Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • #6 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • #8 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (2)
  • 3/4" Staples Plastic Insulated 2 Conductor Romex 12-3 (2)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (4)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (10)
  • 3M™ Cold Shrink End Caps Ec Series (4)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (2)
  • 3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 551 (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (2)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-S, 7680-S & 7690 (10)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-T & 7690-T Serie (9)
  • 3M™ Heat Shrink Cable Breakout Boot (3)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (8)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (22)
  • 3M™ Motor Lead Pigtail Splice Kits 5316-5319 (2)
  • 3M™ Motor Lead Pigtail Splice Kits, 1-Hole Lug Connections 5 (5)
  • 3M™ Rejacketing Sleeves RJS Series (5)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchcode™ Wire Marker Tape Dispenser STD (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (11)
  • 3M™ Scotchcode™ Wire Marker Write-On Dispensers (3)
  • 3M™ Scotchflex™ Cable Tie Base (2)
  • 3M™ Splice Kit Uf (3)
  • 3M™ Standard Nylon Cable Ties (4)
  • 6 X 1-1/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • 6 X 1-5/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • Aluminum to Copper Lug (1)
  • Anchor Kit (5)
  • Automatic Tension Splice Connector (2)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Barrier Strip (3)
  • Beam Clamp (3)
  • Butt Splice Connector (2)
  • Cable Connector (2)
  • Cable Holder (1)
  • Cable Hook (2)
  • Cable Splice Kit (1)
  • Cable Staple (12)
  • Cable Tie (58)
  • Cable Tie Mount (4)
  • Cable Tie Mounting Base (9)
  • Ceiling Wire (1)
  • Clip, Conduit, (4)
  • CMP Lug Cu Long 6 Awg 1/4 BLT 5/8 SPC (2)
  • Combo Nut Washer, 1/4"-20 Thread (2)
  • Combo Nut Washer, 3/8"-16 Thread (2)
  • Compression (14)
  • Compression Connector (7)
  • Compression Lug (8)
  • Compression Splice Connector (3)
  • Concrete Anchor System (3)
  • Conductor Lug (11)
  • Conduit Support (1)
  • Conduit to Beam Fastener (1)
  • Conduit to Conduit Fastener (1)
  • Conduit to Rod FS, Guide-Rite, 1/2", 3/4" Conduit Size (2)
  • Copper Compression Lug (5)
  • Crimp On Wire Connector (2)
  • Disconnect Terminal (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drywall Screw (4)
  • Easy-Splice Roll On (2)
  • Electrical Tape (9)
  • End Cover (1)
  • Flat Washer (8)
  • Flexible Component Label (2)
  • Friction Tape (2)
  • Ganging Tool (1)
  • Ground Connector (3)
  • Ground Screw (2)
  • Heat Shrink Splice (1)
  • Heat Shrink Tube (5)
  • Heat Shrink Tube Label (2)
  • Heat Shrink Tubing (1)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Nut (6)
  • Hook (1)
  • Inline Resin Splicing Kits (2)
  • Installation Tool - Phillips and Hex Head (2)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Staples (4)
  • Insulation-Tap Connector (9)
  • Jack Chain (1)
  • J-Hook with Retainer (1)
  • K-Lath Screw (5)
  • Label (3)
  • Lag Screw (6)
  • Line and Load Terminal (1)
  • Linerless Rubber Tape (4)
  • Lock Washer (4)
  • Low Voltage Splice (1)
  • Lug (1)
  • Machine Screw (18)
  • Machine Screw Anchor (2)
  • Marker Card (1)
  • Mechanical (61)
  • Mechanical Grounding Connector (1)
  • Mechanical Lug (1)
  • Metal Piercing Screw (3)
  • Molds (2)
  • Motor Lead Pigtail Splicing Kit (1)
  • Multi-Cable Staple (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Non-Metallic Cable Connector (2)
  • Nylon Label (2)
  • P1™ Heat Shrink Label (3)
  • Pipe Wrap (1)
  • Plastic Insulated Staple (4)
  • Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Tap C (2)
  • Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Tap CO (2)
  • Power Cable Splice Cover (4)
  • Power Cable Termination (4)
  • Pre-Printed Wire Marker Book (2)
  • Purlin Clip (1)
  • Push-in Wire Connector (7)
  • Quick-Rotating (1)
  • Rebar Clamp (1)
  • Ring Tongue Compression Terminal (5)
  • Rod & Wire FS (2)
  • Roof Flashing (2)
  • Roof Jack (2)
  • Scotch® Linerless Rubber Splicing Tape 130C (4)
  • Scotch® Multi-Colored Vinyl Electrical Tape 35 (14)
  • Screw Connection Single Level-Through-Feed (3)
  • Self Drilling Screw (23)
  • Service Entrance Compression Splice (5)
  • Service Entrance Strap (2)
  • Service Post Connector (8)
  • Sheet Metal Screw (10)
  • S-Hook (1)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Sleeve Anchor (4)
  • Spade Terminal (1)
  • Spiral Wrap (1)
  • Splice (7)
  • Splice Cap (2)
  • Splice Cap Insulator (1)
  • Splice Connector (2)
  • Splice Kit (3)
  • Splicing Tape (1)
  • Spring Nut (2)
  • Square Washer (1)
  • Staple (23)
  • Submersible Connector (2)
  • Tap Bolt (15)
  • Tapered Anchor (1)
  • Terminal (20)
  • Terminal Kit (1)
  • Terminal Lug (3)
  • Terminal Strip (5)
  • Thin Wall Heat Shrink Tube (13)
  • Thin Wall Shrink Tube (13)
  • Tie Wire (4)
  • Toggle Bolt (5)
  • Twirl Nut (2)
  • Twirl-Nut, 1/2"-13 Thread, 1/2" Nut (2)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (4)
  • Twist-On Wire Nut (5)
  • Underground In Line Splice (1)
  • Vinyl Electrical Tape 7MIL .75" 60FT RD (2)
  • Vyl Elec Tape Premium 7MIL .75" 60FT RD (2)
  • Wall Driller Anchor Kit (3)
  • Warrior Wrap High Voltage 69KV Linerless Rubber Splicing Tap (2)
  • Web Strap (1)
  • Wedge Anchor (8)
  • Wedge Clamp (3)
  • Wing Twist Connector (2)
  • Wire Clip (4)
  • Wire Connector (10)
  • Wire Marker Book (10)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (5)
  • Wire Twist Connector (6)
  • Wood Rocket Kit (1)
  • Zamac Anchor (4)
  • Show More...

• Brand

  

  • 3M (126)
  • ABB (15)
  • ARLINGTON (2)
  • Arlington Industries (2)
  • Blackburn Grounding (11)
  • Blackburn Mechanical (33)
  • BRADY (3)
  • Brady® (35)
  • Bridgeport (1)
  • BRISCON (2)
  • Buchanan (45)
  • BURNDY (215)
  • Burndy LLC (4)
  • CADDY (1)
  • Catamount (26)
  • COLOR-KEYED (1)
  • Cooper B-Line/Cable Tray (1)
  • COOPER WIRING DEVICES (1)
  • Crouse-Hinds (1)
  • Deltec (2)
  • Dottie (6)
  • DOTTIE L H COMPANY (1)
  • DYMO (4)
  • Eaton (95)
  • Eaton Corp (4)
  • EATON CROUSE-HINDS SERIES (2)
  • EATON CUTLER-HAMMER (18)
  • Engineered Products CO. (1)
  • Erico, Inc. Eritec-Caddy (8)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • FASTENERS, INC. (3)
  • Gardner Bender (27)
  • Hellermanntyton (4)
  • Ideal (119)
  • Ilsco (18)
  • Ilsco Corporation (18)
  • Klein Tools (2)
  • L.H. Dottie CO. (18)
  • LH DOTTIE (325)
  • milwaukee (1)
  • Minnesota Mining (3M) (45)
  • Newell (Dymo) (5)
  • NSi (44)
  • Nsi Industries (75)
  • nVent CADDY (28)
  • PANDUIT (190)
  • Panduit Corporation (6)
  • Panduit® (76)
  • Pass & Seymour (1)
  • Peco Fasteners, Inc. (4)
  • Polaris (122)
  • Rack-A-Tiers (4)
  • Scotch (31)
  • Scotchcast (3)
  • ScotchCode (5)
  • Shrink-Kon (1)
  • Southwire (2)
  • Southwire Rough Electrical Com (2)
  • Super 33+ (2)
  • T&B Elec Suppl (10)
  • TE CONNECTIVITY / ENERGY (3)
  • Temflex (8)
  • Thomas & Betts (16)
  • Thomas&Betts-Abb Ins Prod (2)
  • Ty-Grip (1)
  • Ty-Rap (65)
  • W.W. Cross Inc. (9)
  • WarriorWrap (3)
  • Show More...

• Style

  

  • 4-Way (2)
  • Extra Heavy-Duty (2)
  • Heavy-Duty (5)
  • Intermediate (8)
  • Miniature (5)
  • Self-Adhesive (9)
  • Standard (22)
  • Show More...

