  • Journeyman Pump Pliers (1)
  • Keystone-Tip (3)
  • Klein-Kurve Wire Stripper, Cutter (1)
  • Klein-Kurve® Wire Stripper/Cutter (1)
  • Large Cable Stripper (750-350 MCM) (1)
  • Laser Distance Measurer, 200' (1)
  • Lockouts Interlock Tabs 1-1/2" Dia (1)
  • Long Nose Plier (2)
  • Long Nose Pliers Side Cutting (2)
  • Long Nose Side Cut Plier (2)
  • Long Nose Side Cut Pliers, 7-1/2" L (1)
  • Magnetic Hanger (2)
  • Master Electricians Hole Cutter Kit (1)
  • Mid-Flex Glow Rod Set (2)
  • Modbox™ 18 Pocket Tool Pouch (1)
  • Modbox™ 8 Pocket Tool Pouch (1)
  • Modbox™ 9 Pocket Tool, Parts Pouch (1)
  • Modbox™ Drill Pouch (1)
  • Modbox™ Open Tool Pouch (1)
  • Modbox™ Tool Belt Pouch Clips, 3 PK (1)
  • Modbox™ Utility Cart (1)
  • Multi-Bit Screwdriver and Nut Driver (5)
  • Multi-Groove Fish Tape, 200 FT (1)
  • Multimeter, TRMS Auto, 600V, Temp (1)
  • Multi-Purpose Hybrid Pliers (1)
  • Nine-Key Inch Folding Hex Key Set (1)
  • Non-Contact Volt Tester/Thermometer (1)
  • Non-Contact Voltage Tester (3)
  • Non-Contact Voltage Tester 50-1000V (1)
  • Nut Driver (1)
  • Nut Driver Cushion-Grip (1)
  • Nut Driver Set (4)
  • Nut Driver Sets (2)
  • Phillips Screwdriver (3)
  • Phillips-Tip (3)
  • Phone Holder (3)
  • Phone Holder with Belt Clip (3)
  • Pocket Knife (2)
  • Pocket Knife 2-1/4" Coping Blade (1)
  • Pocket-Sized Knife Sharpener (1)
  • Pro Folding Hex Key Set (1)
  • Pull Tape, 2500 LB X 1000 FT (1)
  • Pump Plier (3)
  • Quick-Rotating (2)
  • Receptacle Tester (2)
  • Rechargeable Flashlight With Laser (1)
  • Rechargeable Light Array Headlamp (1)
  • Rechargeable Thermal Imaging Camera (1)
  • Replacement Bit (3)
  • Replacement Bits, Square, #1, #2 (1)
  • Replacement Blade (1)
  • Replacement Plier Handle (2)
  • Replacement Tap (1)
  • Replacement Tap For 625-32, 627-20 (1)
  • Reusable Cooler Ice Packs, 2-Pack (1)
  • Scissors and Knife Holder W/ Loop (1)
  • Scout® Pro 3 Tester Starter Kit (1)
  • Screwdriver (2)
  • Screwdriver And Nutdriver (2)
  • Screwdriver Cushion-Grip 7" (1)
  • Screwdriver Set (2)
  • Screwdriver Set 3/16" SL #2 PH 2-PC (1)
  • Screwdriver, Insul, #3 PH, 7" L (1)
  • Screwdriver, Insulated 3/16" Cab 7" (1)
  • Screwdriver, Insulated, 1/4" Cab 4" (1)
  • Screwdriver/Nut Driver (2)
  • Self-Leveling Cross-Line Laser Level and Plumb Spot (1)
  • Serrated Duct Knife (1)
  • Side Cut Stripping Crimping Pliers (1)
  • Side Cutting Plier (1)
  • Side Cutting Pliers (1)
  • Slim Digital Multimeter, 600V, Temp (1)
  • Spring-Assisted Open Pocket Knife (1)
  • Standard Pump Pliers (3)
  • Step Drill Bit (1)
  • Straight-Claw Hammer, 16 Oz, 13" (1)
  • Straight-Claw Hammer, 18 Oz, 15" (1)
  • Strap (1)
  • Tapping Tool (1)
  • Test Lead Set (1)
  • T-Handle Set With Stand (2)
  • Tool Kit (1)
  • Torpedo Level (1)
  • Tote (2)
  • Tradesman Pro Phone Holder XX-Large (1)
  • Tradesman Pro Tool Master Backpack (1)
  • Tradesman Pro™ Lighted Tool Bag (1)
  • Tradesman Pro™ Tech Bag (1)
  • Tradesman Pro™ Work Light (1)
  • Triple Taps 6-32, 8-32, 10-32 (1)
  • Utility Blades, 10 PC (1)
  • Utility Glove (3)
  • Utility Knife Blade (1)
  • Wire Crimper, Cutter, Stripper Tool (1)
  • Wire Pulling Glove (2)
  • Wire Stripper (2)
  • Wire Stripper and Cutter (2)
  • Wire Stripper With Glow Grips (1)
  • Wire Stripper/Cutter (3)
  • Wire Stripper/Wire Cutter (3)
  • Show More...

• Blade Material

  

  • — (1)
  • 420HC Stainless Steel (1)
  • 440A Stainless Steel (9)
  • AUS 8 Stainless Steel (5)
  • AUS 8 Stainless-Steel (1)
  • Bi-Metal (1)
  • Black Oxide Steel (1)
  • Canvas (1)
  • CARBON STEEL (2)
  • Chrome Vanadium Steel (1)
  • Drop Forged Hardened Tempered Alloy Steel (1)
  • Forged Steel (3)
  • Hardened Carbon Steel (1)
  • Hardened Steel (1)
  • Heavy Duty Steel (1)
  • Induction Hardened Steel (3)
  • Stainless Steel (5)
  • Steel (38)
  • Strong;Tough Tempered Steel (1)
  • Show More...

• For Use With

  

  • 10-in-1 Screwdriver Driver (32477);11-in-1 Screwdriver Driver (32500);10-Fold(TM) (2)
  • 10-in-1, 11-in-1 and 10-Fold™ (1)
  • 1-1/4" Bender Head (Cat. No. 56211) (1)
  • 11-in-1 and 11-in-1 Magnetic Multi-Bit Screwdriver / Nut Drivers (Cat. Nos. 32500, 32500-MAG) (1)
  • 3/4 (19.1 mm) and LargerOverall Length54 (137.2 cm) (1)
  • 31906 (1)
  • 32559 (Extended Reach) (1)
  • 4-in-1 Electronics Screwdriver (32581, 32585) (2)
  • 93116 (1)
  • All Klein Meter;Multimeter;Clamp Meter (1)
  • Any Clamp or Digital Multimeter that Measures Temperature (2)
  • Cable Skinning Utility Knife (44218) (1)
  • Cables;Cords;Circuit Breakers;Lighting Fixtures;Switches;Outlets;Wires (3)
  • Cat. No. 32751 and 32708 (1)
  • Cat. No. 56009, 56010 & 56014 (1)
  • Cat. Nos. 625-32, 626, 627-20 (1)
  • Cat. Nos. 626, 627-20 (1)
  • Cell Phones with Cases up to 6.25" x 3.5" x 0.75" (15.88 x 8.89 x 1.9 cm) (2)
  • Cell Phones with Cases up to 7" x 3.75" x 0.75" (17.78 x 9.53 x 1.9 cm) (1)
  • Clamp (3)
  • Click Lock™ Modular System (1)
  • Digital Circuit Breaker Finders Cat. Nos. ET300, ET310 (1)
  • Extended Reach (32559) (1)
  • Fish Tape (1)
  • Fit into Power Drill Chucks and Quick Release Adapters (1)
  • For 7 in (1)
  • For 8 to 9 in (1)
  • For use with Klein Tools MM300;MM400;MM600;MM700 Multimeters;CL600;CL700;CL800 Clamp Meters (1)
  • Heavy Duty (32557) and Ratcheting (32558) (1)
  • Impact Drivers (1)
  • Impact Drivers (1)
  • iPhone 6, 7, 7s, 8, X, Samsung Galaxy® S3, S4, S7, and similar sized phones (1)
  • iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • Klein Cable-splicer's Knife (1)
  • Klein Electrician's Scissors and Cable-splicer's Knife (1)
  • Klein Tools Clamp Meters, Digital Multimeters, and other Test and Measurement Products (1)
  • Klein Tools Large Cable Strippers (Cat. Nos. 21050 and 21051) (1)
  • Klein Tools Meters or Any Brand of Multimeter or Clamp Meter Requiring Test Leads (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 4, 5 (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • MM1000, MM1300, MM2000, MM2300 (1)
  • MODbox™ Tool and Part Pouches (1)
  • Modular Tool Belt and Wall Rack (3)
  • Smart Phones;Tablets;Computers;Other Audio Devices (1)
  • Standard and GFCI Receptacle (1)
  • Strips and Crimps Twisted Pair;Ethernet;RJ45 Voice and Data Cables (1)
  • Tool Belts (3)
  • Tool Belts up to 2.5" Wide and MODbox™ Rail System (6)
  • Voice, Data, Video, NM (Romex®) Nonmetallic Sheathed Cable (1)
  • Show More...

• Tip Size

  

  • #0 (1)
  • #0;#00 (Phillips Bits);1/8 in;3/32 in (Slotted) (1)
  • #1 (3)
  • #1, #2 (Philips Bits);1/4 in;3/16 in (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm) (Slotted Bits); (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm)(Slotted Bits);#1, #2(Square Bits);T10, T15(Torx(R) Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bit) (1)
  • #1, #2 (Phillips Bits);3/16 in (4.8 mm);1/4 in (6.4 mm) (Slotted Bits) (1)
  • #1, #2 Square (1)
  • #2 (12)
  • #2 (Phillips Bits);1/4 in;6.4 mm (Slotted Bits);#1, #2 (Square Bits) (1)
  • #2 Phillips and 1/4" (6.4 mm) Slotted, #1 Phillips and 3/16" (4.8 mm) Slotted, #1 and #2 Square (1)
  • #2;1/4 in (2)
  • #3 (2)
  • (8) screwdrivers:#1 ph, #2 ph, 1/4 in slotted, 3/16 in slotted, T10 Torx, T15 Torx, #1 Square-Recess, #2 Square-Recess (2) Nut Drivers:5/16 in, 1/4 in (1)
  • 1/16" (1)
  • 1/20 in;1/16 in;5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in (1)
  • 1/4 in;6.4 mm (4)
  • 1/4 in;6.4 mm (Slotted) (1)
  • 1/4" (6.4 mm) (6)
  • 1/4", 5/16" (3)
  • 1/4, 5/16 (1)
  • 1/8 in;3.2 mm (2)
  • 1/8" (3.2 mm) (2)
  • 12 in;12.7 mm (1)
  • 3/16 in;4.8 mm (3)
  • 3/16 in;4.8 mm (Slotted Replacement Bits) (1)
  • 3/16 in;4.8 mm;1/4 in;6.4 mm (Slotted Tip) (1)
  • 3/16 in;7/32 in;1/4 in;5/16 in;3/8 in (1)
  • 3/16" (4.8 mm) (5)
  • 3/16" (4.8 mm); 1/4" (6.4 mm) (1)
  • 3/32 in;2.4 mm (1)
  • 3/32" (2.4 mm) (1)
  • 3/8 in;10 mm (1)
  • 3/8" (9.5 mm) (1)
  • 5/16 (0.8 cm)Weight8 oz (227 g) AD6.027720201103C092644852763000926448527638527627111728Brand NameKlein ToolsIncluded7 Screwdrivers, #1 Phillips, #2 Phillips, 1/4, 5/16", 1/8 (6.4 mm to 3.2 mm) Cabinet Tip 3" (76.2 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 4" (101.6 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 6" (152.4 mm) Shank, and CaseNumber of Pieces7Weight1.1 lb (0.5 kg) AD6.027720201103C092644854842000926448548428548427111728Brand NameKlein ToolsIncluded604-3, 606-2, 607-3 and 608-3InsulatedNoMagneticN0Sub BrandCu (1)
  • 5/16 in;7.9 mm (4)
  • 5/16" (7.9 mm) (1)
  • 5/32" (4 mm) (1)
  • 5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in;3/16 in;7/32 in;1/4 in (1)
  • Cabinet Tip: 1/4" (6.4 mm), 3/16" (4.8 mm); Phillips: #2; Square Tip: #2 (1)
  • Show More...

• Blade Length

  

  • — (1)
  • 0.625 in;15.9 mm (Knief Length) (1)
  • 0.75 in;19.05 mm (1)
  • 0.781 in (Knife);19.8 mm (Knife) (1)
  • 1.5" (3.8 cm) (1)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 in;304.8 mm (1)
  • 1-3/4 in;44.5 mm (1)
  • 16 ft (1)
  • 2.0" (4.9 cm) (1)
  • 2.25" (5.7 cm) (3)
  • 2.4" (6.1 cm) (1)
  • 2.5 in;63.5 mm (2)
  • 2.563" (6.5 cm) (1)
  • 2.625" (6.7 cm) (1)
  • 2.8 in;71 mm (1)
  • 2.95" (6.4 cm) (1)
  • 2-1/2 in;63.5 mm (3)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 2-5/8 in;66.7 mm (1)
  • 2-7/16 in (61.9 mm) x 0.025 in (0.6 mm) (1)
  • 3.375" (8.6 cm) (1)
  • 3.4" (8.6 cm) (1)
  • 3.5" (8.9 cm) (2)
  • 3.75" (9.5 cm) (1)
  • 3-1/2 in;89 mm (2)
  • 4 to 8 in (1)
  • 5.2" (13.2 cm) (1)
  • 5.5" (14 cm) (1)
  • 5/8 in;15.9 mm (Knief Length) (4)
  • 6 in;152.4 mm (3)
  • 6" (15.2 cm) (2)
  • 7 in (1)
  • 9 in;228.6 mm (2)
  • Show More...

• Voltage Rating

  

  • 1000 V ac/dc (2)
  • 110/125 V ac (1)
  • 12 to 1000 V ac (2)
  • 50 to 1000 V ac (1)
  • 600 V ac/dc (1)
  • Show More...

• Battery Type

  

  • 2 x AAA Alkaline (2)
  • 3 x 1.5V AA Alkaline (1)
  • Show More...

• Cutting Capacity

  

  • #14 to #10 AWG (Solid);#16 to #12 AWG (Strand) (1)
  • #19 to #23 AWG (2)
  • 1 in (1)
  • 1" (2.5 cm) O.D. Multilayer Plastic Tubing and Up To 3/4" (1.9 cm) Schedule 40 PVC (1)
  • 1/8" to 5/8" (0.3 to 1.6 cm) (1)
  • 10 Solid or 12 Stranded (1)
  • 10-18 AWG Stranded (1)
  • 10-22 AWG Insulated and Non-Insulated Terminals (2)
  • 10-22 AWG Non-Insulated Terminals (1)
  • 1-1/2 in;38 mm (1)
  • 1-3/16 in (1)
  • 1-3/8 in (1)
  • 1-3/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (Diameter) (1)
  • 1-5/16 in;33.3 mm (1)
  • 18 gauge Steel and 22 gauge Stainless Steel (1)
  • 2-1/8 in;54 mm (2)
  • 3/4 in (2)
  • 3/8 in (Flexible Conduit);#10;#12;#14 (Armored Cable) (1)
  • 4/0 (Aluminum);2/0 (Soft Copper);24 AWG (100-Pair Communications Cable) (1)
  • 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable (2)
  • 4/0 Aluminum;2/0 Soft Copper;100-Pair 24 AWG Communications Cable (1)
  • 5/16 in;23.8 mm (1)
  • 6 in (Pipe) (1)
  • 8-18 AWG Solid; 10-20 AWG Stranded (1)
  • Copper:600 MCM;300 sq.mm;Aluminum:750 MCM;380 sq.mm;Communication Cable:1-1/8 in;28.6 mm (1)
  • Up to 1/0 AWG Aluminum and Copper (1)
  • Show More...

• Accuracy

  

  • +/- (2% + 2V) (1)
  • +/- 0.029° (7)
  • +/- 1/16" up to 33' (+/-0.2 cm to 10 m); +/- 1/8" up to 100' (+/-0.3 cm to 30 m) (1)
  • +/- 1/16" up to 33' (+/-0.2 cm to 10 m); +/- 1/8" up to 200' (+/-0.3 cm to 61 m) (1)
  • +/- 4° F or +/- 2%; Accuracy Below Freezing is +/- 4° F Plus 0.2 Degrees Per Degree Below 32° F (1)
  • +/-1.0 + 3 digits (1)
  • +/-2°C or 2% (whichever is greater). Not calibrated below 10°C (14°F) (1)
  • +/-3/16" per 33' (+/-4.7 mm per 10 m) (1)
  • +/-4% (1)
  • ±3/32" per 33' (±2 mm per 10 m) Vertical & Horizontal Beams, ±1/8" per 33' (±3 mm per 10 m) Plumb Up Spot, ±5/32" per 33' (±4 mm per 10 m) Plumb Down Spot (1)
  • ±3°C (±5.4°F) or 3%, Whichever is Greater (1)
  • 1/16" from 2" to 32.8'; 1/8" from 32.8' to 65.6' (1)
  • -40 to 0° C: +/-2°; 1 to 300° C: +/- 1°C (1)
  • Approximately 70 to 100% of Indicated Voltage, Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V) (1)
  • At More Than 212°F (100°C): +/- 2° or 2% (Whichever is Greater); At Less Than 212°F (100°C): +/- 3° or 3% (Whichever is Greater) (1)
  • Bullseye Orientation: +/- 0.5°;Vertical and Horizontal Orientation: +/- 0.2° (1)
  • IR: 32° F and Above: +/- 3° F or +/- 1.5% (Whichever is Greater); Less Than 32° F: +/- (3.6° F + 0.2° F per Degree); K-Type: 32° F and Above: +/- 2° F or +/-% (Whichever is Greater); Above 32° F: +/- 3° or +/1% (Whichever is Greater) (1)
  • Room Temperature Accuracy of +/- 2.7°F (+/- 1.5°C) (1)
  • See Instructions (2)
  • Spot: +/-0.02" (+/-0.5 mm) at 39.4" (1 m) from Level;Vials: 0.043° (1)
  • Typically at >90% of the Indicated Range (Except for 24V AC / 32V DC, >95% of Range) (1)
  • Voltage +/- 2% (1)
  • Show More...

• Material

  

  • — (3)
  • 100% Polyester (1)
  • 100% Polyester Tape Lubricated with Ethylene Glycol and Water (1)
  • 1095 Steel (1)
  • 1680d (6)
  • 1680d Ballistic Nylon, 2520d Ballistic Nylon Bottom (1)
  • 1680d Ballistic Polyester, 2520d Ballistic Polyester Bottom (1)
  • 1680d Ballistic Weave (25)
  • 1680d Ballistic Weave Body (1)
  • 1680d Ballistic Weave Body; Hard Molded Polypropylene Bottom (2)
  • 1680d Ballistic Weave, Mesh Interior (1)
  • 1680d Body; Hard Molded Polypropylene Bottom (1)
  • 1680d Polyester Body; Hard Molded Polypropylene Bottom (3)
  • 35% PU Foam, 25% Nylon, 20% Neoprene, 15% Polyester, 5% Natural Rubber Latex (2)
  • 4140 Steel (1)
  • 440A Stainless Steel (2)
  • 45% Nylon, 35% EVA Foam, 15% Polyester, 5% Natural Rubber Latex (2)
  • 600D Ballistic Weave (1)
  • 600d Nylon (1)
  • 91% Polyester, 5% Thermoplastic Polyurethane, 4% Spandex (1)
  • 98% Polyester, 2% Spandex (1)
  • ABS (5)
  • ABS and Electrical Components (3)
  • ABS and Electronic Components (2)
  • ABS housing and electronic components (1)
  • ABS Plastic (1)
  • ABS Plastic (Case) (1)
  • ABS Plastic Housing and Electronic Components (1)
  • ABS, Electrical Components (3)
  • ABS, Polycarbonate (1)
  • ABS, Steel (1)
  • ABS/Electronics (5)
  • ABS/PC, Electronic Components (1)
  • ABS/PC; Silicone Weave in Nylon Elastic Fabric (1)
  • Adjustable web belt (1)
  • ALLOY STEEL (4)
  • Alloy Steel;Reinforced Nylon (1)
  • Alloy Steel;Steel (3)
  • Aluminum (11)
  • Aluminum Body, Silicone Grip (1)
  • Aluminum Housing, Electronic Components (1)
  • Anodized Aluminum (3)
  • Anti-Slip Silicone Strap (1)
  • Ballistic Polyester and Leather (3)
  • Canvas (1)
  • Carbide (3)
  • Carbon Steel (2)
  • Carbon Steel Barrel (1)
  • Cast Alloy (1)
  • Cast Aluminum (2)
  • Cast Zinc Alloy (1)
  • Chrome Plated Carbon Steel (1)
  • CHROME VANADIUM STEEL (1)
  • Chrome-Vanadium Steel (1)
  • Cordura® (1)
  • Cordura® Ballistic Nylon (2)
  • Cordura® Camouflage (1)
  • Cordura® Fabric (1)
  • Denier Polyester (1)
  • Earcups: ABS + PC; Headband: POM + TPE (1)
  • FABRIC (6)
  • Fiberglass (14)
  • Forged Steel (5)
  • Glove: 90% Polyester, 10% Latex Liner: 92% Acrylic, 4% Polyester, 4% Latex Dip: 100% Latex (1)
  • Hardened Steel (5)
  • HDPE (1)
  • HEAT TREATED STEEL (1)
  • Heat-Treated Alloy Steel (1)
  • Heat-Treated Metal (1)
  • Heavy duty canvas (1)
  • Heavy-duty Anodized Aluminum (1)
  • High Speed Steel (11)
  • Housing: PVC; Clip: Ni-Plated Iron; Plug: Copper (1)
  • HPPE (6)
  • Induction Hardened Steel (16)
  • IRON (4)
  • Iron;Steel(Handle) (1)
  • LEATHER (12)
  • Magnesium Cast (1)
  • Neodymium Alloy (1)
  • Neoprene Impregnated Nylon (1)
  • No. 10 Canvas (2)
  • No. 10 Canvas with Brass Zipper (1)
  • No. 4 Canvas with Leather Back (1)
  • NO. 6 CANVAS (1)
  • No. 8 Canvas (2)
  • Nylon (1)
  • Nylon-Spandex (2)
  • PC & PC-ABS housing and electronic components (1)
  • PC/ABS (9)
  • PC/ABS Housing with Electronic Components (1)
  • PC/ABS; Silicone Rubber (2)
  • Plastic (5)
  • Plastic and Electronic Assemblies (2)
  • Plastic and Metal (1)
  • Plastic Case with Steel Blade (4)
  • Plastic Handle with Rubber Grips (1)
  • Plastic Housing, Electronic Compenents (1)
  • Plastic Housing, PCB with Electronic Components (2)
  • Plastic, Metal (1)
  • Plastic, Stainless Steel, Rare Earth Magnets (1)
  • Plastic/Electronics (4)
  • Poly Propelyne (1)
  • Polycarbonate (4)
  • Polyester (4)
  • Polyester, HPPE, Nitrile (1)
  • Polyethylene (1)
  • Polymer Body and Electronic Components (1)
  • Polypropylene (1)
  • Powder Metal (1)
  • PVC (1)
  • PVC Coated Polyester (1)
  • Robust Forged Steel (1)
  • S2 Steel (3)
  • S2 Tool Steel (1)
  • Shell: 100% Dry Acrylic; Lining: 65% Polyolefin / 35% Polyester (1)
  • Spandex (1)
  • Stainless Steel (8)
  • Stainless Steel Barrel (3)
  • Stainless Steel Probe (1)
  • Stainless Steel, Aluminum, Neodymium Magnets (1)
  • Stainless steel/Nylon Resin (1)
  • Stainless Steel;Hard Plastic;Rubber (1)
  • Steel (144)
  • Steel (Blade) (2)
  • Steel Alloy (2)
  • Steel and Fiberglass (1)
  • Steel Barrel (1)
  • Steel Bits (2)
  • Steel, Nylon, ABS Plastic (1)
  • Steel, Plastic (3)
  • Synthetic Leather (5)
  • Tempered Steel (1)
  • Thermocouple Wire with PVC Connector (1)
  • Thermoplastic; Electronics (1)
  • TOP GRAIN LEATHER (1)
  • TPE 40%, Neoprene 20%, EVA Foam 20%, Polyester 15%, Nylon 5% (1)
  • TPU and 1680d (1)
  • Show More...

• Display Type

  

  • LCD (4)
  • LED (5)
  • Show More...

• Cutting Material

  

  • Aluminum;Fiberglass;Plastic (1)
  • Copper (1)
  • Copper:500;Aluminum:750 (Cable) (1)
  • Jab Saw;Cuts Drywall;Wallboard;Plywood;and Plastic (1)
  • PVC (1)
  • Wood;Plastic;Stainless Steel;Mild Steel;Drywall;Ceiling Tile and Laminate Cut Material (1)
  • Show More...

• Drive Type

  

  • Hex (3)
  • Square-Shank (1)
  • Show More...

• Handle Material

  

  • — (1)
  • 1680D Ballistic Weave (4)
  • Acetate (3)
  • Aluminum (4)
  • Aluminum Die Cast (1)
  • Anodized Aluminum (8)
  • CA/TPE (1)
  • Canvas (2)
  • Contoured Plastic Over Hardened Steel (1)
  • Cordura(R) Camouflage (1)
  • Cushion Grip (3)
  • Cushion Grip Handle (2)
  • Double Dipped (1)
  • Fiberglass (6)
  • Hardened Tool Steel (1)
  • Heavy-Duty Rubber (2)
  • High-Dielectric Plastic (10)
  • Journeyman (2)
  • Nylon Resin (1)
  • Nylon/Rubber (1)
  • Plastic (21)
  • Plastic and Rubber (1)
  • Plastic Dipped Steel (8)
  • Plastic Grip (2)
  • Plastic-Dipped Steel (1)
  • Poly Propelyne (1)
  • Polyester (1)
  • Rubber (43)
  • Rubber, High-Dielectric Plastic (1)
  • Stainless Steel (3)
  • Steel (5)
  • Strong, Tough, Tempered Steel (1)
  • TPE/Steel (1)
  • Show More...

• Finish

  

  • Black Oxide (2)
  • Black Phosphate (1)
  • Chrome Plated (1)
  • Chrome Plated (Shaft) (1)
  • Chrome-Plated (1)
  • Heavy-Duty, Oversized, Plastic-Dipped (Handle) (1)
  • Journeyman (1)
  • Journeyman (Handle) (13)
  • Matte (1)
  • Plastic Dipped (Handle) (17)
  • Polished Black Oxide (1)
  • Polished;Black Oxide;Plastic-Dipped (Handle) (1)
  • Sand Blast with Oil Rub (1)
  • SATIN (2)
  • Steel (1)
  • Show More...

• Frequency Rating

  

  • 1 Hz to 500 kHz (2)
  • 1 to 500 KHz (1)
  • 50 Hz;60 Hz (1)
  • 50 to 500 Hz (3)
  • Show More...

• Color

  

  • Black (35)
  • Black (Handle) (23)
  • Black and Orange (3)
  • Black and Red (Handle) (2)
  • Black on Bright Red (1)
  • Black with Gray and Orange Trim (2)
  • Black with High-Visibility Yellow Trim (1)
  • Black with Orange/Gray (3)
  • Black, Gray, Orange Trim (1)
  • Black, Reflective Gray, Green Accents (1)
  • Black, Yellow, Red (1)
  • Black/Gray (3)
  • Black/Gray/Orange (3)
  • Black/Orange (6)
  • Black/Orange Piping (1)
  • Black/Orange/Gray (4)
  • Black;Red;Yellow;Green;Blue;Brown (handle) (2)
  • Black;Reflective Grey;Green Accents (1)
  • Black;Yellow (Handle) (1)
  • Blue (1)
  • Blue/Black (Handle) (1)
  • Brown (4)
  • Camo (1)
  • Camouflage (5)
  • Camouflage (Handle) (1)
  • Camouflage/Black (1)
  • Clear/White (1)
  • Dark Blue (Handle) (1)
  • Dark Blue/Black (Handle) (1)
  • Glow (Handle) (1)
  • Glow in the Dark (1)
  • Glow in the Dark (Handle) (1)
  • Gray (1)
  • Gray Knit, Black Coating, Black Trimmed Cuff (1)
  • Gray Knit, Black Coating, Orange Cuff Thread (1)
  • Gray with Orange (1)
  • Gray/Black (7)
  • Gray/Black, Blue/Black (1)
  • Gray;Orange (1)
  • High-Visibility Orange (1)
  • Light Blue (Handle) (1)
  • Light Blue/Black (Handle) (4)
  • Light Red (Handle) (1)
  • Maroon (2)
  • Natural (2)
  • Natural Tan/Black (2)
  • Natural/Brown (2)
  • Olive;Orange;Royal Blue;Yellow (1)
  • Orange (4)
  • Orange (Case) (1)
  • Orange and Black (Handle) (1)
  • Orange, Black, Gray (2)
  • Orange, Gray (1)
  • Orange/ Black (1)
  • Orange/Black (10)
  • Orange/Black; Gray/Black (1)
  • Orange;Black (1)
  • Red (Handle) (2)
  • Red;Black (Handle) (3)
  • Red;Gray;Black;Brown (1)
  • Royal Blue (1)
  • Silver (2)
  • Silver (Handle) (3)
  • Solid Blue (Handle) (1)
  • Tan (3)
  • Transparent Red (Handle) (2)
  • White (1)
  • White Tape with Black Markings (1)
  • Yellow (Handle) (9)
  • Yellow and Black (Handle) (2)
  • Yellow/Black (4)
  • Yellow;Black (1)
  • Yellow;Black (Handle) (10)
  • Show More...

• Number Of Pieces

  

  • 1 (6)
  • 10 (4)
  • 11 (4)
  • 12 (2)
  • 14 (1)
  • 15 (1)
  • 2 (4)
  • 20 (1)
  • 27 (1)
  • 3 (5)
  • 4 (8)
  • 40 (2)
  • 5 (6)
  • 6 (8)
  • 7 (9)
  • 8 (3)
  • 9 (1)
  • Show More...

• Teeth Per Inch

  

  • 10 (1)
  • 18 (2)
  • 24 (3)
  • 8 (2)
  • Show More...