• Material

  

  • 18-8 STAINLESS STEEL (4)
  • Aluminum (92)
  • B-499 Nylon Cloth (3)
  • Bronze Alloy, Leaded (12)
  • Bronze, Leaded, Commercial (8)
  • Carbon Steel (16)
  • Cold Rolled High Carbon Steel (21)
  • Copper (134)
  • COPPER ALLOY (17)
  • Copper Alloy, Cast (5)
  • Copper Sleeves (2)
  • EPDM RUBBER (1)
  • Flame-retardant Polypropelene (53)
  • Flame-retardant polypropelene shell (10)
  • FLEXIBLE POLYOLEFIN (1)
  • Galvanized Steel (2)
  • Graphite Metallic Steel (8)
  • Heat-shrink Polyolefin (12)
  • IRON (5)
  • Lead (2)
  • Linerless EPR (4)
  • Low Carbon Steel (17)
  • Nylon (16)
  • NYLON 6 (1)
  • Nylon 6.6 (5)
  • Nylon 6/6 (13)
  • Nylon 6-6 (3)
  • Nylon Housing, Copper Alloy Contacts (3)
  • Nylon/Polyamide 6.6 (35)
  • PET (8)
  • Plastic (12)
  • Plastic Housing (3)
  • PLASTIC INSULATED CARBON STEEL (2)
  • Plastic-Impregnated Cloth (8)
  • Polyamide (15)
  • Polyester (9)
  • Polyethylene (12)
  • Polyolefin (39)
  • Polypropylene (6)
  • Polyvinyl Chloride (2)
  • Pre-Galvanized Steel (4)
  • Self-Laminating Vinyl (4)
  • Silicon Bronze (4)
  • SILICONE RUBBER (1)
  • Smooth Plastic (8)
  • Stainless Steel (12)
  • Steel (311)
  • Steel (Screw) (5)
  • Thermoplastic (5)
  • THERMOPLASTIC POLYESTER (1)
  • TIN PLATED BRASS (2)
  • TIN PLATED COPPER (1)
  • Tin-Plated Copper (54)
  • Vinyl (60)
  • Vinyl Cloth (10)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (3)
  • Vinyl-Impregnated Cloth (7)
  • Weather-Resistant Nylon 6.6 (16)
  • Zamac Alloy (10)
  • Zinc (7)
  • Show More...

• Sub Brand

  

  • 3M(R) (7)
  • 3M(TM) (17)
  • B-Cap(R) (8)
  • Blackburn (20)
  • Burndy (24)
  • CADDY (36)
  • DYMO (5)
  • Easy Wrap(TM) (2)
  • Easy-Splice(TM) (5)
  • Entrelec (8)
  • E-Z-CODE ID (5)
  • Greenie(R) (2)
  • Ideal (8)
  • In-Sure(R) (7)
  • NSI (21)
  • Panduit Corp (2)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Powerplug(R) (2)
  • Scotch(R) (7)
  • Scotchcast (3)
  • Temflex(TM) (8)
  • Twister(R) (7)
  • Type HSTT (3)
  • Wing-Nut(R) (7)
  • WingTwist(TM) (2)
  • Wire-Nut(R) (6)
  • WireTwist(TM) (6)
  • Show More...

• Color

  

  • Aluminum (3)
  • Black (164)
  • Black on White (8)
  • Blue (34)
  • Blue/Gray (2)
  • Bronze (2)
  • Brown (32)
  • Chromated steel (2)
  • Clear (18)
  • Colorless (4)
  • Gray (36)
  • Gray 0 (4)
  • Green (20)
  • GREEN/YELLOW (1)
  • Grey (8)
  • Ivory (23)
  • Matte Black Finish (2)
  • Natural (20)
  • OLIVE (2)
  • Orange (21)
  • Pink (12)
  • Purple (12)
  • Red (43)
  • Red/Tan (3)
  • RUBY (2)
  • Silver (6)
  • Stainless (3)
  • Tan (8)
  • Tin Plated Copper (3)
  • Violet (3)
  • White (62)
  • WHITE GLOSS (1)
  • Yellow (28)
  • Show More...

• Number Of Pieces

  

  • 100 (3)
  • 101 (1)
  • 20 (2)
  • 201 (7)
  • 50 (8)
  • Show More...

• Length

  

  • 0.5 in (2)
  • 0.6 in (2)
  • 0.75 in (2)
  • 1 (40)
  • 1 in (13)
  • 1.125 in;28.58 mm (2)
  • 1.37 in (4)
  • 1.38;34.9 mm (2)
  • 1.5 (2)
  • 1.5 m (3)
  • 1.5 Meter (2)
  • 1.85 (4)
  • 1/2 (8)
  • 1/2 in (17)
  • 10 (3)
  • 10.9 (2)
  • 100 (14)
  • 100 ft (2)
  • 1000 (2)
  • 11.08 in;284.4 mm (2)
  • 11.1 in;282 mm (2)
  • 11.3 (2)
  • 11.5 (2)
  • 11.6 (3)
  • 11.77 in;299 mm (2)
  • 11.8 (8)
  • 1-1/16 INCH (4)
  • 1-1/2 (29)
  • 1-1/2 in (4)
  • 1-1/2 INCH (1)
  • 1-1/4 (29)
  • 1-1/4 in (4)
  • 1-1/8 (4)
  • 11-1/2 Foot (2)
  • 11-1/2 ft (2)
  • 12 ft (2)
  • 120 (2)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 (6)
  • 1-3/4 (2)
  • 1-3/8 in (2)
  • 14 (3)
  • 14.2 (7)
  • 14.2 in;360.5 mm (2)
  • 14.287 in;362.9 mm (2)
  • 14.3 (5)
  • 14.5 (5)
  • 14.57 (5)
  • 14.6 in;371 mm (2)
  • 14.655 in;372.24 mm (2)
  • 14.9 (4)
  • 14.96 (2)
  • 15.1 (3)
  • 1-5/16 INCH (1)
  • 1-5/8 (3)
  • 16 Foot (3)
  • 18 in;457 mm (2)
  • 18.1 (2)
  • 2 (17)
  • 2 in (15)
  • 2.5 in (2)
  • 20.5 (2)
  • 200 (2)
  • 2-1/2 (9)
  • 2-1/2 in (2)
  • 2-1/4 (3)
  • 23.62 (2)
  • 2-3/4 (4)
  • 3 (6)
  • 3 in (9)
  • 3.6 (5)
  • 3.62 in;91.95 mm (2)
  • 3.94 (5)
  • 3.94 in;100.08 mm (2)
  • 3/4 (29)
  • 3/4 in (5)
  • 3/8 (4)
  • 3/8 in (2)
  • 30 (5)
  • 30 ft;9.1 m (5)
  • 30.7 (3)
  • 3-1/2 (3)
  • 3-1/4 (3)
  • 3-3/4 (2)
  • 4 (15)
  • 4 ft (9)
  • 4 ft;1.2 m (3)
  • 4.5 (4)
  • 400 (2)
  • 4-1/2 (2)
  • 48 in;121.9 mm (5)
  • 5 (6)
  • 5.4 (6)
  • 5.51 (2)
  • 5.51 in;140 mm (2)
  • 50 (3)
  • 5-1/2 in (4)
  • 6 (3)
  • 6 INCH (1)
  • 6.1 (4)
  • 6.1 in (2)
  • 6.5 (2)
  • 60 (22)
  • 60 ft (4)
  • 66 (12)
  • 66 ft (2)
  • 66 ft;20.1168 m (2)
  • 7.2 (7)
  • 7.31 in;185.67 mm (2)
  • 7.4 (9)
  • 7.435 in;188.85 mm (2)
  • 7.5 in (2)
  • 7.6 in;193 mm (3)
  • 7.800000000000000 (2)
  • 7.9 (8)
  • 7/8 (4)
  • 75 (2)
  • 8 (14)
  • 8.1 in;205.70 mm (2)
  • 8.2 (2)
  • 8.46 in;215 mm (2)
  • 8.5 (4)
  • 9 (3)
  • 9 in;22.9 mm (2)
  • 9/16 in (2)
  • NA (14)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (3)
  • # 2 AWG (STR) (6)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (4)
  • # 6 AWG (STR) (6)
  • # 8 AWG (STR) (3)
  • #12 to #6 AWG (2)
  • #2 to 4/0 AWG (2)
  • #8 to 1/0 AWG (2)
  • (2) 14 AWG/(2) 12 AWG (2)
  • (2) 14 AWG/(2) 12 AWG (NON METALLIC CABLE) (2)
  • (2) 14 To (3) 10 AWG (3)
  • (3) 6 AWG SERVICE ENTRANCE UTILITY CABLE (1)
  • 0.0625 AWG (2)
  • 1/0 AWG (STR) (5)
  • 1/0 AWG-250 MCM (2)
  • 1/4 in (2)
  • 1-1/2 INCH (1)
  • 12 - 10 (2)
  • 12 AWG, 14 AWG (3)
  • 14 to 2, 12 to 2 (3)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 2/0 AWG (STR) (4)
  • 250 MCM (STR) (3)
  • 3/0 AWG (STR) (5)
  • 3/8 in (2)
  • 350 MCM (STR) (3)
  • 4/0 AWG (STR) (3)
  • 4/0-14 AWG (2)
  • 500 MCM (STR) (5)
  • 600 MCM (STR) (2)
  • 750 MCM (STR) (2)
  • NA (18)
  • Show More...