• Overall Width

  

  • 0.06" (0.2 cm) (1)
  • 0.188" (0.5 cm) (1)
  • 0.19" (0.5 cm) (1)
  • 0.25" (0.6 cm) (1)
  • 0.3" (0.8 cm) (3)
  • 0.45" (1.1 cm) (1)
  • 0.5 (1.3 cm)Weight0.80 oz (22.7 g) AD6.027720201103C092644441905000926444419054420027111503Brand NameKlein ToolsBlade Length1.75 (4.5 cm) (1)
  • 0.5 in;12.7 mm (2)
  • 0.5" (1.3 cm) (2)
  • 0.5" to 0.88" (1.3 to 2.2 cm) (1)
  • 0.516 in;13.1 mm (2)
  • 0.6" (1.5 cm) (2)
  • 0.62" (1.6 cm) (1)
  • 0.69" (1.8 cm) (1)
  • 0.7" (1.8 cm) (1)
  • 0.71" (1.8 cm) (1)
  • 0.72" (1.8 cm) (3)
  • 0.73" (1.9 cm) (1)
  • 0.75" (1.9 cm) (1)
  • 0.75" (1.2 cm) (1)
  • 0.75" (2 cm) (1)
  • 0.76" (2 cm) (1)
  • 0.8" (2 cm) (2)
  • 0.813 in;20.7 mm (1)
  • 0.813" (2.1 cm) (1)
  • 0.84" (2.1 cm); 1.25" (3.2 cm) (1)
  • 0.85" (2.2 cm) (2)
  • 0.88" (2.2 cm) (2)
  • 0.9" (2.2cm) (1)
  • 0.938 in;23.8 mm (1)
  • 0.96" (2.4 cm) (2)
  • 0.984" (2.5 cm) (1)
  • 1 (2.5 cm)Style_NameStandardTether CapableNoTypeIronworker's PliersWeight0.7 oz (308 g) AD6.027720201102C09264472049900092644720499D248-9STT27112114Brand NameKlein ToolsApplicationSoft Annealed Rebar Tie WireCut StyleStandardCutting KnivesStandardHandle ColorRedHandle FinishPlastic DippedHandle Length6.125 (15.6 cm) (1)
  • 1 in;25.4 mm (4)
  • 1" (2.5 cm) (2)
  • 1" (2.5 cm) (5)
  • 1.05" (2.7 cm) (1)
  • 1.06" (3 cm) (1)
  • 1.08" (2.7 cm) (1)
  • 1.09" (2.8 cm) (2)
  • 1.1 in;28 mm (1)
  • 1.1" (2.8 cm) (1)
  • 1.11" (2.8 cm) (1)
  • 1.125" (2.9 cm) (1)
  • 1.17 (3 cm)Quick Release—Range—Set / IndividualSet: 1/4 and 5/16" Nut Driver; 1/4 Socket Adapter; #1 and #2 Phillips; 3/16" and 1/4 Slotted Drive Bits (1)
  • 1.17" (3 cm) (1)
  • 1.21" (3.1 cm) (1)
  • 1.234" (3.1 cm) (1)
  • 1.24" (3.2 cm) (3)
  • 1.25" (3.2 cm) (2)
  • 1.25" (3.2 cm) (8)
  • 1.28" (3.3 cm) (1)
  • 1.297 (3.3 cm)Special FeaturesIncludes 50 BladesType1.0 lb (0.5 kg)Weight1.0 lb (0.45 kg) AD6.027720201103C092644440243000926444402434413027111503Brand NameKlein ToolsBlade Material440A Stainless SteelHandle ColorOrange/BlackHandle MaterialRubberLength Closed4.125 (10.5 cm) (1)
  • 1.297" (3.3 cm) (1)
  • 1.3" (3.3 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.36" (3.5 cm) (1)
  • 1.37" (3.5 cm) (1)
  • 1.39" (3.5 cm) (With Transmitter docked in Receiver) (1)
  • 1.4" (3.5 cm) (1)
  • 1.4" (3.6 cm) (1)
  • 1.42" (3.6 cm) (5)
  • 1.45" (3.7 cm) (1)
  • 1.476 in (2)
  • 1.48 in (1)
  • 1.5" (3.8 cm) (5)
  • 1.50" (3.8 cm) (2)
  • 1.6 in (1)
  • 1.6" (4.1 cm) (1)
  • 1.61" (4.1 cm) (2)
  • 1.67" (4.2 cm) (1)
  • 1.7" (4.2 cm) (1)
  • 1.7" (4.3 cm) (1)
  • 1.78" (4.5 cm) (1)
  • 1.8 in (1)
  • 1.8" (4.6 cm) (1)
  • 1.84" (4.7 cm) (1)
  • 1.88" (4.8 cm) (2)
  • 1.891" (4.8 cm) (1)
  • 1.9" (4.8 cm) (1)
  • 1.9" (4.8) (1)
  • 1.9" (5 cm) (2)
  • 1.95 in (1)
  • 1/2 in;13 mm (1)
  • 10" (25.4 cm) (1)
  • 10.25" (26 cm) (2)
  • 10.7" (27.2 cm) (6)
  • 10-1/4 in;260.4 mm (1)
  • 11" (27.9) (2)
  • 12" (30.5 cm) (1)
  • 12.25" (31.1 cm) (1)
  • 12.35" (31.4 cm) (4)
  • 12.5 in;318 mm (1)
  • 12.5" (31.8 cm) (2)
  • 12.5" (31.8 cm), 10" (25.4 cm) (1)
  • 12.9" (32.9 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 15.5" (39.4 cm) (1)
  • 16.203 in;411.6 mm (1)
  • 17.75" (45.1 cm) (1)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2" (5.1 cm) (14)
  • 2.05" (5.2 cm) (1)
  • 2.05" (5.2 cm) (1)
  • 2.06" (5.2 cm) (6)
  • 2.09" (5.3 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.13 (5.4 cm) (1)
  • 2.13" (5.4 cm) (1)
  • 2.16" (5.5 cm) (1)
  • 2.25" (5.7 cm) (5)
  • 2.25" (6 cm) (1)
  • 2.27" (5.8 cm) (1)
  • 2.29" (5.8 cm) (3)
  • 2.3" (5.8 cm) (1)
  • 2.31" (5.9 cm) (1)
  • 2.33" (6 cm) (1)
  • 2.34 to 2.367 (5.9 to 6 cm) (1)
  • 2.344" (6 cm) (1)
  • 2.35" (6 cm) (4)
  • 2.5" (6.4 cm) (1)
  • 2.5" (6.4 cm) (2)
  • 2.6" (6.6 cm) (1)
  • 2.688" (6.8 cm) (1)
  • 2.75" (7 cm) (1)
  • 2.75" (70 cm) (1)
  • 2.84" (7.2 cm) (1)
  • 25.5" (64.8 cm) (1)
  • 3 (7.6 cm)Size_Name9-PocketSub BrandPowerlineWeight14.7 oz (417 g) AD6.027720201103C092644570001000926445700015700027111715Brand NameKlein ToolsDrive Size0.375(1 cm) (1)
  • 3 (7.6 cm)Size_Name12-InchSpecial FeaturesTether RingStyle_Namewith Tether RingWeight1.4 lb (0.6 kg) AD6.027720201102C09264473026900092644730269D502-1627112112Brand NameKlein ToolsHandle ColorYellowHandle FinishPlastic-DippedJaw Capacity4.25 (10.8 cm) (1)
  • 3" (7.6 cm) (9)
  • 3.00 in;76 mm (1)
  • 3.02" (7.7 cm) (1)
  • 3.13" (7.9 cm) (3)
  • 3.14" (8 cm) (1)
  • 3.16" (8 cm) (1)
  • 3.19" (8.1 cm) (1)
  • 3.25 in;84 mm (1)
  • 3.25" (8.3 cm) (1)
  • 3.37" (8.5 cm) (1)
  • 3.5" (8.9 cm) (6)
  • 3.55" (9 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.75" (9.1 cm) (1)
  • 3.75" (9.5 cm) (2)
  • 3.81" (9.7 cm) (3)
  • 3.875 in;98.4 mm (1)
  • 3.90" (9.9 cm) (1)
  • 3/16 in (1)
  • 3-5/16 in;84 mm (1)
  • 4 (10.2 cm)Size_Name0.18 to 0.60" Cable DiameterSpecial FeaturesHot LatchSpringYStyle_NameSafe Load 5000 lbSwing LatchNTypeParallel Jaw GripWeight3.8 lb (1.7 kg) AD6.027720201102C09264447753900092644477539KT460027111712Brand NameKlein ToolsApplicationFirmly Grip Insulated Cables and ConductorsCable Diameter0.3 to 0.8" (7.62 to 20.3 mm)Cable TypeACSRConfigurationSpringHot LatchNJaw Length5 (12.7 cm) (1)
  • 4" (10 cm) (1)
  • 4" (10.2 cm) (1)
  • 4.00" (10.2 cm) (1)
  • 4.12" (10.5 cm) (1)
  • 4.15" (10.5 cm) (1)
  • 4.25 in;108 mm (1)
  • 4.25" (10.8 cm) (3)
  • 4.5" (1.8 cm) (1)
  • 4.5" (11.4 cm) (3)
  • 4.656" (11.8 cm) (2)
  • 4.7" (11.9 cm) (1)
  • 4.7" (11.9 cm) (1)
  • 4.8" (1.9 cm) (1)
  • 4.9" (12.4 cm) (1)
  • 46" (116.8 cm) (1)
  • 5 in;127.0 mm (1)
  • 5" (12.7 cm) (6)
  • 5.1" (13 cm) (1)
  • 5.2" (13.2 cm) (1)
  • 5.25" (13.3 cm) (1)
  • 5.3 in;134.6 mm (1)
  • 5.38" (13.7 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.50" (14 cm) (1)
  • 5.9" (15 cm) (1)
  • 50.5" (128.3 cm) (1)
  • 55.5" (141 cm) (1)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (3)
  • 6.18" (15.7 cm) (1)
  • 6.3" (16 cm) (1)
  • 6.5" (16.5 cm) (1)
  • 6.5" (16.5 cm) (2)
  • 6.50" (16.5 cm) (1)
  • 6.75" (17.2 cm) (1)
  • 6.75" (17.1 cm) (1)
  • 7" (17.8 cm) (1)
  • 7.25 in;184.2 mm (1)
  • 7.25" (18.4 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.55" (19.2 cm) (1)
  • 7.7 (20 cm) (1)
  • 7.7" (19.6 cm) (1)
  • 7.75" (19.7 cm) (1)
  • 7-1/4 in;184.2 mm (1)
  • 8" (20.3 cm) (2)
  • 8.1" (20.6 cm) (1)
  • 8.5" (21.6 cm) (2)
  • 8.625" (21.9 cm) (1)
  • 8.8" (22.4 cm) (2)
  • 8-3/4 in;222.3 mm (1)
  • 9'' (22.9 cm) (2)
  • 9 in;228.6 mm (1)
  • 9" (22.9 cm) (1)
  • 9.8" (24.8 cm) (1)
  • Receiver: 3.90" (9.9 cm); Transmitter: 2.07" (5.3 cm) (1)
  • Show More...

• Length

  

  • 1.625 in;41.3 mm (1)
  • 1000 ft;305 m (1)
  • 12.8 (2)
  • 13 (1)
  • 13.5 in;342.9 mm (1)
  • 14.8 (1)
  • 14.84 (1)
  • 15 (1)
  • 2.5 in;63.5 mm (1)
  • 22 in;558.8 mm (1)
  • 25 ft (Tape);3.5 in;88.9 mm (1)
  • 25 ft (Tape);6.5 in;165.1 mm (1)
  • 41 in;1041 mm (1)
  • 5.5 in;139.7 mm (2)
  • 5.828 in;148 mm (1)
  • 7.02 in;178.3 mm (1)
  • 7.5 in (1)
  • 8-45/64 in;221.1 mm (1)
  • 9-1/2" (241.3 mm) (1)
  • 9-3/32 in;231 mm (2)
  • Show More...

• Number Of Batteries

  

  • 1 (4)
  • 2 (3)
  • Show More...

• Width

  

  • 0.719 in;18.3 mm (3)
  • 1 in;25.4 mm (1)
  • 1.875 in;47.6 mm (1)
  • 2 in;50.8 mm (2)
  • 3 in;76 mm (1)
  • 3.54 in;89.9 mm (1)
  • 3-13/16 in;96.8 mm (2)
  • 3-13/64 in;81.4 mm (1)
  • 4.25 in;108 mm (1)
  • 50.5 in;1282.7 mm (1)
  • 7-1/2" (190.5 mm) (1)
  • Show More...

• Overall Length

  

  • 0.5" to 0.88" (1.3 to 2.2 cm) (1)
  • 0.88" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 1" (2.5 cm) (1)
  • 1" (2.5 cm) (6)
  • 1.2" (3 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.265 in (2)
  • 1.29" (3.3 cm) (1)
  • 1.38" (3.5 cm) (2)
  • 1.469" (3.7 cm) (1)
  • 1.5 (3.8 cm)Package Quantity6Style_Name6-PackWeight1.0 oz (27 g) AD6.027720201103C092644561191000926445611915611927113101Brand NameKlein ToolsDiameter0.578 (1.5 cm) (1)
  • 1.5 in (1)
  • 1.5 in;38.1 mm (3)
  • 1.62" (4.1 cm) (2)
  • 1.8" (4.6 cm) (2)
  • 1.8" (4.6 cm) (1)
  • 1.85" (4.7 cm) (4)
  • 1.96" (5 cm) (1)
  • 10'' (25.4 cm) (2)
  • 10 in;254.0 mm (2)
  • 10" (25.4 cm) (13)
  • 10.063" (25.6 cm) (1)
  • 10.125 (1)
  • 10.25 (1)
  • 10.25" (26 cm) (4)
  • 10.313 (3)
  • 10.39" (26.4 cm) (1)
  • 10.4" (26.4 cm) (1)
  • 10.50" (26.7 cm) (1)
  • 10.75" (27.3 cm) (2)
  • 10.781" (27.4 cm) (1)
  • 10.96" (27.8 cm) (With Transmitter docked in Receiver) (1)
  • 1000' (305 m) (2)
  • 10-1/4 in;260.4 mm (2)
  • 10-15/16 in;277.8 mm (2)
  • 11" (27.9 cm) (2)
  • 11" (27.9 cm) (4)
  • 11.25" (28.6 cm) (2)
  • 11.5" (29.2 cm) (4)
  • 11.75" (29.9 cm) (3)
  • 11.9" (30.3 cm) (1)
  • 12' (3.7 m) (1)
  • 12" (30.5 cm) (4)
  • 12.25 (1)
  • 12.344" (31.4 cm) (1)
  • 12.35 (1)
  • 12.375" (31.4 cm) (1)
  • 12.5" (31.8 cm) (8)
  • 12.6" (32 cm) (3)
  • 12.875" (32.7 cm) (1)
  • 12-1/2 in;317.5 mm (2)
  • 12-1/2 in;318 mm (2)
  • 13.125" (33.3 cm) (1)
  • 13.25" (33.7 cm) (1)
  • 13.438" (34.1 cm) (1)
  • 13.5" (34.3 cm) (4)
  • 14" (35.6 cm); 7" (17.8 cm) (1)
  • 14" (35.6 cm) (3)
  • 14.000000000000000 (1)
  • 14.5" (36.8 cm) (1)
  • 14.6" (37.9 cm) (2)
  • 14.75" (37.5 cm) (2)
  • 15' (4.6 m) (1)
  • 15.25" (38.7 cm) (1)
  • 15.5" (39.4 cm) (2)
  • 16" (40.6 cm) (1)
  • 16-1/4 in;412.8 mm (2)
  • 17.5" (44.5 cm) (3)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 19" (48.3 cm) (2)
  • 2" (5.1 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.13" (5.4 cm) (1)
  • 2.25" (5.7 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2.5" (6.4 cm) (3)
  • 2.57" (6.5 cm) (1)
  • 2.6" (6.6 cm) (1)
  • 2.60" (6.6 cm) (1)
  • 2.73" (6.9 cm) (1)
  • 22" (55.9 cm) (1)
  • 23" (9.1 cm) (1)
  • 24" (61 cm) (1)
  • 24" (61 cm) (2)
  • 3" (8 cm) (1)
  • 3.02" (7.7 cm) (1)
  • 3.07" (8 cm) (1)
  • 3.1" (8.0 cm) (1)
  • 3.359" (8.5 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.438" (8.7 cm) (2)
  • 3.5 (1)
  • 3.5" (8.9 cm) (1)
  • 3.5" (8.9 cm) (7)
  • 3.75" (9.5 cm) (3)
  • 3.8" (9.7 cm) (1)
  • 3.875" (9.8 cm) (1)
  • 3.9" (9.9 cm) (1)
  • 30 (76.2 cm)Size_Name30-Inch, 3/4-Inch HexStyle_NameStraightWeight3.2 lb (1.5 kg) AD6.027720201103C092644324109000926443241093241027112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#2 Square; #2 PhillipsWeight2.4 oz (68 g) AD6.027720201103C092644324116000926443241163241127112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#1 Square; 1/4 (0.6 cm) Slotted (1)
  • 36" (91.4 cm) (1)
  • 36.45" (92.6 cm) (1)
  • 4 (1)
  • 4" (10.2 cm) (4)
  • 4" to 8" (101.6 to 203.2 mm) (1)
  • 4.45" (11.3 cm) (1)
  • 4.5" (11.4 cm) (1)
  • 4.563 (1)
  • 4.57" (11.6 cm) (1)
  • 4.61" (11.7 cm) (1)
  • 4.656 (2)
  • 4.797" (12.2 cm) (1)
  • 4.81" (12.2 cm) (1)
  • 40" (101.6 cm) (1)
  • 41" (104.1 cm) (1)
  • 43"(109.2 cm) (1)
  • 44. 63" (123.4 cm) (1)
  • 44.5" (113 cm) (1)
  • 47" (119.4 cm) (1)
  • 49" (124.5 cm) (1)
  • 5" (12.7 cm) (1)
  • 5.25" (13.3 cm) (2)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (3)
  • 5.5" (14.0 cm) (1)
  • 5.5" (2.2 cm) (1)
  • 5.50" (14 cm) (2)
  • 5.67" (14.4 cm) (1)
  • 5.70" (14.5 cm) (1)
  • 5.75" (14.6 cm) (2)
  • 5.78" (14.7 cm); 8.38" (21.3 cm) (1)
  • 5.82" (14.8 cm) (1)
  • 5.82" (14.8 cm) (1)
  • 5.86" (14.9 cm) (1)
  • 5.98" (15.2 cm) (1)
  • 51"(129.5 cm) (1)
  • 52" (13.2 cm) (1)
  • 5-3/4 in;146.1 mm (2)
  • 54" (137.2 cm) (2)
  • 6" (15.2 cm) (2)
  • 6" (15.2 cm) (4)
  • 6.06" (15.4 cm) (1)
  • 6.125" (15.6 cm) (2)
  • 6.25" (15.9 cm) (1)
  • 6.297 (1)
  • 6.3 (2)
  • 6.3" (16 cm) (2)
  • 6.313 (2)
  • 6.35" (16.1 cm) (1)
  • 6.4" (16.3 cm) (1)
  • 6.406 (1)
  • 6.41" (16.2 cm) (2)
  • 6.45" (16.4 cm) (1)
  • 6.5" (16.5 cm) (6)
  • 6.53" (16.6 cm) (1)
  • 6.6" (16.7 cm) (1)
  • 6.625" (16.8 cm) (1)
  • 6.63 (1)
  • 6.68" (17 cm) (2)
  • 6.75 (6)
  • 6.75 in;171.5 mm (2)
  • 6.75 to 7.3125 (2)
  • 6.75" (17.2 cm) (1)
  • 6.75" (17.2 cm) (3)
  • 6.82" (17.3 cm) (1)
  • 6.94" (17.6 cm) (1)
  • 6-1/4 in;158.8 mm (3)
  • 6-1/8 in;155.6 mm (4)
  • 6-3/4 in;171.5 mm (4)
  • 7" (17.8 cm) (2)
  • 7" (17.8 cm) (7)
  • 7.125" (18.1 cm) (2)
  • 7.17" (18.2 cm) (1)
  • 7.18" (18.2 cm) (1)
  • 7.25 (1)
  • 7.25" (18.4 cm) (2)
  • 7.3" (18.5 cm) (1)
  • 7.313 (2)
  • 7.32" (18.6 cm) (1)
  • 7.344" (18.7 cm) (1)
  • 7.4" (18.8 cm) (1)
  • 7.5 (2)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (3)
  • 7.65" (19.4 cm) (1)
  • 7.75 in;196.9 mm (2)
  • 7.75" (19.7 cm) (1)
  • 7.75" (19.7 cm) (4)
  • 7.76" (19.7 cm) (1)
  • 7.8" (19.8 cm) (1)
  • 7.875" (20 cm) (2)
  • 7.9 in;20.1 mm (1)
  • 7.98" (20.3 cm) (1)
  • 7-1/8 in;181.0 mm (2)
  • 7-3/4 in;196.9 mm (4)
  • 8 in;203 mm (2)
  • 8 in;203.2 mm (4)
  • 8" (20.3 cm) (7)
  • 8.09" (20.6 cm) (1)
  • 8.1" (20.6 cm) (1)
  • 8.125 (1)
  • 8.203" (20.8 cm) (1)
  • 8.25" (21 cm) (2)
  • 8.25" (21.0 cm) (1)
  • 8.31" (21.1 cm); 10.31" (26.2 cm) (1)
  • 8.313" (21.1 cm) (3)
  • 8.344" (21.2 cm) (3)
  • 8.375 (1)
  • 8.39" (21.3 cm) (1)
  • 8.41 (1)
  • 8.41" (21.4 cm) (1)
  • 8.45" (21.5 cm) (4)
  • 8.49" (21.6 cm) (1)
  • 8.5" (21.6 cm) (2)
  • 8.71" (22.1 cm) (1)
  • 8.75" (22.2 cm) (3)
  • 8.94" (22.7 cm) (1)
  • 8.98" (22.8 cm) (1)
  • 8-1/16 in;204.8 mm (3)
  • 8-1/4 in;209.6 mm (2)
  • 8-1/8 in;206.4 mm (3)
  • 8-11/32 in;211.9 mm (3)
  • 8-5/8 in;219.1 mm (2)
  • 8-7/16 in;214.3 mm (2)
  • 8-9/16 in;217.5 mm (2)
  • 9 in (2)
  • 9 in;229 mm (3)
  • 9" (22.9 cm) (7)
  • 9.0" (23 cm) (1)
  • 9.07” (23 cm) (1)
  • 9.09" (23.1 cm) (3)
  • 9.25" (23.5 cm) (3)
  • 9.3" (24 cm) (1)
  • 9.3/8 in;238.1 mm (1)
  • 9.35" (23.7 cm) (4)
  • 9.391 (3)
  • 9.5" (24.1 cm) (2)
  • 9.5" (24.1 cm) (3)
  • 9.54 (1)
  • 9.55" (24.3 cm) (1)
  • 9.6" (24.4 cm) (1)
  • 9.73" (24.7 cm) (1)
  • 9.75 (6)
  • 9.75" (24.8 cm) (3)
  • 9.75" (24.8 cm); 11.31" (28.7 cm) (1)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (6)
  • 9-3/4 in;247.7 mm (4)
  • 9-3/8 in;238.1 mm (2)
  • 9-7/64 in;231.4 mm (2)
  • Show More...

• Application

  

  • #8 AWG Copper, Aluminum and Other Soft Metals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals and Crimps Non-insulated Connectors, Lugs, and Terminals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals, 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • 10 - 20 AWG, 12 - 22 AWG (1)
  • 10 Piece Sae Ball-End Journeyman T-Handle Set With Stand (1)
  • 10-12 Solid and 12-14 Stranded Wire;Noninsulated Connectors;Lugs and Terminals (1)
  • 10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
  • 16 AWG (1)
  • 5/8" (15.9 mm) Pole Line and Hardware Bolts, Threaded Rods (1)
  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • Accurate Targeting and Temperature Measurement (1)
  • ACSR, Screws, Nails, Most Hardened Wire (11)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Pulls 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • All Purpose (2)
  • Alternative 45 Degree Mounting for Flush Cutting (1)
  • Aluminum;Brass;Copper;Plastic and Up to 10 Gauge Metal (1)
  • Ambient and Direct-Contact Temperature Readings (1)
  • Bending Conduit (3)
  • Bolt Applications (13)
  • Burr-Free PVC Cutting (1)
  • Cable Connection (1)
  • Cable Cutting in Confined Spaces (1)
  • Cable Cutting, Stripping, Deburring (1)
  • Cable Stripping (2)
  • Cable Termination (1)
  • Cable Testing (1)
  • Calibrated for Drywall, Masonry, Hardwood, Softwood Only (1)
  • Carbon Monoxide Detector (1)
  • Check for and find the true vertical and horizontal (1)
  • Check for and find the true vertical and horizontal;Transfer angles between surfaces with adjustable vial (1)
  • Class C (3)
  • Class E (5)
  • Coats Better and is 30% More Slippery Than Gel or Wax Lubricants (1)
  • Conduit and Pipe (2)
  • Conduit and Wire Pulling (1)
  • Conduit Bending (1)
  • Construction Sites, Factories, Airport Grounds, Hunting, Distribution Warehouses, Arborist, Racing, Range Instructors (1)
  • Cooling (1)
  • Crimps Noninsulated Connectors, Lugs, and Terminals (1)
  • Crimps Non-Insulated Solderless Terminals and Connectors (1)
  • Crimps UR/UY/UG Insulation Displacement Connectors (IDC)- Scotchlok Type Connectors, Cleanly Strips 23 AWG and 24 AWG Wires (1)
  • Cut and Trim Sheet Metal (1)
  • Cut Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts ACSR, Screws, Nails and Most Hardened Wire (1)
  • Cuts and Crimps Wire 10-22 AWG (1)
  • Cuts and Strips Wires (3)
  • Cuts Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16 in (5 mm) Thick (3)
  • Cuts;Strips and Loops Wires (2)
  • CUTTING (1)
  • Cutting Copper and Aluminum Cable (1)
  • Cutting Holes in Stainless Steel,Mild Steel, Iron, Copper, and Brass (1)
  • Designed For Greater Capacity in Tight Work Spaces (1)
  • Designed for Telecom and Electrical and Heavy-Duty Use (1)
  • Designed to withstand impact drills (10)
  • Designed to Work with Ties Rated at 120 to 250 lbs (1)
  • Detects and Identifies Common Wiring Problems in GFCI Receptacles (1)
  • Detects and Indicates Low Voltage and Standard Voltage; Detects Most Common Wiring Problems in Standard Receptacles (1)
  • Determine Wiring Condition in Outlet (1)
  • Driver (2)
  • Driving Slotted Fasteners (1)
  • Dual-Range Non-contact Detection of the Presence of AC Voltage from 12-1000 VAC or from 70-1000V AC (1)
  • Each Tap Size Rethreads to Next Larger Size If Threads Are Stripped. (2)
  • Easily Cuts 3/8" Flexible Conduit;#10,12,14 Armored Cables with Up to 4 Wires with a Couple of Turns of the Handle (1)
  • Electrical (4)
  • Electrical Metallic Tubing (EMT) (4)
  • Electricians (4)
  • Electrician's Previous Generation Multimeters (1)
  • Electronics (3)
  • Fan, Air Movement (1)
  • Fastening Screws, Nuts and Bolts (1)
  • Fastening; Impact Driving (9)
  • Fastening;Impact Driving (1)
  • Fastening;Impact Driving;Ratcheting Driver for Tight Spaces (1)
  • For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (5)
  • For Cable Cutting in Confined Spaces (1)
  • For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
  • For Skin and Hand Cleansing (1)
  • For Work Near Energized Sources (10)
  • Form New Threads, Re-form Burred Threads or Clean Out Plaster Obstructions (1)
  • General Application Near Energized Source (1)
  • General Construction (1)
  • General Purpose (9)
  • General Purpose;Skinning (1)
  • General Use (1)
  • Hammering (3)
  • Hammering and Demolition (1)
  • Head Light; Work Light Headlamp (3)
  • Heat Retention (4)
  • Heat Retention General Work Gloves (1)
  • Heavy-Duty Line Work (1)
  • Heavy-Duty Pulling (1)
  • High Strength Steel Handle Features a Swaged End for Inserting Conduit to Correct Overbends Bright Orange Color Handle is Easy to Spot on The Jobsite (1)
  • Holds Multimeters and Clamps (1)
  • Hole Making in Wood, Plastic, Mild and Stainless Steel (1)
  • HVAC (6)
  • Illumination (5)
  • Impact Driving and Screwdriving (1)
  • Insulation Resistance Testing (1)
  • Intermediate Risk (2)
  • Job Site (1)
  • Knee Protection (5)
  • Knife Storage (1)
  • Large Cable Stripping (1)
  • Laser Levels (1)
  • Layout Applications Requiring Level and Plumb Checks (1)
  • Light (1)
  • Light Duty Task (1)
  • Linear Measurement (1)
  • Linear Measurment (3)
  • Locate Circuit Breakers in Panel, Test GFCI Devices (1)
  • Long Bolt and Stud Applications (1)
  • Long Bolts, Studs or Threaded Rod (2)
  • Lunch, Food Cooler (2)
  • Magnetic Combination Square and Conduit Layout Template (1)
  • Magnetizing / Demagnetizing Screwdrivers (1)
  • Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly (1)
  • Measures AC Current (4)
  • Measures AC Current and NCVT via Clamp and AC/DC Voltage, Resistance, and Continuity via Test-leads, and Temperature with Thermocouple (1)
  • Measures AC Current and NCVT via Clamp and AC/DC Voltage, Resistance, and Continuity via Test-Leads (1)
  • Measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamp, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple (1)
  • Measures AC Current, AC/DC Voltage, Continuity, Resistance (1)
  • Measures AC/DC Current, AC/DC Voltage, continuity, resistance, DC microamp Current, Capacitance, Frequency, Duty Cycle, Temperature, and Tests Diodes. Detects Presence of AC Voltages with Integrated Non-Contact Voltage Tester (1)
  • Measures AC/DC Voltage (2)
  • Measures Angles;Use as a Digital Level (1)
  • Measures both AC/DC current and NCVT via the clamp and AC/DC voltage, DC microamp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads, and temperature with thermocouple (1)
  • Measures Current (1)
  • Measures Current to 2000A AC/DC (1)
  • Measures Illuminance Levels in Foot Candles (FC) and Lux (1)
  • Measures Length (2)
  • Multi Purpose (2)
  • Multi Purpose Utility (2)
  • Multi-Material Drilling (4)
  • Multi-Purpose Cutting (1)
  • NM Cable Multi-Tool (1)
  • Non Ferrous Wire and Soft Metal Cutting (1)
  • Non-Contact Detection and Testing of AC Voltage (2)
  • Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter (1)
  • Non-Contact Detection and Testing of AC Voltage; Not Recommended for Tamper-resistant Outlets (1)
  • Non-Contact Detection of Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires (1)
  • Nut Driving (1)
  • Nut Driving on Unlimited Bolt Lengths (4)
  • Penetration Cuts and Hole Making (1)
  • Phone Storage (6)
  • Pick-up Tool (1)
  • Piercing;Slicing (1)
  • Pole Hardware Installation and Removal (1)
  • Pole;Tree Climber (1)
  • Power for Job Site Power Box (1)
  • Precision Electronics (1)
  • Precision Wire Cutting (1)
  • Precision, Electronics (2)
  • Provides Non-Contact Detection of AC Voltage;Doorbells;Thermostats;Low Voltage Lighting;Irrigation Systems (1)
  • Prying and Chiseling (1)
  • PVC/Plastic Tube Cutting (1)
  • Ratcheting Driver for Tight Spaces (1)
  • Ratcheting Driving (1)
  • Reinforced Thumb and Finger Panels (1)
  • Repair and Restore Fiberglass Fish Tapes (1)
  • Replaceable Hook-Jaw Blades Grab and Hold Cable While Shear-Cutting Action Makes Clean Cuts;Not Designed for Cutting Steel or ACSR (1)
  • Replacement Bit (1)
  • Replacement Blades (1)
  • Replacement for 626 and 627-20 (1)
  • Replacement Part for 4-in-1 Electronics Screwdriver (Cat. No. 32581) (1)
  • Reversible Thumb Stud Provides Easy One-Handed Opening (1)
  • RT310 is an electrical outlet tester that tests for wiring faults in electrical outlets, and Tests AFCI and GFCI Devices (1)
  • Scotchlok UG, UR and UY connectors (1)
  • Screwdriver / Nut Driver (1)
  • Securing VDV and Romex Cable (1)
  • Security;Entertainment;Communications;Environmental Control;Irrigation Systems (1)
  • Self-Leveling Laser Alignment Instrument (1)
  • Sharpen Knife and Scissors (1)
  • Side Cutting (1)
  • Side Cutting; Stripping (1)
  • Side Cutting; Stripping; Crimping (1)
  • Skinning Small Wire and Cable, General Use (1)
  • Small Part Accessibility and Storage (1)
  • Soft Metal Tube Cutting (1)
  • Specifically Designed for Locking Out Power Sources such as Disconnects, Switches, and Panel Boxes (1)
  • Splinter Guard Allows you to Work Pain-Free and Glove-Free;Maintain Complete Dexterity Whether Installing Wires above Ceilings, in Attics, Through Walls, in Crawl Spaces, Under Carpets or Raised Floors (1)
  • Stacked Circuit Boards, Long Bolt Applications (1)
  • Storage (2)
  • Strip (10-14 SLD)(12-16 STR), Bolt Shear #6-32 and #8-32, Crimps Non-Insulated Connectors, Lugs and Terminals, Cuts Screws, Nails and Most Hardened Wire (2)
  • Stripping Six Standard Wire Size without Nicking Wires (1)
  • Strips 12 AWG Wires (2)
  • Stub UPS;Offsets;Back-To-Back Saddle Bends and Other Bends (1)
  • Tamperproof and Security Bit Driving (1)
  • Tapered Nose Design for Working in Confined Spaces (1)
  • Temperature Measurement via IR (Infrared) and Probe (1)
  • Temperature Measurements Using IR Emission or K-Type Probe (1)
  • Test AC/DC Voltage From 12-600V (1)
  • Testing and Measuring Voltage (5)
  • The 17 In(432 mm) Case Diameter Means You Can Reel In 10% More Tape In A Single Revolution Vs. A 16 In(406 mm) Case. (1)
  • The Lightweight and Strong Fiberglass Composite Tape Resists Harsh Elements and is Strength Rated up to 500 Pulling Pounds. (1)
  • Three 3/16 In (5 mm) Diameter X 5 In (1.52 M) Glow Rods Assemble to A Full 15 In (4.57 M). (1)
  • Tight Wrench-Over-Wrench Applications (3)
  • Tighten and Loosen Locknuts (1)
  • Tightening (2)
  • To Perform Variety of Piercing and Punching Jobs (1)
  • Tool Carrying (13)
  • Tool Storage (5)
  • Tool Storage and Organization (1)
  • Tools, Meters, Small Parts and Tech Devices (2)
  • Tough Applications (1)
  • Trace Energized and Non-Energized Breakers, Fuses, and Wires (1)
  • Transporting Goods (1)
  • Turning Fasteners (3)
  • Use with Klein Tools Tradesman Pro™ Pouches (3)
  • Use with Power Impact Drivers (1)
  • Utility (1)
  • View Hot and Cold Spots For Instant Troubleshooting (3)
  • Wet; Dry; Oily Conditions (8)
  • Wire Crimping, Stripping and Cutting (1)
  • Wire Cutting (3)
  • Wire Cutting;Stripping (1)
  • Wire Cutting;Stripping and Twisting Plus Bolt Shearing (1)
  • Wire Pulling (8)
  • Wire Stripping and Cutting (9)
  • Wire Stripping, Cutting and Crimping (2)
  • Wiring Pulling (1)
  • Work Near Energized Sources (1)
  • Work on Up To 9/16" (1.4 cm) O.D. Wire (1)
  • Working on Stacked Circuit Boards or Other Long Bolt Applications (1)
  • Show More...