• Background Color

  

  • Black (14)
  • NSI (3)
  • Orange (6)
  • White (16)
  • Show More...

• Legend Color

  

  • Black (16)
  • Black on White, Clear (2)
  • Non-Smear Black (11)
  • White (12)
  • Show More...

• Bundle Diameter

  

  • 0.0625 in (Minimum);1.59 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);1.75 in (Maximum);44.45 mm (Maximum) (4)
  • 0.0625 in (Minimum);1.59 mm (Minimum);2.0 in (Maximum);50.8 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (4)
  • 0.08 in (Minimum);2 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);1.14 in (Maximum);29 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);3.0 in (Maximum);76 mm (Maximum) (2)
  • 0.138 in (Minimum);3.5 mm (Minimum);1.77 in (Maximum);45 mm (Maximum) (3)
  • 0.138 in (Minimum);3.5 mm (Minimum);4.01 in (Maximum);102 mm (Maximum) (2)
  • 0.236 in (Minimum);6 mm (Minimum);3.54 in (Maximum);90 mm (Maximum) (3)
  • 0.236 in (Minimum);6 mm (Minimum);5.0 in (Maximum);127 mm (Maximum) (2)
  • 0.75 in;19.1 mm (2)
  • 1.25 in (Maximum);31.75 mm (Maximum) (2)
  • 1.25 in;32 mm (2)
  • 1.87 in;47.5 mm (3)
  • 3 in;76.2 mm (2)
  • 4 in;101.6 mm (2)
  • Show More...

• Width

  

  • .75 (33)
  • 0.01 (2)
  • 0.09 (7)
  • 0.09 in;2.29 mm (2)
  • 0.095 in;2.41 mm (2)
  • 0.096 in;2.4 mm (2)
  • 0.1 (3)
  • 0.14 (11)
  • 0.14 in;3.56 mm (4)
  • 0.14 in;3.6 mm (6)
  • 0.14 in;3.71 mm (2)
  • 0.18 (4)
  • 0.18 in;4.6 mm (9)
  • 0.180000000000000 (2)
  • 0.181 (2)
  • 0.184 in;4.67 mm (2)
  • 0.186 in;4.73 mm (6)
  • 0.187000000000000 (2)
  • 0.19 (13)
  • 0.19 in;4.82 mm (2)
  • 0.217 (2)
  • 0.22 in (4)
  • 0.22 in;5.6 mm (2)
  • 0.24 (4)
  • 0.27 (5)
  • 0.27 in;7.0 mm (7)
  • 0.3 (6)
  • 0.30 in;7.62 mm (4)
  • 0.305 (2)
  • 0.34 (3)
  • 0.345 in;8.76 mm (2)
  • 0.5 (2)
  • 0.5 INCH (1)
  • 0.75 (7)
  • 0.75 in (3)
  • 0.75 INCH (1)
  • 1 (14)
  • 1 in (2)
  • 1 in;25.4 mm (2)
  • 1 INCH (1)
  • 1.5 (4)
  • 1.75 (3)
  • 1/2 INCH (4)
  • 1/4 in (5)
  • 1-1/8 (4)
  • 19/32 INCH (4)
  • 2 (13)
  • 2 in (2)
  • 2-1/4 (2)
  • 28.58 mm;1.125 in (3)
  • 3 in (4)
  • 3.0 (2)
  • 3.5 in (2)
  • 3/4 (2)
  • 3/4 in (11)
  • 3/4 in;19 mm (8)
  • 3/4 INCH (2)
  • 5/16 in (9)
  • 7 (2)
  • 7/16 in (6)
  • 9/16 in (5)
  • NA (38)
  • Show More...

• Backing Material

  

  • Ethylene Propylene Rubber (6)
  • NSI (5)
  • Plasticized Polyvinyl Chloride (PVC) (32)
  • Polyvinyl Chloride (2)
  • PVC (7)
  • Vinyl Impregnated Cloth Film (4)
  • Show More...

• Adhesion Strength

  

  • 16 (11)
  • 20 (2)
  • 20 to 30 lb/in (Steel);8 to 14 lb/in (Backing) (4)
  • 22 (10)
  • 33.2 (11)
  • Show More...

• Tensile Strength

  

  • 11 (2)
  • 120 (30)
  • 120 lb/530 N (7)
  • 120 lb/534 N (4)
  • 15 (11)
  • 1500 psi (2)
  • 17 (10)
  • 17 lb/in (4)
  • 175 (3)
  • 175 lb/778 N (2)
  • 18 (20)
  • 18 lb/80 N (4)
  • 18 lb;8.165 kg (3)
  • 19.8 (11)
  • 200 (4)
  • 2400 psi (17)
  • 250 (7)
  • 30 (3)
  • 30 lb/135 N (5)
  • 333.6 (3)
  • 40 (25)
  • 40 lb (2)
  • 40 lb/178 N (8)
  • 42 lb/in (4)
  • 450 (2)
  • 450;2002 (2)
  • 50 (57)
  • 50 lb/220 N (8)
  • 50 lb/222 N (4)
  • 50 lb;220 Nm;22.68 kg (7)
  • 50;222 (4)
  • 7.5 lb/in (3)
  • Show More...

• Legend

  

  • (Blank) (3)
  • 0 - 9, t1, t2, t3, l1, l2, l3 (2)
  • 0 to 9 (2)
  • 0-9 (3)
  • 120 VOLTS (1)
  • 120/208V (2)
  • 1-45 (3)
  • 240 VOLTS (1)
  • 277/480V (1)
  • 46-90 (2)
  • 480 Volts (2)
  • DO NOT OPERATE (1)
  • Show More...

• Language

  

  • English (4)
  • No Text (2)
  • Show More...

• Finish

  

  • Anodized (2)
  • Black Annealed (2)
  • Black Oxide (2)
  • Caddy?® Armour (13)
  • CADDY® ARMOUR (4)
  • Ceramic Coated (3)
  • Ceramic Coated Blue (2)
  • Electro Galvanized (3)
  • Electro-galvanized (4)
  • EPDM Rubber Insulated (8)
  • Galvanic/Electrolytic Zinc Plated (3)
  • Galvanized (4)
  • Graphite Metallic (12)
  • Green (3)
  • Matte (22)
  • Plain (4)
  • Plastisol (2)
  • Plastisol Insulated (81)
  • Pre-Galvanized (9)
  • STAINLESS STEEL (1)
  • Thermoplastic (3)
  • Tin Plated (55)
  • Tin Plated Bronze (18)
  • Tin-Plated (12)
  • Untreated (3)
  • white (2)
  • YELLOW (1)
  • Yellow Zinc (8)
  • Yellow Zinc Plated (4)
  • Zinc Phosphate (23)
  • Zinc Plated (240)
  • Zinc-Plated, Tin-Plated Steel Sleeves (2)
  • Show More...

• Thickness

  

  • .007 (32)
  • 0.007 in (2)
  • 0.01 (2)
  • 0.02 (2)
  • 0.02 in;0.51 mm (2)
  • 0.025 (7)
  • 0.025 in (2)
  • 0.025 in;0.64 mm (5)
  • 0.03 (2)
  • 0.03 in;0.75 mm (2)
  • 0.035 (3)
  • 0.04 (24)
  • 0.04 INCH (1)
  • 0.040000000000000 (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.047 (2)
  • 0.05 (44)
  • 0.05 in;1.2 mm (6)
  • 0.05 in;1.3 mm (8)
  • 0.05 in;1.31 mm (4)
  • 0.052 (2)
  • 0.052000000000000 (2)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.06 (34)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.07 (14)
  • 0.075 in;1.91 mm (4)
  • 0.08 (14)
  • 0.085 in;2.15 mm (2)
  • 0.09 (2)
  • 0.5 mil (3)
  • 0.5 Millimeter (2)
  • 057 (2)
  • 1/16 (7)
  • 1/4 in (2)
  • 10 mil;0.25 mm (5)
  • 20 (2)
  • 22 (2)
  • 3/32 (3)
  • 3/64 (3)
  • 30 (3)
  • 30 mil (3)
  • 30 mil;0.76 mm (3)
  • 7 mil (6)
  • Show More...

• Additional Information

  

  • Drc Model (2)
  • Elongation Rate 22.5 (2)
  • Number of Conductors 2 (2)
  • RoHS Compliant; Thickness 0.0065 Inch; Finish Matte; Temperature Rating -40 to 194 Deg F; Approval UL, CSA (3)
  • RoHS Compliant; Tube Width 1/2 Inch; Applicable Standard MIL-M-81531, MIL-STD-202G, SAE-DTL-23053/5 (2)
  • RoHS Compliant; Tube Width 1/4 Inch; Applicable Standard MIL-M-81531, MIL-STD-202G, SAE-DTL-23053/5 (2)
  • RoHS Compliant; Used On Rhino 6000 Dynamometer; Applicable Standard UL 969, ANSI, OSHA, ISO (4)
  • STANDARD PACKAGE 5 PER CASE (1)
  • Tie Wire is Used for Many Purposes, Among them Tying Down PVC Conduit in Trenches Before Pouring Concrete, as well as Drop Ceiling Applications (2)
  • Show More...