• Height

  

  • 1 in;25.4 mm (2)
  • 1.156 in;29.4 mm (1)
  • 1.625 in;41.3 mm (1)
  • 1-35/64 in;39.3 mm (2)
  • 1-39/64 in;40.9 mm (1)
  • 16-1/4" (412.8 mm) (1)
  • 2.10 in;53.3 mm (1)
  • 2.875 in;73 mm (1)
  • 6.5 in;165.1 mm (1)
  • 7" (178mm), 5.5" (140mm) (1)
  • 9-1/2" (241.3 mm) (1)
  • Show More...

• Drive Size

  

  • 1/2" (1)
  • 1/4 in;5/16 in (3)
  • 1/4 in;5/16 in;3/8 in (2)
  • 1/4 in;5/16 in;3/8 in;7/16 in;1/2 in;9/16 in Hex Nut Drivers (1)
  • 1/4" (7)
  • 1/4" Dual-Drive (1)
  • 1/4" Hex, 1/2" Square (1)
  • 1/4” and 5/16” (2)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16 in;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (630 Nut Drivers) (1)
  • 3/8" (1)
  • 5/16 in (1)
  • 5/16 in;1/4 in (2)
  • 5/64 in (2 mm);3/32 in (2 mm);7/64 in (3 mm);1/8 in (3 mm);9/64 in (4 mm);5/32 in (4 mm);3/16 in(5 mm);7/32 in (6 mm) and 1/4 in (6 mm) (1)
  • Multi (1)
  • Show More...

• Jaw Length

  

  • 0.45" (1.1 cm) (1)
  • 0.696" (1.8 cm) (2)
  • 0.781" (2 cm) (1)
  • 0.813 (2.1 cm)Jaw Thickness0.813 (2.1 cm) (1)
  • 0.813 in;20.7 mm (1)
  • 0.83" (2.1 cm) (1)
  • 1" (2.5 cm) (2)
  • 1.085" (2.8 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.594 in;40.5 mm (1)
  • 1.594" (4 cm) (1)
  • 1.625" (4.1 cm) (1)
  • 1.91" (4.9 cm) (4)
  • 1.969" (5 cm) (1)
  • 1-19/32 in;40.5 mm (7)
  • 1-19/32 in;41 mm (2)
  • 13/16 in;20.6 mm (7)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2.04" (0 cm) (1)
  • 2.313 in;58.8 mm (1)
  • 2.32" (5.9 cm) (1)
  • 2.43" (6.2 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2-3/16 in;55.6 mm (2)
  • 2-5/16 in;58.7 mm (4)
  • Show More...

• Conduit Size

  

  • 1" (1)
  • 1/2 in (12.7 mm) Rigid/IMC;3/4 in (19.1 mm) Thinwall/EMT (1)
  • 1/2 in;12.7 mm;3/4 in;19.1 mm;1 in;25.4 mm (3)
  • 1/2" (1)
  • 3/4 in;19 mm Rigid/IMC;1 in EMT (1)
  • 3/4" (1)
  • Show More...

• Jaw Width

  

  • 0.26" (0.7 cm) (1)
  • 0.375" (1 cm) (1)
  • 0.5 in;12.7 mm (1)
  • 0.5" (1.3 cm) (2)
  • 0.688" (1.7 cm) (4)
  • 0.75" (1.9 cm) (1)
  • 0.938" (2.4 cm) (1)
  • 0.969" (2.5 cm) (1)
  • 1 in;25.4 mm (7)
  • 1.02" (2.6 cm) (1)
  • 1.154" (0 cm) (1)
  • 1.188 (3 cm)Joint TypeHot RivetedMaterialSteelOverall Length8.063 (20.5 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25 in;31.8 mm (2)
  • 1.25" (3.2 cm) (7)
  • 1.26" (3.2 cm) (1)
  • 1.29" (3.3 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1-1/14 in;32 mm (2)
  • 1-1/4 in;31.8 mm (7)
  • 1-3/16 in;30.2 mm (7)
  • Show More...

• Shank Length

  

  • 1" to 2.75" (2.5 to 7 cm) (1)
  • 1" to 4" (2.5 to 10.1 cm) (2)
  • 1.266" (3.2 cm) (1)
  • 1.297" (3.3 cm) (2)
  • 1.5" (3.8 cm) (3)
  • 10 (25.4 cm)Shank TypeRoundSize_Name3/8 inch Tip, 10 inch ShankSub BrandCushion-GripTip Size3/8 (9.5 mm) (1)
  • 1-17/64 in;32.1 mm (1)
  • 12 in;304.8 mm (1)
  • 2 to 4 (5.1 to 10.2 cm) (1)
  • 2" (5.1 cm) (1)
  • 2.5 in;63.5 mm (1)
  • 2.797 in;71 mm (1)
  • 2.797" (7.1 cm) (1)
  • 2.95 in;75 mm (1)
  • 2.953 in;75 mm (1)
  • 3 (7.6 cm)Shank TypeRoundSize_Name5-InchStyle_NamePhillipsTip Size1/2 (12.7 mm) (1)
  • 3 in;76.2 mm (3)
  • 3" (7.6 cm) (2)
  • 3" (7.6 cm) (4)
  • 3" (7.6 cm); 4" (10.2 cm) (1)
  • 3.1 (7.9 cm)Special FeaturesIncreased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs)StandardN.I.S.T. Traceable Calibration Certificate; ASME B107.300-2010TypeTorque Screwdriver SetWeight1.0 lb (0.5 kg) AD6.027720201103C092644551635000926445516355704L24112403Brand NameKlein ToolsBelt Width2 (5.1 cm) (1)
  • 3.1" (7.9 cm) (2)
  • 3.25" (8.3 cm) (1)
  • 3.38" (8.6 cm) (1)
  • 3.5" (8.9 cm) (3)
  • 3.6" (9.2 cm) (1)
  • 3.625" (9.2 cm) (1)
  • 3.625;4.313 (1)
  • 3.63" (9.2 cm) (1)
  • 4 (1)
  • 4 in;101.6 mm (11)
  • 4 to 8 in;101.6 to 203.2 mm (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (13)
  • 4" (10.2 cm), 6" (15.2 cm) (1)
  • 4" (10.2 cm); 6" (15.2 cm) (1)
  • 4-7/64 in;104.4 mm (1)
  • 6 (15.2 cm)Shank TypeRoundSpecial FeaturesSlim Profile TipStandardASTM F-1505-16, IEC 60900:2018Tip Size3/16 (0.5 cm) (1)
  • 6 in;152.4 mm (5)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (5)
  • 6" (15.2 cm); 7" (17.8 cm) (1)
  • 6.35" (16 cm) (1)
  • 7 in;177.8 mm (3)
  • 7" (17.8 cm) (4)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (5)
  • 9-7/64 in;231.4 mm (1)
  • Double-End: 3.5" (8.9 cm); Single-End: 5.75" (14.6 cm) (1)
  • Long 2.09" (5.3 cm), Short 0.34" (0.9 cm) (1)
  • Standard: 2" (5.1 cm); Extended: 4" (10.2 cm) (1)
  • Show More...

• Includes

  

  • (1) 5/16-Inch Cabinet-Tip;(1) #2 Phillips-Tip Screwdriver (1)
  • (2) Alkaline 1.5V AAA Battery (1)
  • (2) Screwdrivers (1)
  • (3) 5' (1.5 m) Glow Rods with Bullet Nose and Hook Attachments (2)
  • (3) 5/32 in (3.96 mm) diameter 6 in (1.8 m) glow rods with bullet nose and hook attachments (1)
  • (4) Bags (1)
  • (5) 4' (1.2 m) Lo-Flex Fish Rods, (1) 5' (1.3 m) Mid-Flex Glow Rod with Bullet Nose and Hook Attachments (1)
  • (5) Mil Back Plate (1)
  • 2 x AAA (1)
  • 600-4;602-6;601-3;601-6;605-4;603-3;603-4 (1)
  • 604-3, 606-2, 607-3 and 608-3 (1)
  • AUX Cable;USB Charging Cable (1)
  • Bright LED Flashlight (1)
  • Fan, USB-C Charging Cord, Instruction Manual (1)
  • Handle 51427 (2)
  • Handle 51429 (1)
  • Hard Carrying Case (1)
  • Pouch;Test leads with CAT III/CAT IV;Safety Caps;Thermocouple with Adapter (Temperature-Measuring Models Only);Battery (3)
  • Screw-On Alligator Clip;Pair of Universal Test Leads (1)
  • Six Different Size Knockout Punches and Dies, Two Draw Studs and Ratcheting Box End Wrench (1)
  • Swivel Snap Hook, Web Strap (1)
  • T-Handle Set with Stand, SAE, 6'' Blades (2)
  • T-Handle Set with Stand, SAE, 9'' Blades (1)
  • Tripod, Carrying Bag (1)
  • Show More...

• Weight

  

  • 0.02 oz (0.45 g) (1)
  • 0.1 lb;0.05 kg (1)
  • 0.10 lb (0.05 kg) (3)
  • 0.10 oz (2.8 g) (5)
  • 0.14 lb (1)
  • 0.15 (1)
  • 0.15 lb;0.07 kg (3)
  • 0.16 oz (4.5 g) (4)
  • 0.18 lb (0.08 kg) (1)
  • 0.19 lb;0.09 kg (1)
  • 0.2 oz (91 g) (1)
  • 0.20 lb;0.09 kg (4)
  • 0.25 lb;0.11 kg (6)
  • 0.26 lb;0.12 kg (2)
  • 0.27 lb;0.12 kg (3)
  • 0.28 lb (2)
  • 0.3 oz (8 g) (2)
  • 0.30 lb;0.14 kg (4)
  • 0.3125 (1)
  • 0.32 oz (9.1 g) (1)
  • 0.34 lb;0.15 kg (3)
  • 0.35 lb;0.16 kg (2)
  • 0.38 lb (1)
  • 0.4 lb (0.2 kg) (1)
  • 0.4 lb (0.2) kg (1)
  • 0.40 lb;0.18 kg (1)
  • 0.40 oz (11.0 g) (2)
  • 0.41lb;0.19 kg (2)
  • 0.48 lb;0.22 kg (3)
  • 0.50 lb (0.23 kg) (1)
  • 0.50 lb;0.23 kg (3)
  • 0.50 oz (14.2 g) (5)
  • 0.59 oz (16.7 g) (1)
  • 0.60 lb;0.27 kg (2)
  • 0.61 (1)
  • 0.63 lb;0.29 kg (4)
  • 0.64 lb;0.29 kg (2)
  • 0.77 lb (1)
  • 0.8 oz (23 g) (3)
  • 0.80 lb (2)
  • 0.80 lb;0.36 kg (2)
  • 0.80 oz (22.7 g) (3)
  • 0.81 lb;0.37 kg (2)
  • 0.9 oz (26 g) (2)
  • 0.9812 (1)
  • 1 (1)
  • 1 lb (0.45 kg) (1)
  • 1 oz (31 g) (1)
  • 1.0 lb (0.5 kg) (8)
  • 1.08 lbs (0.5kg) (1)
  • 1.09 lb (0.5 kg) (1)
  • 1.1 lb (0.5 kg) (11)
  • 1.1 lb;0.5 kg (9)
  • 1.1 oz (31 g) (2)
  • 1.1 oz (31 g) to 2.24 oz (64 g) (1)
  • 1.1 oz;31 g (2)
  • 1.10 oz (31.0 g) (1)
  • 1.13 lb (1)
  • 1.2 lb (0.5 kg) (8)
  • 1.2 lb (0.6 kg) (1)
  • 1.2 lb;0.5 kg (1)
  • 1.2 oz (34 g) (2)
  • 1.20 oz (34 g); 3.7 oz (105 g) (1)
  • 1.3 lb (0.6 kg) (6)
  • 1.3 lb;0.6 kg (1)
  • 1.4 lb (0.6 kg) (2)
  • 1.4 oz (40 g) (2)
  • 1.40 oz (39.0 g) (1)
  • 1.45 lb (1)
  • 1.5 lb;0.68 kg (2)
  • 1.5 lb;0.7 kg (5)
  • 1.5 oz (43 g) (2)
  • 1.5 oz;43 g (2)
  • 1.59 lb (0.72 kg) (1)
  • 1.6 lb (0.7 kg) (2)
  • 1.6 lb (0.8 kg) (1)
  • 1.6 oz (45 g) (11)
  • 1.6 oz;45 g (8)
  • 1.7 (1)
  • 1.7 lb (0.77 kg) (1)
  • 1.7 lb (0.8 kg) (3)
  • 1.7 oz (48.1 g) (1)
  • 1.76 oz (50 g) (1)
  • 1.8 (1)
  • 1.8 lb (0.8 kg) (1)
  • 1.8 oz (51 g) (1)
  • 1.8 oz (52.0 g) (1)
  • 1.9 lb (0.8 kg) (2)
  • 1.9 lb (0.9 kg) (1)
  • 1.9 oz (51.0 g) (1)
  • 1.9 oz (54 g) (2)
  • 1.9125 lb (0.87kg) (1)
  • 10 oz;283 g (1)
  • 10.1 oz (286 g) (4)
  • 10.2 oz (290 g) (2)
  • 10.4 oz (295 g) (3)
  • 10.56 oz (299 g) (1)
  • 10.6 (1)
  • 10.6 oz (299 g) (1)
  • 10.8 oz (306 g) (1)
  • 10.9 oz (308 g) (1)
  • 11 oz (314 g) (4)
  • 11.2 oz (318 g) (3)
  • 11.8 lb (5.4 kg) (1)
  • 11.8 oz (335 g) (1)
  • 12 oz (340 g) (1)
  • 12.2 oz (345 g) (1)
  • 13.00 oz (380.0 g) (1)
  • 13.2 lb (6.0 kg) (1)
  • 13.28 oz (377 g) (1)
  • 13.4 oz (381 g) (1)
  • 13.6 oz (386 g) (1)
  • 13.6 oz;386 g (2)
  • 13.8 oz (390 g) (1)
  • 13.9 oz (395 g) (1)
  • 14.4 oz ( 408 g) (1)
  • 14.4 oz (408 g) (4)
  • 14.6 oz;414 g (1)
  • 14.7 (1)
  • 14.7 oz (417 g) (2)
  • 14.8 oz (420 g) (1)
  • 15 oz (426 g) (1)
  • 15.45 oz (438 g) (1)
  • 15.6 oz (442 g) (1)
  • 16.9 lb (7.7 kg) (1)
  • 17.6 oz (499 g) (1)
  • 17.9 oz (508 g) (1)
  • 19.0 lb (8.6 kg) (1)
  • 2 lb (1)
  • 2 lb (1 kg) (1)
  • 2.0 lb (0.9 kg) (1)
  • 2.0 lb (0.91 kg) (1)
  • 2.00 oz (57.00 g) (1)
  • 2.1 oz (59 g) (1)
  • 2.2 lb (1.0 kg) (1)
  • 2.24 oz (64 g) (1)
  • 2.3 oz (65 g) (1)
  • 2.32 oz (66 g) (1)
  • 2.4 oz (68 g) (2)
  • 2.4 oz;68 g (2)
  • 2.5 lb (1.1 kg) (1)
  • 2.5 oz (71 g) (1)
  • 2.5 oz (72 g) (1)
  • 2.5 oz;71 g (2)
  • 2.6 lb (1.2 kg) (1)
  • 2.6 oz (73 g) (3)
  • 2.6 oz (75 g) (1)
  • 2.7 lb (1.2 kg) (1)
  • 2.7 oz (77 g) (4)
  • 2.8 lb (1.3 kg) (1)
  • 2.9 lb (1.3 kg) (1)
  • 2.9 oz (82 g) (1)
  • 20.7 (1)
  • 20.8 (1)
  • 20.8 oz (590 g) (1)
  • 24.7 (1)
  • 3 oz (86 g) (2)
  • 3.2 oz (90 kg) (1)
  • 3.2 oz (91 g) (22)
  • 3.2 oz;91 g (2)
  • 3.20 oz (92.00 g) (1)
  • 3.3 lb (1.5 kg) (1)
  • 3.3 oz (94 g) (1)
  • 3.31 lb (1.5 kg) (1)
  • 3.4 lb (1.5 kg) (4)
  • 3.46 lb (1.6 kg) (1)
  • 3.5 lb (1.6 kg) (1)
  • 3.5 oz (99 g) (1)
  • 3.60 oz (106.5 g) (1)
  • 3.7 oz (104 g) (1)
  • 3.7 oz;104 g (2)
  • 3.8 oz (108 g) (1)
  • 3.8 oz (109 g) (2)
  • 4 oz (113 g) (16)
  • 4 oz (113.4 g) (1)
  • 4.0 lb (1.8 kg) (1)
  • 4.0 oz (113 g) (4)
  • 4.2 lb (1.9 kg) (1)
  • 4.2 oz (118 g) (2)
  • 4.3 lb (2.0 kg) (2)
  • 4.3 oz (122 g) (1)
  • 4.5 lb (2.0 kg) (2)
  • 4.6 lb (2.1 kg) (1)
  • 4.6 oz (132 g) (3)
  • 4.8 oz (136 g) (20)
  • 5 oz (141.7 g) (1)
  • 5.0 lb (2.3 kg) (1)
  • 5.1 oz (145 g) (3)
  • 5.10 oz (144.2 g) (1)
  • 5.12 oz (145 g) (1)
  • 5.2 oz (147.4 g) (1)
  • 5.3 oz (150 g) (2)
  • 5.3 oz (151 g) (1)
  • 5.4 lb (2.5 kg) (1)
  • 5.4 oz (154 g) (4)
  • 5.5 lb (2.5 kg) (1)
  • 5.50 oz (156.0 g) (1)
  • 5.6 oz (159 g) (7)
  • 5.9 oz (167 g) (1)
  • 5.90 oz (167.0 g) (1)
  • 6 lb (2.7 kg) (1)
  • 6.0 lb (2.7 kg) (1)
  • 6.00 oz (170.0 g) (1)
  • 6.1 lb (2.8 kg) (1)
  • 6.1 oz (172 g) (1)
  • 6.2 lb (1)
  • 6.2 oz (176 g) (1)
  • 6.2 oz (177 g) (3)
  • 6.3 lb (2.8 kg) (1)
  • 6.4 oz (181 g) (4)
  • 6.40 oz (180.0g) (1)
  • 6.6 lb (3.0 kg) (1)
  • 6.6 oz (186 g) (2)
  • 6.6 oz;187 g (1)
  • 6.8 lb (3.1 kg) (1)
  • 6.83 lb (3.1 lb) (1)
  • 6.9 oz (195 g) (1)
  • 7 oz (200 g) (3)
  • 7.0 lb (3.2 kg) (1)
  • 7.0 oz (187 g) (2)
  • 7.04 oz (200 g) (1)
  • 7.2 oz (204 g) (3)
  • 7.2 oz (204.1 g) (1)
  • 7.2 oz. (204 g) (1)
  • 7.40 oz (210.0 g) (1)
  • 7.5 oz (213 g) (1)
  • 7.52 oz (213 g) (1)
  • 7.6 oz (215 g) (1)
  • 7.8 oz (211 g) (1)
  • 7.9 lb (3.6 kg) (2)
  • 8 oz (227 g) (6)
  • 8.0 lb (3.6 kg) (2)
  • 8.2 oz (231 g) (1)
  • 8.3 oz (236 g) (1)
  • 8.4 oz (237 g) (1)
  • 8.5 oz (241 g) (3)
  • 8.6 oz (245 g) (2)
  • 8.64 oz (245 g) (1)
  • 8.8 oz (249 g) (4)
  • 8.8 oz (250 g) (1)
  • 8.9 lb (4.0 kg) (1)
  • 9 oz (254 g) (1)
  • 9.1 oz (258 g) (1)
  • 9.3 oz (264 g) (1)
  • 9.6 lb (4.3 kg) (1)
  • 9.6 oz (272 g) (3)
  • 9.6 oz;272 g (7)
  • 9.8 oz (277 g) (1)
  • 9.8 oz;278 g (2)
  • 9.9 oz (281 g) (1)
  • Show More...

• Overall Height

  

  • — (1)
  • .25" (0.6 cm) (1)
  • 0.172" (0.4 cm) (1)
  • 0.18" (0.5 cm) (1)
  • 0.19" (0.5 cm) (1)
  • 0.25'' (0.6 cm) (1)
  • 0.25" (0.6 cm) (2)
  • 0.3" (0.8 cm) (3)
  • 0.342 to 0.99 (0.9 to 2.5 cm) (1)
  • 0.375 (1 cm)Overall Length4.5 (11.4 cm) (1)
  • 0.4" (1 cm) (1)
  • 0.406" (1.0 cm) (1)
  • 0.5" (0.6 cm) (1)
  • 0.5" (1.3 cm) (2)
  • 0.50" (1.3 cm) (2)
  • 0.515" (1.3 cm) (1)
  • 0.53" (1.4 cm) (1)
  • 0.55" (1.4 cm) (1)
  • 0.6" (1.5 cm) (1)
  • 0.61" (1.5 cm) (1)
  • 0.65" (1.7 cm) (2)
  • 0.69" (1.8 cm) (1)
  • 0.703" (1.8 cm) (1)
  • 0.71" (1.8 cm) (1)
  • 0.72" (1.8 cm) (1)
  • 0.73" (1.9 cm) (1)
  • 0.75" (1.9 cm) (13)
  • 0.75" (2 cm) (3)
  • 0.77" (2 cm) (1)
  • 0.781" (2 cm) (1)
  • 0.79 (2 cm)Overall Length4.33 (11 cm) (1)
  • 0.79" (2 cm) (1)
  • 0.8" (2 cm) (2)
  • 0.82" (2 cm) (1)
  • 0.84" (2.1 cm); 1.25" (3.2 cm) (1)
  • 0.85" (2.2 cm) (1)
  • 0.86" (2.2 cm) (1)
  • 0.88" (2.2 cm) (1)
  • 0.9" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 0.93" (2.4 cm) (1)
  • 0.94" (2.4 cm) (1)
  • 0.95" (2.4 cm) (1)
  • 1" (2.5 cm) (2)
  • 1" (2.5 cm) (8)
  • 1" (2.54 cm) (1)
  • 1.0" (2.5 cm) (1)
  • 1.00" (2.5 cm) (2)
  • 1.06" (2.7 cm) (1)
  • 1.07" (2.7 cm) (1)
  • 1.09" (2.8 cm) (1)
  • 1.1" ( 2.8 cm) (1)
  • 1.1" (2.8 cm) (1)
  • 1.14" (2.9 cm) (1)
  • 1.16" (2.9 cm) (1)
  • 1.16" (2.9 cm) (2)
  • 1.19" (3 cm) (2)
  • 1.2" (3 cm) (3)
  • 1.24" (3.2 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.25" (3.2 cm) (5)
  • 1.3" (3.3 cm) (1)
  • 1.32" (3.4 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.38" (3.5 cm) (1)
  • 1.391" (3.5 cm) (1)
  • 1.4" (3.6 cm) (1)
  • 1.41" (3.6 cm) (1)
  • 1.42" (3.6 cm) (5)
  • 1.44" (3.7 cm) (1)
  • 1.45" (3.7 cm) (2)
  • 1.5 (3.8 cm)Overall Length13 (33 cm) (1)
  • 1.5" (3.8 cm) (2)
  • 1.5" (3.8 cm) (7)
  • 1.52" (3.9 cm) (1)
  • 1.55" (3.9 cm) (3)
  • 1.57" (4.0 cm) (2)
  • 1.594" (4.1 cm) (1)
  • 1.6" (4.1 cm) (3)
  • 1.61" (4.1 cm) (1)
  • 1.625" (4.1 cm) (1)
  • 1.64" (4.2 cm) (1)
  • 1.7" (4.3 cm) (1)
  • 1.70" (4.3 cm) (1)
  • 1.75 (4.5 cm)Overall Length13 (33 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1.75" (4.4 cm) (2)
  • 1.75" (4.5 cm) (3)
  • 1.78" (4.5 cm) (2)
  • 1.8" (4.6 cm) (1)
  • 1.83" (4.6 cm) (1)
  • 1.84" (4.7 cm) (1)
  • 1.88" (4.7 cm) (1)
  • 1.9" (4.8 cm) (1)
  • 10" (25.4 cm) (1)
  • 10" (25.4 cm) (4)
  • 10.25" (26 cm) (1)
  • 10.52" (26.7 cm) (1)
  • 12 (30.5 cm)Overall Length11 (27.9 cm) (1)
  • 12" (30.5 cm) (2)
  • 12" (30.5 cm) (2)
  • 12.25" (31.1 cm) (2)
  • 12.25" (31.12 cm) (1)
  • 12.75" (32.4 cm) (1)
  • 13" (33 cm) (1)
  • 13" (33 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 13.75" (34.9 cm) (1)
  • 14" (35.6 cm) (2)
  • 14.5" (36.8 cm) (1)
  • 15" (38.1 cm) (1)
  • 16" (40.6 cm) (2)
  • 16.21" (41.2 cm) (4)
  • 16.25" (41.3 cm) (1)
  • 16.5" (41.9 cm) (1)
  • 17" (43.2 cm) (2)
  • 18.5" (47 cm) (1)
  • 19.25" (48.9 cm) (1)
  • 19.5" (49.5 cm) (1)
  • 19.5" (50 cm) (1)
  • 2 (5.1 cm)Overall Length9.188 (23.3 cm) (1)
  • 2" (5 cm) (1)
  • 2" (5.1 cm) (8)
  • 2.07" (5.3 cm) (1)
  • 2.08" (5.3 cm) (1)
  • 2.09" (5.3 cm) (1)
  • 2.16" (5.5 cm) (With Transmitter docked in Receiver) (1)
  • 2.188 in;55.6 mm (2)
  • 2.2" (5.6 cm) (1)
  • 2.25" (5.7 cm) (5)
  • 2.48" (6.3 cm) (1)
  • 2.5" (6.4 cm) (1)
  • 2.52 in;64 mm (1)
  • 2.56" (6.5 cm) (1)
  • 2.594" (6.6 cm) (1)
  • 2.625" (6.7 cm) (1)
  • 2.688" (6.8 cm) (1)
  • 2.75" (7 cm) (1)
  • 2.755" (70 cm) (1)
  • 2.797 (7.1 cm)Overall Length4.328 (11 cm) (1)
  • 2.8" (7.1 cm) (1)
  • 2.8" to 3.4" (7.1 to 8.6 cm) (1)
  • 2.88" (7.3 cm) (2)
  • 20" (50.8 cm) (4)
  • 25.5" (64.7 cm) (1)
  • 3" (7.6 cm) (2)
  • 3.01" (7.5 cm) (1)
  • 3.03" (7.7 cm) (1)
  • 3.047" (7.7 cm) (1)
  • 3.08" (7.8 cm) (1)
  • 3.1" (8.0 cm) (1)
  • 3.2" (8.1 cm) (2)
  • 3.313" (8.4 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.45" (8.8 cm) (1)
  • 3.5 in;88.9 mm (1)
  • 3.5" (1.4 cm) (1)
  • 3.563" (9.1 cm) (1)
  • 3.6" (9.4 cm) (1)
  • 3.78" (9.6 cm) (1)
  • 39" (100 cm) (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (2)
  • 4.48" (11.4 cm) (1)
  • 4.49" (11.4 cm) (1)
  • 4.5" (1.8 cm) (1)
  • 4.5" (11.4 cm) (2)
  • 4.53" (11.5 cm) (1)
  • 4.7" (11.9 cm) (2)
  • 4.75" (12 cm) (1)
  • 4.9" (12.3 cm) (1)
  • 4.9" (12.4 cm) (1)
  • 43.1" (109.5 cm) (1)
  • 44.1" (112 cm) (1)
  • 5" (12.7 cm) (1)
  • 5.4" (13.7 cm) (1)
  • 5.75" (14.6 cm) (1)
  • 52.1" (132.3 cm) (1)
  • 6" (14.9 cm) (1)
  • 6" (15.2 cm) (3)
  • 6.5" (16.5 cm) (11)
  • 6.5" (16.5 cm); 7.5" (19.1 cm) (1)
  • 6.75" (17.2 cm) (2)
  • 7" (17.8 cm) (6)
  • 7" (17.8 cm), 5.5" (14 cm) (2)
  • 7.03" (17.9 cm) (1)
  • 7.13" (18.3 cm) (1)
  • 7.25" (18.4 cm) (2)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (1)
  • 8.32" (21.1 cm) (1)
  • 8.32" (21.1 cm); 10.32" (26.2 cm) (1)
  • 8.5" (21.6 cm) (1)
  • 8.7" (22.1 cm) (1)
  • 8.81" (22.4 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.75" (24.8 cm) (2)
  • 9.875" (25.1 cm) (1)
  • Open 1.5" (3.8 cm); Closed 1.906" (4.8 cm) (1)
  • Receiver: 1.84" (4.5 cm); Transmitter: 1.51" (3.9 cm) (1)
  • Show More...

• Shank Type

  

  • 1/4" Hex (19)
  • 3/8" Hex (2)
  • Hex Arbor (1)
  • Round (44)
  • Round Rapi-Driv(R) (1)
  • Round Rapi-Driv® (2)
  • Slotted (2)
  • Square (4)
  • Show More...

• Package Quantity

  

  • 1 (9)
  • 1 ct (29)
  • 1 CT;12 PK (1)
  • 1 CT;3 PK (3)
  • 1 CT;4 Pk (2)
  • 1 CT;6 Pk (10)
  • 10 (4)
  • 10 CT (1)
  • 100 (2)
  • 12 PK;1 CT (4)
  • 15 (1)
  • 2 (4)
  • 2 Bits (9)
  • 2 PK;1 CT (1)
  • 26 (1)
  • 26 PK (1)
  • 2-Pair (2)
  • 3 (4)
  • 3 CT (2)
  • 4 CT (1)
  • 5 (11)
  • 6 CT (16)
  • 6 PK;1 CT (1)
  • 72 (1)
  • Pair (2)
  • Show More...