• For Use With

  

  • 1-Ballast Fixture New Installations and Retrofits (2)
  • Acoustical;Ceiling and Partitioning;Datacom and Low Voltage;Electrical;Fire Sprinkler;HVAC;Plumbing and Refrigeration (2)
  • Air Handling Space (4)
  • Air Handling Space;Outdoor (5)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Brick;Concrete (2)
  • Concrete;Block;Brick;Stone;Light Duty Work (3)
  • Copper Cables;Aluminum Cables (6)
  • Copper Wire (3)
  • Datacom and Low Voltage;Electrical (4)
  • Datacom and Low Voltage;Electrical;HVAC;Plumbing and Refrigeration (2)
  • Fasteners;Conduit Fasteners (5)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Gas or Electric Heating Device (2)
  • Greater than 2000 Volts Consult Cable (3)
  • Overhead Tension Connection (2)
  • Poured Concrete;Prestressed Concrete;Cinder Block;Brick;Mortar (3)
  • Soft Concrete (4)
  • Standard Conductors (5)
  • Terminate;Splice;Tap Power Connectors (18)
  • Wire Termination (11)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Wireless Network: Infrastructure Accessories (2)
  • Show More...

• Package Quantity

  

  • 1 (2)
  • 1 BG;5 CT (4)
  • 1 ct (26)
  • 1 CT;10 PK (9)
  • 1 CT;100 PK (8)
  • 1 CT;12 PK (2)
  • 1 CT;150 PK (2)
  • 1 CT;25 PK (4)
  • 1 CT;3 PK (2)
  • 1 CT;5 PK (13)
  • 1 CT;6 Pk (3)
  • 1 PK (5)
  • 1 PK;100 CT (2)
  • 1 RL/CT;24 RL/CA (2)
  • 10 CT (5)
  • 10 CT;240 PK (4)
  • 10 CT;50 PK (2)
  • 10 PK (10)
  • 10 RL/CA;100 RL/CA (3)
  • 100 BG (12)
  • 100 BX (31)
  • 100 BX;5000 CA (2)
  • 100 CT (84)
  • 100 CT;1000 PK (2)
  • 100 CT;500 PK (5)
  • 100 CT;800 PK (5)
  • 100 PC (2)
  • 100 PK (15)
  • 100 PK;500 CT (5)
  • 100 PK;600 CT (6)
  • 100 RL/CA (2)
  • 1000 CT (2)
  • 1000 PK;100 CT (4)
  • 10000 PK;100 CT (3)
  • 10000 PK;1000 CT (8)
  • 12 CA (6)
  • 12 CT (8)
  • 12 PK (2)
  • 1800 CT (2)
  • 2 CT (5)
  • 20 PK (3)
  • 200 CT (2)
  • 200 JR (3)
  • 240 CT (2)
  • 25 BG (2)
  • 25 BX (2)
  • 25 CA (2)
  • 25 CT (13)
  • 25 CT;125 PK (2)
  • 25 PK (2)
  • 250 CT (3)
  • 25000 PK;100 CT (3)
  • 3 CT (6)
  • 4 CT (6)
  • 400 JR (2)
  • 50 BG (2)
  • 50 BX (6)
  • 50 CT (22)
  • 50 PK (4)
  • 50 PK;300 CT (6)
  • 500 BG (7)
  • 500 BX (4)
  • 500 CT (8)
  • 500 CT;5000 PK (3)
  • 500 JR (4)
  • 500 PK (4)
  • 500 PK;50 CT (7)
  • 5000 BC (3)
  • 5000 PK;100 CT (16)
  • 5000 PK;1000 CT (2)
  • 6 CT (19)
  • Show More...

• Weight

  

  • 0.0006 lb (3)
  • 0.001 lb (2)
  • 0.002 lb (2)
  • 0.0025 lb (3)
  • 0.0037 lb (3)
  • 0.004 lb (4)
  • 0.005 lb (11)
  • 0.0056 lb (2)
  • 0.006 lb (2)
  • 0.0062 lb (2)
  • 0.01 lb (81)
  • 0.01 LB (Each) (2)
  • 0.011 lb (2)
  • 0.02 lb (25)
  • 0.02 lb/EA (5)
  • 0.03 lb (14)
  • 0.03 lb/EA (4)
  • 0.04 lb (9)
  • 0.04 lb/EA (5)
  • 0.05 lb (7)
  • 0.05 lb/EA (8)
  • 0.06 lb (5)
  • 0.06 lb/EA (6)
  • 0.07 lb (7)
  • 0.08 lb (2)
  • 0.08 lb/EA (7)
  • 0.09 lb (7)
  • 0.09 lb/EA (4)
  • 0.1 lb (2)
  • 0.1 lb/EA (4)
  • 0.10 lb/EA (2)
  • 0.11 lb (2)
  • 0.12 lb/EA (4)
  • 0.13 lb (3)
  • 0.13 lb/EA (9)
  • 0.14 lb/EA (2)
  • 0.15 lb (4)
  • 0.15 lb/EA (2)
  • 0.16 lb (2)
  • 0.17 lb (2)
  • 0.17 lb/EA (2)
  • 0.18 lb (2)
  • 0.19 lb (5)
  • 0.19 lb/EA (5)
  • 0.2 lb (5)
  • 0.21 lb (3)
  • 0.22 lb (6)
  • 0.23 lb (2)
  • 0.24 lb (3)
  • 0.26 lb (2)
  • 0.26 lb/EA (2)
  • 0.27 lb (2)
  • 0.28 lb (2)
  • 0.28 lb/EA (2)
  • 0.3 lb (2)
  • 0.3 lb/EA (2)
  • 0.31 lb/EA (3)
  • 0.32 lb (2)
  • 0.34 lb (3)
  • 0.37 lb (3)
  • 0.38 lb (2)
  • 0.41 lb (2)
  • 0.41 lb/EA (2)
  • 0.44 lb (2)
  • 0.45 lb (3)
  • 0.45 lb/EA (2)
  • 0.46 lb (2)
  • 0.5 lb (3)
  • 0.56 lb (2)
  • 0.62 lb/EA (2)
  • 0.72 lb (2)
  • 0.75 lb (2)
  • 0.99 lb (2)
  • 1 lb (9)
  • 1 lb/EA (2)
  • 1.04 lb (2)
  • 1.05 lb (2)
  • 10 lb (7)
  • 3.5 lb (2)
  • Show More...

• Special Features

  