• Special Features

  

  • : IR Thermometer, Laser Pointer, LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • 1/4-20 Threaded Hole for Tripod, Cross Bubble Vial, Leveling Base Included, Magnetic Mounting, V-groove (1)
  • 13-Foot Standout;Attachment Channel to Tether Tape Measure;Double-Sided Blade Printing;Easy-to-read Bold Lines Every 1/8-Inch;Tough Blade (1)
  • 16-Foot Reach;Attachment Channel to Tether Tape Measure;Double-Sided Blade Printing;Easy-to-Read Bold Lines Every 1/8-Inch;Tough Blade (2)
  • 16-Foot Reach;Attachment Channel to Tether Tape Measure;Easy-to-read Bold Lines Every 1/8-Inch;Tough Blade (1)
  • 25 Piece Master Electrician's Kit; Piano Hinged Metal Box Includes Latch with Padlock Eye and Handle (1)
  • 3 Orthogonal 360° Planar Lines;Rechargeable Battery, Magnetic Mounting Bracket with 1/4-20 Tripod Mounting Threads (1)
  • 3" (7.6 cm) Hollow Shafts (1)
  • 32.8 ft (10 m) Connectivity Range;Powerful Rear Magnet Holds Speaker to Metal Surfaces (1)
  • 39 Different Precision Bits Including Bits for Apple® Products, Magnetic (1)
  • 40% Slimmer Jaws (3)
  • 45° Tilt Capability (1)
  • 4X Stronger Than Traditional Klein Wire Strippers (1)
  • 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) (1)
  • 90-Degree Angled Leads (1)
  • Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment (2)
  • Adjustable Mounts Slide on Bar (1)
  • Adjustable Vents (3)
  • Allows use of K-Type Thermocouples into Banana Jacks (1)
  • Aluminum Titanium Nitride Coating; Dual Straight Fluting (1)
  • Angled Head (1)
  • Anti-fog, Scratch-resistant, Lightweight, Non-slip Fit (1)
  • Assisted Open (1)
  • Audible Alarm, Magnetic Base, V-Grooves on Top and Bottom (1)
  • Audible Alert, Auto-Power Off, Visual Notification (3)
  • Auto Power-Off (1)
  • Automatic Ranging for Measurement; NCVT (1)
  • Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; Added Temperature (1)
  • Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; HVAC Applications (1)
  • Auto-off Light Sensor; Battery Gauge; Fabric Strap (1)
  • Auto-off Light Sensor; Battery Gauge; Silicone Strap (1)
  • Auto-power Off, Max/Min, Hold, Auto-Ranging and Low Battery Icons (1)
  • Backlit Display for Clear Readings (1)
  • Battery Status Indicators, Rugged Chassis, Smart Battery Protection, Qualcomm® Quick Charge™ 3.0 Technology (1)
  • Bearing-Assist Opening Mechanism (1)
  • Belt Clip, Cable Guide, Adjustable Force Setting, Forward Action Design (1)
  • Breathable Mesh Back; Elastic Cuff with Silicone (2)
  • Broad Head for Larger Striking Surface (1)
  • Built-in Test Lead Holder and Integrated Flashlight (1)
  • Built-in Test Lead Holders on Back of Tester Spaced Correctly to Hold Leads for Testing Tamper-Resistant US-style Outlets (1)
  • Chain Tape Thong (2)
  • Class IIIa Red Laser; Focusable; Magnetic; Hands-Free (1)
  • Clover Design Features Four Different Sizes in One Tool (2)
  • Coats Better and 30% More Slippery than Gel or Wax Lubricants (1)
  • Color Coded, Splinterguard™, Stainless Steel Connectors, Magnet and Chain, Attachment Storage (1)
  • Color-Coded (1)
  • Combines Common Wire Stripping Sizes with a Crimper and Two Cutters (1)
  • Comes with One Blade Stored in Handle for Convenience; Depth of Cut Adjusts Between Standard MC and Reduced Diameter MC (1)
  • Compact and Lightweight (7)
  • Complete Kit for Preparing and Connecting F Connectors (1)
  • Concrete Tight (1)
  • Connects to all MODbox™ Tool and Part Pouches (1)
  • Convenient Chart on the Tester (2)
  • Crimper (2)
  • Crimper and Wire Stripping Holes (1)
  • Crimping Die Behind Hinge For Superior Leverage Crimping Non-Insulated Connectors, Lugs and Terminals. (2)
  • Cushion for Comfort, Integrated Pick and Spudger, MIM Blade for Accuracy and Durability (1)
  • Cushion Grip (2)
  • Cushion-grip Handle (1)
  • Cushion-Grip™ (1)
  • Cuts Acsr, Screws, Nails and Most Hardened Wire. (2)
  • Deep Pocket Clip (2)
  • Designed for use with Click Lock™ Modular System (3)
  • Detachable Body;Precision Machined 45° and 90° Edges;Rare-Earth Magnets (1)
  • Double Dipped (1)
  • Double Interlocking Hasp of Tempered Steel with Patented Interlocking Tabs for Extra Security (1)
  • D-Ring for Tethering (1)
  • Dual Targeting Lasers, 20:1 Distance-to-Spot Ratio; Hi/Low Limits with Simultaneous Audible and Visual Alarms When Limits are Breached; Bright Backlit Display; Works with K-Type Probe Also (1)
  • Durable and Comfortable;Stretch Back for Extra Comfort and Flexibility (2)
  • Ear Protection (1)
  • Easily Attaches and Releases from Tool Belts or MODbox™ Rail System (6)
  • Enhanced Storage Capacity, Compatible with MODbox™ Tool Pouches and Accessories (1)
  • Ensures Precise 90-Degree Bends and Eliminates Dog Legs (1)
  • Excess Tie Material is Automatically Cut Off (1)
  • Extended Cuff for Easy On/Off; Breathable and Comfortable (1)
  • Extended-Reach Keys (1)
  • External USB-C port (2)
  • Extra Capacity Size for Use in Confined Spaces (2)
  • Features Low Battery Indicator (3)
  • Features Low Battery Indicator and Auto Shut Off (1)
  • Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers (2)
  • Flame Retardant and Impact Resistant Handle (9)
  • Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle (1)
  • Flashlight with Work Light Side Barrel LEDs, Magnetic End Cap, Battery Life Indicator, Long-Lasting Battery (1)
  • Flashlight, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • Fleece Lining; High-Visibility Yellow Trim (1)
  • Flexible Drill Bit Made of Spring Steel for Extreme Flexibility (1)
  • Flexible Gooseneck (1)
  • Flip Feature, Nested Adapter (1)
  • Flip Socket, Rare-Earth Magnet (3)
  • Folding (1)
  • Folds for Easy Storage (1)
  • Forged - 4 Times Stronger Than Traditional Klein Wire Strippers (1)
  • Forged Steel, 4 Times Stronger Than Traditional Klein Wire Strippers (1)
  • Function Selector Switch;Test Lead Input Jacks (1)
  • Gel and EVA Foam, Slip Resistant Rubber Caps (1)
  • General-purpose selection of the most frequently used nut drivers. (1)
  • Glow in the Dark Grips (1)
  • Glow-in-the-Dark Tape and Tip, Clear Case, Removable Tape, Equipped with Fish Rod Attachment Connector (1)
  • Green Led Turns Off and Red Led Illuminates Continuously. (1)
  • Grips charge in natural and artificial lighting. (1)
  • Heavy Duty Reinforced Bottom (1)
  • High and Low Temperature Points, Crosshairs to Pinpoint Specific Temperatures, Options for Temperature Alarms, 3 Color Pallets (1)
  • High and Low Temperature Points, Touch-Point Temperature, Options for Temperature Alarms, Time-Lapse Video, 3 Color Palettes, No Batteries Needed (1)
  • High Intensity White Spotlight and Floodlight, Low-Intensity Red LEDs, Battery Life Indicator, Easy Carry Holster, Magnetic End Cap (1)
  • High Intensity White Spotlight and Floodlight, Low-Intensity Red LEDs, Magnet, Battery Gauge; Fabric Strap with Pencil/Marker Holder (1)
  • High leverage (1)
  • High Leverage, Integrated Stripping Hole (1)
  • High Temperature Range (1)
  • High Visibility Coating, Hands-Free Adjustment (1)
  • High-Leverage (1)
  • High-Leverage Design (1)
  • High-Leverage Design;Cross-Hatched Knurl (1)
  • Highly Resistant to Acids, Alkalis, and Other soil Components (1)
  • High-Visibility Display with Optical Sensor; Auto-Range; Min/Max/Relative; Low Impedance (LoZ) Mode; Auto Power-Off; Data Hold (1)
  • High-Visibility Orange Body (1)
  • Hinged Design, Extra Layer of Wind Protectant Fabric in front (1)
  • Hollow Shaft, Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length (1)
  • Ideal for Plastic Tubing (1)
  • Impact Rated, Quick Connect Handle, 1/4" Deep Bit Holding (1)
  • Includes core wire stripper/cutter;Wire looping and bending holes;Precision-ground stripping holes for easy removal of insulation;Easy-to-read wire gauge markings on both sides for stripping in either direction;Black-oxide finish resists corrosion (3)
  • Includes Crimper (1)
  • Includes Klein-Kurve(TM) Core Features Plus;Double Dipped Comfort Grips;Handy Closure Lock for Convenient Storage;Screw Shearing Holes;Precision Ground Stripping Holes;Coil Spring Provides Fast Self-Opening Action;Wire Looping and Bending Holes;Strong Gripping Serrated Nose for Easy Bending, Shaping, and Pulling of Wire (3)
  • Increased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs) (1)
  • Induction-hardened 440A Stainless Steel Construction (1)
  • Integrated High Strength Red Laser Pointer, Dual Range Tester (70-1000V; 12V-1000V) AC Voltage Detection, Simultaneous Visual and Audible Voltage Indicators in the Presence of AC Voltage; US Patent No. D750985 (1)
  • Integrated Hole for Wire Looping, Magnetic (1)
  • Integrated Lock (1)
  • Integrated Precision Nut and Screwdriver; Spin Cap and Cushion-Grip Handle for Great Control (2)
  • IP67 Rated (1)
  • Klein Tools' Interchangeable Multi-Bit Screwdrivers/Nut Drivers Are Heavy-Duty Tools Designed For Professionals. They Are Made Of The Highest-Quality Tempered Steel With A Torque-Proof Anchor In The Handle. Strong, Durable Tips Are Manufactured With Squar (3)
  • Knife Snap (3)
  • Lanyard Hole Allows for Tethering and Safekeeping (1)
  • Large LCD Display; Patent Pending Detection of Open Neutral Open Ground Wiring Fault; Shows Amount of Time it Takes to Trip GFCI (1)
  • Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • Lead Alert; Backlight; Auto Power-Off; Data Hold (1)
  • Lead-Alert; Auto-Range; Min/Max Measurements; Backlight; Auto Power-Off; Data-Hold (1)
  • Leather construction. (1)
  • LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (2)
  • Light Array, Magnet, Battery Gauge; Fabric Strap with Pencil/Marker Holder (1)
  • Lightweight and Compact (1)
  • Lots of Room for Tools (1)
  • Low Battery Indicator, Built-in Test Lead Holders, Backlit Display (1)
  • Low Impedance (LoZ) Mode; Dedicated Mode for Capturing Inrush Current; Integrated Non-Contact Voltage Tester (1)
  • Magnets, Clamp, Full Rotation, Battery Gauge, Nail Hole (1)
  • Max/Min, Hold and Average Functions; Auto Power Off (2)
  • Measures Cable Length; Backlit LCD; Hub Blink (1)
  • Measures Current to 400A AC/DC with the Clamp. Integrated Non-Contact Voltage Tester on the Clamp. High Visibility Reverse Contrast LCD Display for Improved Viewability in all Ambient Lighting Conditions. Low Battery Indicator. DC microamp Current (1)
  • Metal Belt Clip, Magnetic Flap, Elastic Sides to Fit Various Sizes (1)
  • Milled Face (1)
  • Modular Case, Aluminum Titanium Nitride Coating; Dual Spiral Fluting; Cutting Oil Included (1)
  • Molded Bottom, Padded Back, Load Adjustment Straps, Headlamp Bracket and Bottle Opener (1)
  • Newly Crimped on Eyelets Meet or Exceed Original Factory Pulling Strength Requirements (1)
  • NM-B Staple Pulling;Tether Hole for Hanging (1)
  • No Batteries Required (1)
  • No. 2 Phillips Screwdriver, 3 Wire Stripping Notches (1)
  • Non-conductive fish tape and eyelet tip offer added protection against shock from energized sources. (1)
  • Non-Slip Grip;TPR on Back of Hand for Extra Protection;Cut Resistant (2)
  • On-Board Storage of Specialty Tamperproof Bits, Magnetic (1)
  • Optimized Housing Design; Multi-Groove Fiberglass Tape (2)
  • Optimized Teeth Pattern for Fast, Consistent Cutting of Steel Including Stainless (1)
  • Oversized (1)
  • Padded Liner with Breathable Mesh; Loop Tape Measure Holder (3)
  • Patent Pending Angle Setter™ Technology (3)
  • Patented Magnet Track Secures Level to Surfaces (1)
  • Patented Magnet Track Secures the Level to Any Metal Surface (2)
  • Perfect For the Trade Apprentice Starting Out (2)
  • Pivoting Light Head (1)
  • Plastic-Dipped, Cushioned Handles (1)
  • Pocket Sized, IR and Probe Thermometer; Hanging Hook for Use with Air Vents (1)
  • Precision Machined; Heat Treated (2)
  • Proflex Torsion Zone - Impact Ready, Spring Loaded Clip, Modular Case (1)
  • Pulls Flat Steel Fish Tape (1)
  • Quick Release Plate (1)
  • Rare Earth Magnet in Lower Barrel (1)
  • Rare Earth Magnetic Tips; Heavy Duty (1)
  • Rare Earth Magnets (1)
  • Rare Earth Magnets, Adjustable Bubble Vial, V-Groove on Top (1)
  • Rare Earth Magnets; Contoured Shape (1)
  • Rare-Earth Magnets (1)
  • Ratchet Safety-Release and a Blade-Guard on Cutting and Stripping Knives Reduce Risk of Injury (1)
  • Ratcheting Handle, Impact Rated Components and 1/4" Quick Connect (1)
  • Ratcheting Mechanism (2)
  • Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage (1)
  • Reinforced Bottom (1)
  • Reinforced Bottom, Stand-Up Pouch (1)
  • Reinforced Head (1)
  • Removable 11 Pocket Tool Caddy, Water Resistant (1)
  • Replaceable Blade Knife (1)
  • Rotating Cap for Optimum and Precise Control (2)
  • Rotating Cap, Cushion-Grip™ Handle (1)
  • Scraper, File, Stripping Notches, Serrated Blades (1)
  • Screw Holding (1)
  • Screwdriver Leverage Hole In Head to Provide Extra Torque (1)
  • Secure Tongue and Groove Design For Non-Slip Grip - Even With Heavy Pressure. (2)
  • Serrated Blades, Notches (1)
  • Several Calculation Modes to Facilitate Different Temperature Measurement Applications (1)
  • Situational Awareness, Bluetooth, 23NRR, Dual-Volume Knobs, Hands-Free Calling, Vented Headband, Environmental Noise Cancelling Microphones (1)
  • Slide Drive™ (3)
  • Slim Fit for High Dexterity (1)
  • Slim Profile (1)
  • Slim Profile Tips (1)
  • Slim Profile Tips, Induction Hardened Cutting Blades and 1000V Rated (1)
  • Slim Profile; Lead-Alert; High-Visibility Display with Optical Sensor; Auto-Range; Min/Max Measurements; Auto Power-Off; Data-Hold (1)
  • Split Point Pilot Drill Bit (118°) and Integrated Flange (1)
  • Split Point Pilot Drill Bit to Prevent Bit Walking; Integrated Flange to Prevent the Operator from Drilling Beyond Sheet Metal (2)
  • Spring Loaded (1)
  • Spring Loaded For Opening Action (1)
  • Spring-action Lock (1)
  • Spring-Loaded (1)
  • Standard and Metric Sizes Marked for Fast Adjustment (1)
  • Standard length for most applications. (1)
  • Stay Open Top (1)
  • Stays Cool up to 12 Hours (1)
  • Stitched and Riveted Leather Construction (1)
  • Strips Six Standard Sizes (1)
  • Strong Magnets, Longer Length Bits (1)
  • Supplies Power to Job Sites, Integrated LED Lights (1)
  • Telescoping Handle Extends to 39-1/2", 6" dia. Wheels, Molded Kick Plate, Orange Interior, Water Resistant (1)
  • Tenite Plastic for Slip-Resistant Grip and Comfort (2)
  • Tested up to 20kV (5)
  • Tests AFCI and GFCI, Simulates Ground Fault and Arc Flash Conditions, Detects Dual-Open Wiring Fault (1)
  • Tether Hole for Hanging (2)
  • Tight Space Cutting (1)
  • Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. (1)
  • Tip-Ident Quickly Identifies Nut Driver Size (4)
  • Tip-Ident® Quickly Identifies the Screwdriver Type and Tip Orientation (1)
  • Tip-Ident® Quickly Identifies the Type of Screwdriver and Tip Orientation (1)
  • Tip-Ident®; Cushion-Grip (2)
  • Touchscreen Capability on Index Finger;Non-Slip Grip (2)
  • Touchscreen Capable Fingertips (8)
  • Tough, Durable Rubber Feet Protect from the Elements (2)
  • Tough, durable rubber feet protect from the elements. (5)
  • TPR Knuckles, Reinforced Leather Palm/Fingertips/Thumb, Hook and Loop Closure (2)
  • Transmitter docks in Receiver Transmitter integrated GFCI outlet tester in receiver (1)
  • Triple Layer Protection; Breathable Mesh Back; Elastic Cuff with Silicone (2)
  • Triple-Ground Edges (1)
  • Twist On/Off Removable Led Light with Swivel Hook and Magnet, Orange Interior for Easy Tool Visibility, Fully Molded Bottom Protects From the Elements, Shoulder Strap and Padded Handles (1)
  • Uncluttered, easy to read bold lines every 1/8" (2)
  • Uncluttered;Easy to Read Bold Lines Every 1/8" (2)
  • Unique jaw design provides multiple points of contact for maximum torque. (1)
  • US Patent 10,073,142, D750,985 and Other Patents Pending (1)
  • USB-C Rechargeable; Reverse Contrast LCD Display; Green Laser; Hard Case with Belt Clip (1)
  • Vintage Klein Tools Logo (1)
  • Water Resistant (1)
  • Waterproof, Removable Dual-Direction Pocket Clip, Removable Lanyard (1)
  • Wide Foot Pedal for Stability, Leverage and Comfort (1)
  • Worklight with Flashlight Included (1)
  • Wrench Assist for Additional Torque (1)
  • Wrench Assist for Greater Torque (4)
  • Show More...