  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 8 AWG (STR) - 3/8 Mounting Hole (2)
  • (2) 750-250 MCM - Dual Rated (2)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • 1,000V Maximum In Fixtures And Signs;Better Grip And More Leverage For Faster Connections With Less Effort;Comfortable Swept Wings Designed To Help Reduce Hand Fatigue;Comply With Federal Specification W-S-610E;Expanding Square-Wire Spring Provides A Secure Connection Every Time;Features: The Widest Red/Tan Wire Range In The Industry;Min. 2 #18 To Max. 4 #10;Model Number: 344;Suregrip Overmolding Provides Better Grip For Improved Leverage And More Torque;Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 D (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT51;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT52;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (2)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (2)
  • 3m Clear Tubing Fp-301 Provides Excellent Visibility For Component Packing;Split Resistant (9)
  • 500 MCM (STR) - 1/2 Mounting Hole (2)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Abrasion Resistant;Fire and Chemical Resistant (3)
  • Abrasion Resistant;Oil Resistant (2)
  • Accepts (2) 14 To (4) 10 AWG MC/AC Cable, 5/16 In and 3/8 In Flexible Conduit (2)
  • Accomodates Stranded cable, With Inspection window, Long barrel (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 1-3/4 IN;Vinyl-Impregnated Cloth Construction Provid (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 3/4 IN;Vinyl-Impregnated Cloth Construction Provides (4)
  • Adjustable mud ring accommodates various thicknesses of drywall. Can be adjusted after the installation of drywall (2)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Bright, colorful signs identify potentially hazardous work areas;Protected graphics for indoor and outdoor use;Resistant to both chemicals and abrasion (2)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • CLIP,CONDUIT, (4)
  • Color Coding (13)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Prefilled with Oxide Inhibitor to prevent oxidation and keep out moisture. All Splices are color coded and marked with strip lengths, installation die codes and compression locations, providing easy identification for easy installation (11)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (7)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (68)
  • Convenient Pocket-Size Booklets;Plastic-Impregnated Cloth Construction for Long-Lasting Durability;Resists Abrasion, Moisture, Dirt and Oil;Perforated 1-1/2 in Markers can be Separated into Half-Length Sizes;Self-Sticking on Wire and Cable;For Above Ground;Below Ground (2)
  • Corrosion Resistant (3)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Detectable by metal detectors, X-ray equipment, or visual detection (6)
  • Drop wire may be cut to exact length for adjustments in drop wire sag. Can be attached to bare neutral at any point in the span. Flexible and rigid bails grip ACSR, AAC and AAAC Conductors (3)
  • Dual Rated For Use With Copper And Aluminum Cable (3)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (2)
  • Electro-Tin Plated (3)
  • Eliminates errors in premounting the base with respect to its orientation to wire bundle direction (3)
  • Excellent Adhesion and Elasticity, All Weather Performance, High Tensile Strength, Resistant to UV, Abrasion and Corrosion, Flae-Retardant. (10)
  • Exceptional Wire-Range Capacity Three Models Handle Wire Combinations From as Small as 22 AWG to as Large as 6 AWG (4)
  • Extremely Flexible with Good Adhesion and Conformability (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (3)
  • Features: 12 Gauge Steel, Rust Inhibitor, Finger Friendly (5)
  • Features: 16 1/2 Gauge, 400 FT (3-1/2#), Black Annealed or Galvanized (2)
  • Features: All Splicer/Reducers Are Dual Rated For Use With Aluminum And Copper Conductors And Are Constructed From High Strength, Tin Plated Aluminum, PENTROX Oxide Inhibiting Joint Compounds Are Recommended For All Aluminum Applications, All Connectors Are Tin-Plated: Provide Low Contact Resistance And Prevents Galvanic Corrosion, Connectors Feature Rounded Bottoms: Facilitates Taping, Solid Center Barrier: Prevents Contact Of Dissimilar Metals, Large Screw Diameters: Ensures Greater Surface Contact With (2)
  • Features: Better Shear Resistance than Plastic Pin, Zamac Alloy with Carbon Steel Screw Drive, Fast and Easy to Install (5)
  • Features: Continuous Thread Allows for Take up Adjustment, Machine Bolt (18)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 10 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Corrosion and Chemical Resistant (6)
  • Features: Corrosion Resistant, Stainless can be Mildly Magnetic (2)
  • Features: Drive Pins are Installed with a Stud Driver (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: Easy to Spot, Reusable, Deep Threads (7)
  • Features: For Machine Screws Anchors (3)
  • Features: General Purpose Cable Tie For Every Day Bundling And Cable Management;UL Recognized (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (2)
  • Features: Includes Drill, Hex Head Slotted (5)
  • Features: Invincibox upto 2 Inch (67)
  • Features: Invincibox upto 2 Inch, Tuff Pack (4)
  • Features: It will not Corrode, Harder than Brass and has a High Resistance to Extreme Temperatures (2)
  • Features: Lag Screws are used in Woodworking when Standard Wood Screws are too Short or too Small (24)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Invincibox Up to 2 IN (6)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Silicon Bronze is High Resistance to Extreme Temperatures, Invincibox Up to 2 IN (2)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Stainless Steel is Corrosion and Chemical Resistant, Invincibox Up to 2 IN (3)
  • Features: Made Of Tin-Plated Cast Copper Alloy, It Accommodates Either One Or Two Conductors, Copper Or Aluminum Cable, In Addition To A Low Profile Head With A Deep Phillips Recess, The Galvanized Steel Bolt Has A Ribbed Neck Which Prevents Rotation During Installation When Installed In A 0.44 Diameter Hole, When Used On Aluminum Conductor, The Cable Must Be Scratch Brushed And PENETROX A Joint Compound Must Be Used On Cable And Connector, UL467 Listed For Copper Conductor Only, Suitable For Direct Burial (3)
  • Features: Manufactured with Filtered Nylon 6/6, Angled Tail, One Piece Design, Transition Rails, And 3 Tooth Pawl, Rounded Edges, Finger Grips, Bulk Available (2)
  • Features: Medium Duty, Any Head Style Screw can be Used, The Screw can be Easily Removed or Loosened and Retightened (2)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch (3)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch, Tuff Pack (3)
  • Features: Mushroom Head Provides a Large Bearing Surface (12)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Partial Thread, Corrosion Resistant (12)
  • Features: Phillips Socket Driver with One #2 & One #3 Phillips Bit, 1/4 IN Hex Socket Driver, 5/16 IN Hex Socket Driver & Allen Wrench (2)
  • Features: Range-Taking Connector: Lowers Inventory Requirements, Compact Size: Easy To Tape And Insulate Connection, Manufactured From High Conductivity Wrought Copper: Provides Low Resistance And Excellent Electrical Conductivity, Economical: Provides Low Installed Cost, 8A - Use CRIMPITS Accommodating 6 Stranded Copper, 6A - Use CRIMPITS Accommodating 4 Stranded Copper, 4A - Use CRIMPITS Accommodating 2 Stranded Copper, 2A - Use CRIMPITS Accommodating 1/0 And 2/0 Copper, Use PUADP-1 Adapter When Using U (2)
  • Features: Self Drilling (3)
  • Features: Self Drilling, Invincibox Up to 2 Inch (9)
  • Features: Self Drilling, Invincibox Up to 2 Inch, Tuff Pack (17)
  • Features: Self Piercing, Self Tapping (7)
  • Features: Self-Drilling (4)
  • Features: Self-Sticking On Wire And Cable; Perforated 1/4 IN X 1-1/2 IN Markers; For Applications Above Or Below Ground; Resists Abrasion, Moisture, Dirt And Oil; Non-Smear Black Legend Ensures High Visibility; 10 Pages Per Booklet; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Self-Tapping, Bottom Mount (2)
  • Features: Silicon Bronze Harder than Brass used in Direct Burial (3)
  • Features: Silicon Bronze Harder than Brass, Marine use and High Resistance to Extreme Temperatures (4)
  • Features: The INSULUG Type YAEV-L Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Te (2)
  • Features: The Pre-Lubricated Tape Will Reduce Friction Levels And Eliminate Duct, Cutting A Common Issue With Conventional Polyester Ropes Rubbing Against Conduit Walls, Lower Elongation Reduces Pulling Time, Improves Safety For Workers, And Prevents Crus (2)
  • Features: The Type SP VINYLINK Is A PVC Insulated Seamless Butt Splice, Type SP VINYLINK Is Designed To Accommodate A Broad Range Of 600 Volt Cables, Manufactured From Seamless Electrolytic Copper Tubing: Provides Maximum Conductivity And Tensile Strength, In A High Quality Design With NO Seams To Split, Funnel Entry: Provides Easy Wire Insertion, Electro-Tin Plated: Provides Durable Long Lasting Resistance To Corrosion, Expanded Insulation Support: Lower Inventory Requirements, Red Wire Range Of 22-16: Lo (3)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (4)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: Unique, One-Step Drive Anchor, Zamac Alloy with Carbon Steel Screw Drive, Removable Screw (4)
  • Features: Use With Service Entrance Cable And Conduit; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails (3)
  • Features: Use With Wider Cable Such As ROMEX, NM And UF; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails (3)
  • Features: Use With Wider Cable Such As ROMEX, NM And UF; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails; Nail Type: Standard (2)
  • Features: Use With Wider Cable Such As ROMEX® , NM And UF; High-Grade Carbon Steel Construction; Sharp Point Legs Drive Straight Without Splitting Wood; Resist Rust And Corrosion (7)
  • Features: Used to Couple Threaded Rod for Extended Lengths (5)
  • Features: Used to Grounding Pigtails (3)
  • Features: Water-Tight Seal (2)
  • Features: Wedge Anchors can be Installed through the Fixture, Full Thread (12)
  • Features: Wood Rocket, Invincibox Up to 2 Inch (7)
  • Features: Wood Rocket, Invincibox Up to 2 Inch, Tuff Pack (5)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Finished hex nuts are heavier (thicker) and are furnished in sizes 1/4 IN and up;Invincibox up to 1/2 IN;Zinc plated - general use (6)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Square-Wire Spring Creates its Own Threads Maintains a Secure Positive Grip That Will Not Relax Over Time (6)
  • Flexible, Polyolefin (17)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Good Ahesion and Elasticity, All Weather Performance, Great Tensile Strength, Resistant Tto UV, Abrasion and Corrosion, Falme-Retardant. (11)
  • Harsh (7)
  • Heat Shrink (11)
  • Heavy-Wall Cable Sleeve;For Electrical Splices;Connections;For Indoor, Outdoor or Overhead Use;Direct Buried or Submersible;Insulating Secondary Splices;Relocation of Service;Dig-In Repairs;Sheath Repairs (8)
  • Helps prevent mistakes and trial and error searching during electrical service work (3)
  • Helps reduce drop wires by up to 66% (2)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • Hex machine screw nuts are for screws smaller than 1/4 IN diameter;Invincibox up to 1/2 IN;Zinc plated - general use (4)
  • Horizontal markings (3)
  • Indoor (23)
  • Indoor/Outdoor (32)
  • Industrial-Strength Tear-Proof Adhesive Resists Moisture, Extreme Temperatures (4)
  • Invincibox up to 1/2 IN;Steel - general use (6)
  • It has Excellent Resistance to Abrasion, Moisture, Alkalies, Acid, Copper Corrosion and Varying Weather Conditions (4)
  • Long Barrel;High Conductivity (11)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (53)
  • Made of High Copper Alloy;Re-usable (3)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (3)
  • Marked with Die Index and Color Coded (2)
  • Meets Cec and Nec Code Changes For Non-Residential Fluorescent Luminaires With Ballasts;Perfect For Oem or Retrofit Lighting Applications;Patented Push-In Technology Quickly Locks Wires In Place;Passes UL 2459 & CSA 182.3 Finger Probe Requirements;Fits Through 1/2 In. Knockout;Pieces Pull Apart Safely and Easily;3/8 In. Strip Length Indicator;Thumb Ridges Provide Superior Grip;Model:102 (2)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • One-piece molding - no lost parts (2)
  • Perfect for coaxial, fiber optic and all other communication and electrical conducting cables (2)
  • Perfect for wire and cable. Print heat-shrink sleeves on the spot (3)
  • Plenum (40)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Premium (2)
  • Pre-printed (12)
  • Provides an Excellent Thermal Dissipation of Splice Heat (3)
  • provides excellent thermal dissipation of splice heat (2)
  • Rigid (2)
  • Self Laminating & Wrap Around (4)
  • Self Sticking Safety Signs have a 5 to 8 year Durability (2)
  • Self-Sticking on Wire and Cable;For applications above or below ground;Resists Abrasion, Moisture, Dirt and Oil;Non-smear Black Legend Ensures High Visibility;For Above Ground;Below Ground (2)
  • Specially Designed Contour Wings Provide a Secure Grip for Extra Levarage (7)
  • Standard Barrel;High Conductivity (2)
  • Static Load Capacity 100 Lb (Vertical), 25 Lb (Horizontal), Clearance Hole For 1/4 In Bolt (3)
  • Static Load Capacity 160 Lb (2)
  • Static Load Capacity 25 Lb (4)
  • Static Load Capacity 50 Lb (Vertical), 25 Lb (Horizontal), Attaches To 1/8 To 3/8 In Flanges, #12 Wire To 1/4 In Plain/Threaded Rod (2)
  • Suitable for Damp Locations (2)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • Superior Adhesion and Elasticity, Extreme Weather Performance, Excellent Tensile Strength, Highly Resistant to UV, Abrasion and Corrosion. (12)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • Thickness 1/4 In, Weight 11.6 Lb per 100 (2)
  • Thickness 1/4 In, Weight 11.9 Lb per 100 (2)
  • Thickness 3/8 In, Weight 13.1 Lb per 100 (2)
  • Three splices (3)
  • Two Breakouts (3)
  • Vertical markings (4)
  • Without Spring, Thickness 1/2 In, Weight 11.6 Lb per 100 (3)
  • Without Spring, Thickness 3/8 In, Weight 9.3 Lb per 100 (2)
  • Write-on (2)
  • Show More...

• Application

  

  • "Moisture sealing and physical protection for cables, pipes or other cylindrical objects" (4)
  • (1) Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; (2) Highly Flexible Open Weave will not Trap Heat or Humidity; (3) Allows for Use with Irregular Shapes (2)
  • BALL-TYPE SWIVEL FIXTURE COVERS FOR PENDANT MOUNTED FIXTURES (2)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Brick, Concrete (2)
  • Brick, Concrete, Mortar, Wood (24)
  • Cable and Wire Marking, General and Industrial Identification, Laboratory Identification, Panel Labeling, Voice and Data Identification (3)
  • Cable Bundling (7)
  • Cable Tie Entry from All Four Sides, Used with Miniature, and Intermediate Cables Ties;Indoor (2)
  • Cable ties are primarily used to cinch wires and cables together to form a neat and organized bundle (12)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (18)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (11)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - O (2)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (6)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (7)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsDatacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketGeneration - Renewable Energy - Alternative EnergyInd Facilities & Factories - Industrial Facilities/Factories - OtherOther IT and Datacom - Other InfrastructuresWater and Wastewater Systems - Water and Wastewater Systems - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (3)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • Concrete, Block, Brick, Stone (4)
  • Concrete, Block, Brick, Stone, Light Duty Work (5)
  • Concrete, Pipe Hanging, Conduit, Eye Rod, Cable Trays, Lighting Systems, Strut Channels, Overhead Utilities, Sprinkler Systems, Drop Ceilings, HVAC Duct, Electrical, Refrigeration (6)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction;Industrial;Military (9)
  • Covers wire and cable to protect from abrasion (5)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (15)
  • Dead-End Self-supporting Drop Wire (3)
  • Drop Ceiling (2)
  • Drywall, Concrete, Brick, Block (3)
  • Drywall, Particle Board, Wood (12)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (12)
  • Electrical (8)
  • Electrical Fixing and Fastening (3)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (7)
  • Electrical Labeling;Wire and Cable Labeling (11)
  • Fastens to surface with a hammer. (2)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For Aluminum And Copper Conductors (13)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (2)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (6)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Device Grounding Applications (2)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (5)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Cables (4)
  • For Direct Burial In Earth And Concrete (2)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (6)
  • For Dry Locations;Insulating and protecting wires and cables (15)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For Grounding And Bonding Applications (5)
  • For Indoor And Outdoor Use (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (14)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (2)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Making Tap Or Parallel Copper Connections (2)
  • For Removing Metal And Can Be Used In Heavier Gauge Metals (32)
  • For Service Entrance Cable And Conduit (4)
  • For Standard Conductor Splice (12)
  • For Use With Copper And Aluminum Conductors (4)
  • For use with non-metallic cable (10)
  • For Used To Couple Threaded Rod For Extended Lengths (3)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (19)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (6)
  • General (15)
  • General Purpose (31)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • General Purpose;Indoor;Outdoor;Cable Harnessing;Wire Harnessing (3)
  • General Use (2)
  • Generation - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyInd Facilities & Factories - Facility - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetWater and Wastewater Systems - Water and Wastewater Systems - OtherDatacenters - Datacenters - OtherOther IT and Datacom - Other InfrastructuresUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketResidential Bldgs & Facilities - Residential Bldgs (2)
  • Grounding and Bonding Applications (9)
  • Grounding Wire (2)
  • Harness Multiple Cables Into a Single Manageable Bundle; Allows Breakouts of Single/Multiple Cables; Provides Abrasion Protection for Wire, Cables, Hoses, and Tubing (6)
  • Harsh Environment (6)
  • High Voltage (2)
  • Hollow Walls (12)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Indoor (17)
  • Indoor/Outdoor (3)
  • Indoor;Outdoor (8)
  • Indoor;Used with Miniature, Intermediate, and Standard Cables Ties (6)
  • Industrial (4)
  • Industrial;Labeling Wire;Cable and Rounded Surface (2)
  • Industrials, Hospitals, Utilities, Marine, Computer (2)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (39)
  • Insulating or Joining 2 or more conductors (19)
  • Labeling Wire, Cable and Rounded Surface (2)
  • MARINE (2)
  • Marking Wire and Cable (4)
  • Metal into Concrete (2)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (2)
  • NA (2)
  • NSI (35)
  • Other (14)
  • Outdoor (11)
  • Overhead Tension Connection (2)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (5)
  • Premium (13)
  • Primary Electrical Insulation for Splicing all Solid Dielectric Cables Through 69 kV. (3)
  • Professional;Premium Grade (2)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (5)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (3)
  • Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; Highly Flexible Open Weave will not Trap Heat or Humidity; Allows for Use with Irregular Shapes (4)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherOther IT and Datacom - Other InfrastructuresInd Facilities & Factories - Industrial Facilities/Factories - OtherGeneration - Renewable Energy - Alternative EnergyUtilityWater and Wastewater Systems - Water and Wastewater Systems - O (2)
  • Screws, Bolts, General Use (11)
  • Soft Concrete (4)
  • Splicing Wire (13)
  • Terminate, Splice, Tap Power Connectors (69)
  • To be used for marking SNA terminal blocks (8)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (2)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (4)
  • Used to bundle and secure wire and cable. (2)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Used to Strap or Support Pipe, Ducts & Other Fastening Applications (2)
  • UtilityOther IT and Datacom - Other InfrastructuresGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherGeneration - Conventional Energy - Conventional EnergyCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - Datacenters - OtherCommercial (2)
  • Wire and Cable Labeling (3)
  • Wire Identification (3)
  • Wire Marking (8)
  • Wire Splice (3)
  • Wire Termination (110)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (69)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (8)
  • BOX SUPPORT (19)
  • CABLE & PIPE TRANSITS (45)
  • CADDY (STRAPS ONLY) (12)
  • Comp & Mech Lugs and Butt Splices (265)
  • Datacom Wiring Devices and Accessories (18)
  • DISCONNECTS (4)
  • EXOTHERMIC GROUNDING PRODUCTS (2)
  • FASTENERS (35)
  • FUSE BLOCKS,FUSE HOLDERS (2)
  • Fuses & Fuse Accessories (16)
  • HAND TOOLS (18)
  • HEAT/COLD SHRINK (151)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (4)
  • MISC FITTINGS (8)
  • Miscellaneous residential devices (4)
  • Powerdefense Breakers (7)
  • Printers and Labeling (19)
  • SAFETY PRODUCTS (10)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (536)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (89)
  • SPLICE KITS (41)
  • SPLIT BOLTS (97)
  • SPRING NUTS & TWIRL NUTS (10)
  • STEEL BOXES & COVERS (3)
  • T&B C TAP LUGS (14)
  • TAPE (110)
  • TERMINAL BLOCK ACESSORIES (26)
  • TERMINAL BLOCKS POWER DIST BLOCKS (18)
  • TERMINALS (31)
  • WIRE LUBE, MARKERS, & TIES (141)
  • WIRE NUTS (70)
  • Show More...