• Package Type

  

  • Carrying Case (1)
  • Carton (1)
  • Show More...

• Category Description

  

  • ADHESIVES (1)
  • BITS, BLADES, AND HOLE SAWS (59)
  • FLASHLIGHTS AND BATTERIES (5)
  • Fuses & Fuse Accessories (2)
  • HAND TOOLS (388)
  • Job Site & Safety Apparel (25)
  • PULL LINE, ROPE, CARRIERS (1)
  • SAFETY PRODUCTS (13)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (1)
  • SPLICE KITS (2)
  • TAPE (1)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (57)
  • TOOL BAG/POUCHES (63)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (11)
  • WIRE LUBE, MARKERS, & TIES (5)
  • Show More...

• Color Code

  

  • — (4)
  • BLACK (1)
  • Black/ Yellow (1)
  • BLUE (6)
  • BROWN (4)
  • GREEN (1)
  • ORANGE (8)
  • RED (10)
  • YELLOW (6)
  • Yes (1)
  • Show More...

• Handle Type

  

  • — (1)
  • Aluminum (1)
  • Bender Head (1)
  • Black Plastic (1)
  • Black Powder Coat on Alloy (1)
  • Color-Coded Handles (3)
  • Comfort Grip (1)
  • Curved (1)
  • CUSHION GRIP (28)
  • Cushion-Grip (8)
  • Cushion-Grip with Spin Top (2)
  • Double Dipped for Comfort Grips (3)
  • Dual-Material Journeyman Grip (2)
  • Ergonomic (1)
  • Folding Pocket Style (1)
  • Handle Grips for Comfort (1)
  • Lightweight (2)
  • Nut Type Utility (1)
  • Plastic Contoured Grip (1)
  • Plastic Covered Cushioned Handles (1)
  • Plastic Dipped (1)
  • Plastic-Covered Cushioned Handles (1)
  • Plastic-Covered Handles (1)
  • Ratcheting (1)
  • Ratcheting Quick Connect (1)
  • Skeleton (2)
  • Slim (4)
  • Soft Grip Ergonomic (1)
  • Soft Touch Grip (1)
  • Ultra-comfortable hand grip (1)
  • Show More...

• Size

  

  • 1/2", 3/4" (1)
  • 1/2", 3/4" and 1" (1)
  • 1/2", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32" (1)
  • 1/2", 9/16" 5/8", 3/4" (1)
  • 1/8" to 1/2" (3.2 to 12.7 mm); 1/4" to 3/4" (6.4 to 19.1 mm); 3/16" to 7/8" (4.8 mm to 22.2 mm) (1)
  • 1/8" to 1/2" (3.2 to 12.7 mm); 1/4" to 3/4" (6.4 to 19.1 mm); 3/16" to 7/8" (4.8 to 22.2 mm); 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 13 x 29.5 (33 x 74.9 cm) (1)
  • 19 oz (0.6 L) (1)
  • 3/16" to 7/8" (4.8 to 22.2 mm) (1)
  • 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 7/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16", 3/8" (1)
  • 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1)
  • 3/8" x 2-5/8" (1 x 6.7 cm) (1)
  • 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1)
  • 7.9 x 0.6 x 1.6 in;20.1 x 1.5 x 4.1 mm (1)
  • 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 72-Count Bucket (1)
  • Extra Large (4)
  • Extra-Large (8)
  • Extra-Large (10) (1)
  • Large (14)
  • M/L (1)
  • Medium (2)
  • One Size Fits Most (5)
  • Small (2)
  • X-Large (2)
  • XX-Large (1)
  • Show More...

• Voltage

  

  • — (1)
  • 1000V AC/DC (2)
  • 1000V AC; 1000 V DC (1)
  • 1000V AC; 1000V DC (3)
  • 110/125V AC at 50/60Hz in 3-Wire Outlet (2)
  • 12 - 1000V AC (4)
  • 12 to 1000 VAC (1)
  • 12 to 600 V AC/DC (2)
  • 120V AC in 3-Wire Grounded Electrical Outlet (1)
  • 12-1000V AC (1)
  • 125V (1)
  • 135V AC (1)
  • 2 to 600V AC/DC (2)
  • 50 - 1000V AC (2)
  • 600 V AC/DC (4)
  • 600V AC, 1000V DC (1)
  • 600V AC/DC (5)
  • 600V AC; 600 V DC (1)
  • 600V AC; 600V DC (1)
  • AC Level Indicators: 12V, 24V, 120V, 240V and DC Indicators:1.5V, 9V, 12V, >17-24V (1)
  • AC Level Indicators: 24V, 48V, 120V, 240V; DC Level Indicators: 32V, 64V, 160V, 330V (1)
  • Charging: 5V ± 0.25V (1)
  • External Indicators for 12V, 48V, 120V, 240V, and 480V (1)
  • Low: 50V AC - 1.5kV AC High: 1.5kV AC - 132kV AC (1)
  • Range 1: 12 – 1000V AC; Range 2: 70 – 1000V AC (2)
  • Show More...

• Type

  

  • 0.80 oz (22.7 g) (1)
  • 11-in-1 Impact (1)
  • 7-in-1 Multi-Bit (1)
  • AC/DC Current TRMS Clamp (1)
  • Accessory (1)
  • ACCU-BEND™ Conduit and Pipe (2)
  • ADJUSTABLE (1)
  • Adjustable Pump Pliers (1)
  • Adjustable-Length Screwdriver (1)
  • AFCI/GFCI Electrical Battery Operated Outlet Tester (1)
  • All-Purpose (1)
  • All-Purpose Pliers - Crimping (1)
  • All-Purpose Pliers - Spring Loaded (1)
  • Apprentice Tool Set (2)
  • Assisted-Open (1)
  • Auto Ranging Clamp (1)
  • Auto Ranging TRMS Clamp with Temperature (1)
  • Aviation (1)
  • Awl (2)
  • Benfield® Head Iron Conduit Bender (1)
  • Bi Metal (1)
  • Blade (1)
  • Bluetooth® Wireless Speaker (1)
  • BROAD HEAD (1)
  • Bubble with Adjustable Vial (1)
  • BX and Armored Cable Cutter (1)
  • Cable Cutter (8)
  • Carbide Hole Cutter (2)
  • Carbon Monoxide Meter (1)
  • CE Cut Level 5 (2)
  • Circuit Tracer (1)
  • CLAMP METER (2)
  • Clamp Meter Kit (1)
  • Clamp Meter with AC and Type K Thermocouple Thermometer (1)
  • Click Lock™ Modular (7)
  • Closed Case, Double Sided (1)
  • Closed Case, Double Sided Single Non-Magnetic Hook (1)
  • Closed Case, Double Sided, Magnetic Hook (3)
  • Color-Coded (1)
  • COMBINATION (1)
  • COMPACT (1)
  • Conduit Bender (1)
  • Conduit Bender Handle (2)
  • Conduit Reamer Drill Head for 1/2", 3/4", 1" (1)
  • Conduit Reamer Replacement Blade Kit (1)
  • Conduit Tool (1)
  • Connector Crimping (1)
  • Cooler (1)
  • Cooling Towel (1)
  • Crimper (1)
  • Cut-Resistant Level 2 Gloves (1)
  • Diagonal Cutting Pliers (15)
  • Digital Level (1)
  • Digital Light Meter (1)
  • DIGITAL MULTIMETER (4)
  • Digital Thermometer (2)
  • Digital Voltage and Continuity Tester (1)
  • Double Sided (2)
  • Drill Tap Kit (1)
  • Dual Laser Infrared Thermometer (1)
  • Dual Range (1)
  • Dual Range for NCVT-2P (1)
  • Dual Range with Flashlight (1)
  • Dual Wire Cutter Crimper Stripper (1)
  • Dual-Laser Infrared Thermometer (1)
  • Electricians Tool Set (2)
  • ELECTRONIC (1)
  • Electronic Products (1)
  • Electronic Tester (1)
  • Electronics (1)
  • Extra Capacity Adjustable Wrench (3)
  • Extra Slim Adjustable Wrench (3)
  • Fan with Rechargeable Internal Battery (1)
  • Female to Female (1)
  • Fiberglass Fish Tape (3)
  • Fish Rods (1)
  • Fish Tape (2)
  • Fixed Blade Screwdriver (1)
  • Flashlight (3)
  • Fleece Liner (1)
  • Flex Bit, Wire Placement Tool, and Grip Kit (1)
  • Flexible AC Current Clamp (1)
  • Foam (1)
  • Folding Hex Key (1)
  • Folding Jab Saw (1)
  • Folding Set (3)
  • GFCI and Standard Receptacle Tester (2)
  • GFCI Receptacle Tester (1)
  • HAMMER (1)
  • Hard Side Cooler (1)
  • Headlamp (2)
  • Headlamp with Rechargeable Internal Battery (3)
  • HEAVY DUTY (3)
  • Heavy Duty High Leverage Crimping Pliers (1)
  • Heavy Duty High Leverage Side Cutting/Crimping Pliers (1)
  • Heavy Duty, Shear Cutting (1)
  • Heavy-Duty Alligator Clip (1)
  • Hex Driver (4)
  • High Leverage Side Cutting/Connector Crimping Pliers (2)
  • High Leverage Side Cutting/Pulling Pliers (1)
  • High Leverage Stripping Crimping Shearing Side-Cut Hybrid Plier (2)
  • High Tension (1)
  • High-Visibility (1)
  • Hole Cutter Pilot Bit (1)
  • Hollow (5)
  • Hollow Shaft Nut Driver Set (1)
  • HVAC Nylon Tie Tensioning Tools (1)
  • HVAC TRMS Clamp (1)
  • HVAC; Magnetic (1)
  • Ice Pack (1)
  • Impact Flip Socket (3)
  • Impact Rated (2)
  • Impact Socket (1)
  • INSULATED (1)
  • Insulated Screwdriver Set (2)
  • Insulated Staples Stapler (1)
  • Insulated, Interchangeable Blade (1)
  • Iron Bender Head (1)
  • Iron Conduit Bender (3)
  • Ironworker's Pliers (1)
  • Journeyman Combination Pliers (1)
  • Knee Sleeves (4)
  • Knife and Scissors (1)
  • Knife Sharpener (1)
  • Knit Beanie with Fleece Lining (1)
  • Knit Dipped (8)
  • Knit Hat (1)
  • Knockout Draw Stud (1)
  • Knockout Punch with Wrench (1)
  • K-Type Banana Plug Adapter (1)
  • K-Type Thermocouple, High Temperature with Adapter (1)
  • Large Cable (2)
  • Laser and Bubble (1)
  • Laser Reflection, Class 2 Laser (2)
  • Lightweight Gel Knee Pad (1)
  • Locknut Wrench Set (1)
  • Lockout with Interlocking Tabs (1)
  • Long Nose Diagonal Cutting Pliers (1)
  • Long Nose Pliers (3)
  • Long Nose Side Cutting Pliers (8)
  • MAGNETIC (2)
  • Magnetic Lighted Torpedo Billet (1)
  • Magnetic Multi-Bit Nut Driver (1)
  • Magnetic Multi-Bit Screwdriver (1)
  • Magnetic Multi-Bit Tamperproof Screwdriver (1)
  • Magnetic Wristband (1)
  • Manual Bottle Opener (1)
  • Master Electrician's Torque Wrenches (1)
  • Mini Ratcheting (1)
  • MODbox™ Tool Pouch (3)
  • MODbox™ Accessory (1)
  • MODbox™ Tool Pouch (1)
  • Multi-Bit Magnetic Screwdriver (1)
  • Multi-Bit Ratcheting Screwdriver (1)
  • Multi-bit Screwdriver (1)
  • Multi-Bit Screwdriver and Nut Driver (1)
  • Multi-Bit Screwdrivers (2)
  • Multi-Tool (1)
  • Multi-Tool Wire Stripper (1)
  • NM-B Cable 12/2 and 14/2 (1)
  • Non-Contact (2)
  • Non-Contact Voltage Tester (2)
  • Nut Driver Kit (1)
  • Nut Driver Set (1)
  • Open Jaw Fork Current Meter (1)
  • Padded Strapped Backpack (1)
  • Padded Tool Belt (1)
  • Phone Holder with Belt Clip (6)
  • Pinless Moisture Meter (1)
  • Pocket Infrared Thermometer with Laser and Temperature Probe (1)
  • Pocket Knife (5)
  • Pocket Screwdriver (1)
  • Pole & Tree Climbers Straps (1)
  • Pouch (1)
  • Power Supply (1)
  • Pre-Lubricated, Flat Pull Tape with 1' Markings (1)
  • Punchdown Kit (1)
  • Quick Connect (1)
  • Ratcheting Cable Cutter (1)
  • RECESSED (1)
  • Rechargeable Battery (1)
  • Rechargeable LED with Laser (1)
  • Replacement Blade (2)
  • Replacement Blade Set (1)
  • Replacement Blades (1)
  • Replacement Tap (2)
  • Safety Eyewear (1)
  • Screwdriver Set (4)
  • Self-Leveling Laser Level (2)
  • Side Cutting Pliers (9)
  • Side Cutting/Crimping (1)
  • Situational Awareness Bluetooth Earmuffs (1)
  • Slim-Tip Insulated Screwdriver (1)
  • Slotted Screwdriver (1)
  • Socket Wrench Set (1)
  • Soft Side Cooler (1)
  • Soft Sided (3)
  • Solid-State, Low Impedance, Electronic Voltage Tester (1)
  • STANDARD (1)
  • Stand-Up (2)
  • Staright-Claw Hammer (1)
  • Steel Fish Tape (1)
  • Step Drill Bit (3)
  • Step Drill Bit Set (1)
  • Straight-Claw Hammer (2)
  • Tamperproof TORX ® (1)
  • Telescoping Magnetic LED (1)
  • Thermal Imager (3)
  • Tool Backpack (4)
  • Tool Bag (1)
  • Tool Kit (1)
  • Tool Pouch (2)
  • Tool Rolling Backpack (1)
  • Torpedo (3)
  • Torque Screwdriver Set (1)
  • Touchscreen (1)
  • Tubing Cutter (2)
  • Twist Rotating Head (1)
  • Twisted Pair, DATA, Voice, LAN, and Coaxial (1)
  • Type 1 (8)
  • UTILITY (2)
  • Utility Cart (1)
  • Voltage Tester Pen (1)
  • Wind Proof Hinged Balaclava (1)
  • Winter Work Gloves (1)
  • Wire Stripper/Cutter (1)
  • Work Gloves (2)
  • Zipper Pouch (1)
  • Show More...