• Poles

  

  • 1 (106)
  • 3 (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 1k/5k (4)
  • 300 (6)
  • 300 V (4)
  • 300, 400 (2)
  • 35 (11)
  • 35 kV (4)
  • 600 (71)
  • 600 V (182)
  • 600 V ac (8)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (11)
  • 600 Volt (5)
  • IEC 800V, EN 700V, UL 600V (5)
  • NA (10)
  • Show More...

• Minimum Qty

  

  • 10 (2)
  • 100 (195)
  • 1000 (22)
  • 150 (4)
  • 20 (2)
  • 200 (3)
  • 25 (14)
  • 250 (12)
  • 300 (3)
  • 350 (1)
  • 5 (2)
  • 50 (49)
  • 500 (35)
  • 5000 (5)
  • 750 (1)
  • 8000 (1)
  • Show More...

• Stud Size

  

  • #10 (2)
  • 1/2 (48)
  • 1/4 (35)
  • 3/8 (35)
  • 5/16 (6)
  • 5/8 (2)
  • Show More...

• Number Of Conductors

  

  • 1 (35)
  • 10 (2)
  • 12 (2)
  • 2 (81)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 6 (7)
  • 3 (25)
  • 4 (15)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Wire Type

  

  • ALUMINUM/COPPER (4)
  • B,C,D,K,M,I (12)
  • Class B & C (83)
  • COPPER (8)
  • SOLID (1)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • STRANDED (1)
  • Show More...

• Thread Size

  

  • #10 (24)
  • #10-24 (6)
  • #10-32 (8)
  • #12 (11)
  • #14 (5)
  • #6 (13)
  • #6-32 (13)
  • #8 (29)
  • #8-32 (11)
  • 1/2 in - 13 (2)
  • 1/2-13 (10)
  • 1/4 (9)
  • 1/4 in - 20 (2)
  • 1/4-20 (21)
  • 3/8 (6)
  • 3/8 in - 16 (2)
  • 3/8-16 (16)
  • 5/16-18 (2)
  • Show More...

• Insulation Color

  

  • Black (39)
  • Blue (10)
  • Blue (Code) (3)
  • Brown (2)
  • Gray (13)
  • Green (9)
  • Metallic Silver (2)
  • Orange (9)
  • Purple (5)
  • Red (14)
  • Tan (3)
  • Yellow (12)
  • Show More...

• Diameter

  

  • #10 AWG (19)
  • #12 AWG (6)
  • #14 AWG (3)
  • #6 AWG (10)
  • #8 AWG (23)
  • 0.187 in Diameter as Supplied (5)
  • 0.25 - 0.75 (2)
  • 0.25 in Diameter as Supplied (3)
  • 0.38 (2)
  • 1/2 (5)
  • 1/2 in (7)
  • 1/2 in (ID) (2)
  • 1/2 INCH (1)
  • 1/4 (25)
  • 1/4 in (22)
  • 1/4 in (ID) (4)
  • 1/8 (2)
  • 3/16 (4)
  • 3/16 in (3)
  • 3/8 (17)
  • 3/8 in (6)
  • 3/8 in (ID) (5)
  • 5/16 (2)
  • Show More...

• Temperature Rating

  

  • 105 DEG C Shell Rated (11)
  • 105° C (3)
  • 122 (10)
  • 131 TO 275 DEG F (1)
  • 170 (4)
  • 194 (15)
  • 194° F (4)
  • 257 (8)
  • 257 Deg F (5)
  • -40 °F - 158 °F (3)
  • -40 F to 250 F (3)
  • -40 To 180 (7)
  • 90 (4)
  • 90 C (27)
  • Show More...

• Type

  

  • 2- Nail (4)
  • 2 NAIL, INSULATED (2)
  • 2-Wire Standard Version (3)
  • ADHESIVE (5)
  • Aluminum Service Wedge Clamp (3)
  • AMS, Dual Rated (3)
  • Anchor Kit (7)
  • Anchor Setting Tool (3)
  • ATR nut (2)
  • Automatic Tension Splice (2)
  • Bolted Lugs & Terminals (21)
  • Bottom Mount Rod Hanger (2)
  • Bottom Mount Wood Drilling Rod Hanger (2)
  • Bracket fastener (2)
  • Braided Expandable Sleeving (8)
  • Breatout Boot (3)
  • Bridle Rings (2)
  • Bugle Head Wood Rocket Drywall Screw (12)
  • CABLE CLAMP (3)
  • Cable conduit to wire fastener (2)
  • Cable Connector (2)
  • Cable hook to wire and rod fastener (2)
  • Cable Tie (84)
  • Cable Tie Mount (18)
  • Cable/Conduit to Stud (3)
  • Cap Screw (12)
  • Cold Shrink End Cap (4)
  • Cold Shrink Splice (11)
  • Combo nut washer (5)
  • Compression Lug (67)
  • Compression Splice (7)
  • Compression Splice Service Entrance (28)
  • Concrete Bottom Mount Rod Hanger (2)
  • Conduit and Box Support Fastener (6)
  • Conduit and cable support (2)
  • Conduit and Voltage Marker Cards (3)
  • Conduit cable fastener and support (2)
  • Conduit fastener (4)
  • Conduit Locknut (4)
  • Conduit to conduit fastener (3)
  • Conduit to rod fastener (4)
  • Conduit to stud fastener (2)
  • Conduit U-bolt (5)
  • Corrugated Loom Tubing (5)
  • DETECTABLE (6)
  • Direct Burial Splice Kit With Heat Shrink (3)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Drive Pin (2)
  • Extra Heavy Duty (2)
  • Finished Hex Nut (13)
  • FIXTURE HANGERS MALLEABLE (2)
  • Flat Head Wood Screw (2)
  • FLAT WASHER (13)
  • Full Thread Wedge Anchor (14)
  • GAR (16)
  • GAR-BU (2)
  • GB (3)
  • GBM (3)
  • GC (4)
  • GC-CT (3)
  • Gel Tap Splice Kits With Connector (2)
  • GENERAL PURPOSE (13)
  • General Use (2)
  • Ground Machine Screw (3)
  • Hammer-On Flange Clips (2)
  • Hardware & Rough-In (10)
  • HEAT (6)
  • Heat Shrink Label (16)
  • Heat-Shrink (17)
  • HEAVY DUTY (8)
  • Heavy Duty Mounting Cradle (2)
  • Heavy Wall (16)
  • Heavy-Duty Laminated Lockout Tag (2)
  • Hex Head Concrete Anchor System (4)
  • Hex Head Lag Screw (24)
  • Hex Head Tap Bolt (20)
  • Hexagonal Nut Sleeve Anchor (4)
  • HIGH PERFORMANCE (48)
  • IN LINE (2)
  • Inline (6)
  • Inline Splice (5)
  • IN-Line Splicer/Reducer (8)
  • Installation Tool (4)
  • INSULATED (2)
  • Insulating and Splicing (2)
  • Integrated Mounting Hole (5)
  • Intergrated Mounting Hole (3)
  • INTERMEDIATE (4)
  • KC and K2C Series (24)
  • K-Lath Screw (6)
  • KS (4)
  • Label (3)
  • Label Printers and Labels (4)
  • linerless Ethylene Propylene Rubber (5)
  • LOCK WASHER (11)
  • Long Barrel - CU Splice (3)
  • Long Barrel - One Hole (27)
  • Long Barrel - Two Hole (14)
  • Long Barrel, Skive, Tin Plated (3)
  • Long Barrel, Tin Plated (4)
  • Low Voltage Mounting Plates (3)
  • MACHINE SCREW (42)
  • Machine Screw Anchor (2)
  • Machine Screw Hex Nut (4)
  • Mechanical Grounding (11)
  • MINIATURE (4)
  • Molded case circuit breaker accessory (9)
  • Molds (2)
  • Motor Lead Pigtail Splice (2)
  • MOUNTING BASE (10)
  • Mounting Hanger (3)
  • Multi Cable (13)
  • Multi-Purpose, Standard (2)
  • Mushroom Head with Spring Wing (12)
  • NAIL PLATE (2)
  • Natural (5)
  • Natural-Mountable (2)
  • Non-Metallic Cable Splices And Taps (3)
  • Nut (5)
  • nVent CADDY All-in-One Accessories (2)
  • nVent CADDY Cat HP J-Hook System (3)
  • nVent CADDY Speed Link SLK System (3)
  • Offset Entry (3)
  • Pan Head Self Drilling Screw (7)
  • Permanent Acrylic Adhesive (3)
  • PIGTAIL (5)
  • Pigtail Splice (2)
  • Pipe Wrap (2)
  • Plumbers Tape (2)
  • Premise Muletape (2)
  • Premium (12)
  • Premium Cable Tie (17)
  • Pre-printed Books (5)
  • Pre-Printed Wire Marker Book (4)
  • Push-In (11)
  • QT-III (25)
  • Rebar Clamp (2)
  • Rejacketing Sleeve (5)
  • Replacement Sleeves (3)
  • Ring Tongue (4)
  • Rod and wire fastener (7)
  • Rod Coupling (6)
  • Rod/Wire (5)
  • Roll-On Splice Kits (2)
  • ROOF FLASHING (2)
  • Rubber Insulating and Splicing (3)
  • Safety Labels (2)
  • SCREW (1)
  • Select Purpose (10)
  • Self-Laminating Label (5)
  • Self-Sticking Safety Sign (2)
  • Service (3)
  • Sheet Metal Screw (31)
  • Short Barrel - CU Splice (2)
  • Short Barrel - One Hole (2)
  • Side Mount Rod Hanger (2)
  • Single (Thin) Wall (24)
  • Single cable hook (4)
  • Single Sided Entry (22)
  • SLEEVE (12)
  • SP (3)
  • Spiral Wrap (6)
  • Splice Cap (2)
  • Splice Kit (4)
  • Splicing (2)
  • Spring Nut (5)
  • Stable (5)
  • Stainless Steel (4)
  • Standard Barrel - ALCU Splice (6)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Submersible Pedestal Connectors (9)
  • Suspension fastener (2)
  • Tag (2)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (10)
  • Taps (4)
  • T-bar fastener and spacers (2)
  • Terminal Block (21)
  • Terminal Block Accessories (8)
  • Terminal block accessory (5)
  • Terminal blocks (7)
  • Terminals (6)
  • Thermal Transfer Ribbon (2)
  • Thin-Wall Flexible Polyolefin (6)
  • Transformer Lug Kit (2)
  • Twist-On (20)
  • UV Black (3)
  • UV Resistant Black (7)
  • VINYL (18)
  • Voltage And Conduit, Large (3)
  • Voltage And Conduit, Medium (4)
  • Wafer Head Self Drilling Screw (6)
  • Wall Board Kit (7)
  • Washer Head Self Drilling Screw (20)
  • Wire Marker (4)
  • Wire Marker Books (14)
  • Wrap Around Gel Splice Kits (2)
  • Write-On Dispenser with Tape & Pen (4)
  • YAEV-L, Heavy Duty (2)
  • YC-C Series (2)
  • YGF (2)
  • YS, Long Barrel (2)
  • Zamac Anchor (9)
  • Show More...

• Mounting

  

  • 1 (2)
  • 1/2 Mounting Hole (11)
  • 1/2 Mounting Holes (18)
  • 1/4 Mounting Hole (5)
  • 1/4 Mounting Holes (4)
  • 1-1/16 (2)
  • 1-1/2 (2)
  • 1-1/4 (5)
  • 1-1/8 (9)
  • 1-11/16 (3)
  • 1-3/16 (2)
  • 15/16 (6)
  • 1-5/8 (4)
  • 1-7/16 (4)
  • 1-9/16 (6)
  • 2-5/16 (2)
  • 3/4 (2)
  • 3/8 Mounting Hole (11)
  • 5/16 Mounting Hole (4)
  • 5/8 (4)
  • 5/8 Mounting Hole (2)
  • 7/16 (4)
  • 7/8 (6)
  • 9/16 (2)
  • Adhesive (4)
  • Adhesive Tape (11)
  • Bottom Mount (2)
  • CHANNEL (5)
  • DIN RAIL (1)
  • None (28)
  • SCREW (3)
  • Screw-on (8)
  • Self-Adhesive (6)
  • Snap In Mount (2)
  • Wooden Stud (5)
  • Yes (3)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • #26-10 AWG (5)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.38 (3)
  • 1/0-14 AWG (9)
  • 12 (2)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (3)
  • 12-14 AWG (3)
  • 2/0-14 AWG (5)
  • 22 - 10 (6)
  • 250 MCM-6 AWG (13)
  • 3/0-6 AWG (11)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 4-14 AWG (7)
  • 500 MCM-4 AWG (11)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • Show More...

• Size

  

  • #10 (2)
  • #10 X 1 IN (10)
  • #10 X 1/2 IN (3)
  • #10 x 1-1/2 IN (4)
  • #10 x 1-1/4 IN (3)
  • #10 x 2 IN (4)
  • #10 x 3/4 IN (5)
  • #12 x 1 IN (3)
  • #12 x 1-1/2 IN (2)
  • #12 x 1-1/4 IN (2)
  • #12 x 2 IN (2)
  • #12 x 3/4 IN (2)
  • #12;#14 (3)
  • #14 — #10 AWG Code STR, #12 — #10 AWG Code SOL (3)
  • #2 (1)
  • #2 AWG Class B, C, G, H, I, K, M and DLO (3)
  • #2 AWG Class K and M and DLO (2)
  • #2 AWG Code (7)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (4)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (3)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (5)
  • #6 AWG Code (4)
  • #6 x 1 IN (4)
  • #6 x 1-1/2 IN (2)
  • #6 x 1-1/4 IN (2)
  • #6 x 1-1/8 IN (2)
  • #6 x 1-5/8 IN (2)
  • #6 X 2 IN (2)
  • #6-32 x 1-1/4 IN (2)
  • #6-32 x 2 IN (3)
  • #6-32 x 3/4 IN (2)
  • #8 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #8 AWG Code (3)
  • #8 x 1 IN (6)
  • #8 X 1/2 IN (7)
  • #8 x 1-1/2 IN (4)
  • #8 x 1-1/4 IN (8)
  • #8 X 3/4 IN (7)
  • #8-32 X 1 IN (2)
  • #8-32 x 2 IN (2)
  • 0.22 x 1.56 es (3)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 in (3)
  • 1 In Conduit (2)
  • 1.00 x 0.34 (3)
  • 1.00 x 0.44 (2)
  • 1.56 in H x 0.22 in W (2)
  • 1/0 AWG Code (3)
  • 1/2 (5)
  • 1/2 in (14)
  • 1/2 In, 3/4 In (3)
  • 1/2 In-13 TPI (2)
  • 1/2 x 1 (2)
  • 1/2 x 1 in (4)
  • 1/2 x 1-1/2 (2)
  • 1/2 x 1-1/4 (3)
  • 1/2 x 2 (2)
  • 1/2 x 4 (2)
  • 1/4 (7)
  • 1/4 In-20 TPI (2)
  • 1/4 x 1 (5)
  • 1/4 x 1/2 (2)
  • 1/4 X 1-1/2 (7)
  • 1/4 X 1-1/2 IN Marker (11)
  • 1/4 x 1-1/4 (7)
  • 1/4 x 1-3/4 (2)
  • 1/4 X 2 (8)
  • 1/4 x 2-1/2 (2)
  • 1/4 x 2-1/4 (3)
  • 1/4 x 3 (4)
  • 1/4 x 3/4 (4)
  • 1/4 x 3-1/4 (3)
  • 1/4 x 4 (3)
  • 1/4 x 7/8 (2)
  • 1/4-20 x 1 (2)
  • 1/4-20 x 1-1/2 (2)
  • 16 (2)
  • 2 IN x 100 FT (2)
  • 2 INCH (16)
  • 2.00 x 0.34 (2)
  • 2.00 x 0.44 (2)
  • 2/0 AWG Code (4)
  • 2-25/32 inch (12)
  • 250 kcmil Code (2)
  • 3/0 AWG Code (3)
  • 3/16 x 3 (4)
  • 3/16 x 4 (2)
  • 3/4 in (4)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (2)
  • 3/4 IN x 10 FT (2)
  • 3/8 (8)
  • 3/8 in (3)
  • 3/8 In-16 TPI (2)
  • 3/8 x 1 (4)
  • 3/8 x 1/2 (2)
  • 3/8 x 1-1/2 (3)
  • 3/8 x 1-1/4 (3)
  • 3/8 x 2 (2)
  • 3/8 x 2-3/4 (2)
  • 3/8 x 3 (3)
  • 3/8 x 3/4 (3)
  • 3/8 x 4 (2)
  • 350 kcmil Code (2)
  • 4/0 AWG Class B, C, G, H, I, K, M and DLO (2)
  • 4/0 AWG Class K and M and DLO (2)
  • 4/0 AWG Code (4)
  • 5/16 (2)
  • 9/16 in (6)
  • 9/16 x 1-1/4 in (3)
  • H=6.00 - W=3.25 (3)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.840 - W=1.870 - H=1.870 (2)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • NA (4)
  • Premium (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (21)
  • Thickness - 7mil - Length-66' - Width 3/4" (11)
  • Thickness=.030 - Width=.75 - Length=22 feet (2)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (3)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #10 AWG (3)
  • #10 AWG/4 sq.mm (3)
  • #12 AWG (2)
  • #2 AWG (2)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (Stranded) (2)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (6)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded) (2)
  • #6 AWG (8)
  • #8 AWG (2)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (3) #12 AWG (3)
  • (3) #16 AWG (2)
  • (4) #12 AWG (2)
  • (5) #12 AWG (5)
  • 1/0 AWG (6)
  • 1/0 AWG (Stranded) (2)
  • 12 AWG (1)
  • 2/0 AWG (4)
  • 2/0 AWG (Stranded) (3)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (7)
  • 3/0 AWG (7)
  • 350 MCM (4)
  • 500 MCM (8)
  • 600 MCM (1)
  • 750 MCM (2)
  • Show More...