Narrow By:

• Manufacturer: Abb Installation Products, Inc

• Product Type

  

  • 1 1/2INCH Type A LT Conduit 50 Feet (1)
  • 1 1/4IN Type A LT Conduit 100 Feet (1)
  • 1 Gray Duct Cover (1)
  • 1 In Fse 1-Gang WP Box - New Style (1)
  • 1 In Hi/Low Temp LT Conduit 100 FT (1)
  • 1 In Right Angle Pipe Support (1)
  • 1 Inch Blue Ent 750 Reel (1)
  • 1 Inch PVC Conduit Clamp (1)
  • 1 Inch R/G Orange W/Tape (1)
  • 1 Inch Snap-Loc Reducer (1)
  • 1 Inch Type A LT Conduit 100 Feet. (1)
  • 1 White Duct Cover (1)
  • 1.5 Gray Duct Cover (2)
  • 1.5 Inch R/G Orange W/Tape (1)
  • 1.5X1.5 Narrow Slot Gray Duct (1)
  • 1.5X2 Wide Slot Gray Duct (1)
  • 1.5X3 Narrow Slot Gray Duct (1)
  • 1.5X4 Narrow Slot Gray Duct (1)
  • 1/2 In SCH 40 Expansion Coupling (1)
  • 1/2 Inch Ent Coupling (1)
  • 1/2 Inch Male Adapter Snap-In (1)
  • 1/2 Inch Threaded Adapter (1)
  • 1/2INCH Type A LT Conduit 200 Feet (1)
  • 1-1/2 Inch Blue Ent 750 Reel (1)
  • 1-1/2 Inch Box Adapter (1)
  • 1-1/4 Inch Box Adapter (1)
  • 1-1/4IN PVC Conduit Repair Coupling (1)
  • 1-1/4INCH Resi-Gard With Tape 100FT (1)
  • 1-Gang Blank FS Box Cover-Grey (1)
  • 1IN Riser Gard Corr Org 250FT (1)
  • 1-Piece CBL/Pipe CLP 1/2IN STL (1)
  • 1-Piece CBL/Pipe CLP 1-1/2IN STL (1)
  • 1-Piece CBL/Pipe CLP 1-1/4IN STL (1)
  • 1-Piece CBL/Pipe CLP 1IN STL (1)
  • 1-Piece CBL/Pipe CLP 2-1/2IN STL (1)
  • 1-Piece CBL/Pipe CLP 2IN STL (1)
  • 1-Piece CBL/Pipe CLP 3/4IN STL (1)
  • 1X1 Wide Slot Gray Duct Adh (1)
  • 1X2 Narrow Slot Gray Duct (1)
  • 1X2 Narrow Slot White Duct (1)
  • 1X3 Narrow Slot Gray Duct (1)
  • 1X3 Narrow Slot White Duct (1)
  • 1X4 Narrow Slot Gray Duct (1)
  • 2 Inch Blue Ent 500 Reel (1)
  • 2 Inch R/G Orange W/Tape (1)
  • 2 Inch SCH 40 Male Adapter (1)
  • 2 Inch SCH 40 STD 22-1/2 Deg Elbow (1)
  • 2 Inch Type A LT Conduit 50 Feet (1)
  • 2 Inch X 2 Inch Base Spacer (1)
  • 2 Inch X 2 Inch Intermediate Spacer (1)
  • 2 Inch X 3 Inch Base Spacer (1)
  • 2 Inch X 3 Inch Intermediate Spacer (1)
  • 2-Hole CLSD Angl FTG Eg STL (1)
  • 2X2 Narrow Slot Gray Duct (1)
  • 2X3 Narrow Slot Gray Duct (2)
  • 2X3 Wide Slot Gray Duct (1)
  • 2X4 Narrow Slot Gray Duct (1)
  • 3 Gray Duct Cover (1)
  • 3 Inch SCH 40 90 Deg X 36INCH Elbow (1)
  • 3 Inch SCH 40 Expansion Coupling (1)
  • 3 Inch SCH 40 STD 22-1/2 Deg Elbow (1)
  • 3 Inch SCH 80 STD 22.5 Deg Elbow (1)
  • 3 Inch X 3 Inch Base Spacer (1)
  • 3 Inch X 3 Inch Intermediate Spacer (1)
  • 3/4 In Fse 1-Gang WP Box-New Style (1)
  • 3/4 In PVC Conduit Repair Coupling (1)
  • 3/4 In SCH 40 Expansion Coupling (1)
  • 3/4 Inch 1-Gang FSCC Box 18 Cu (1)
  • 3/4 Inch Conduit Fittings N/Met 6FT (1)
  • 3/4 Inch Ent Coupling (1)
  • 3/4 Inch Male Adapter Snap-In (1)
  • 3/4 Inch PVC Conduit Clamp (1)
  • 3/4 Right Angle Pipe Support (1)
  • 3/4INCH Type A LT Conduit 175 Feet (1)
  • 3/8IN X-Flex Liquidtight 100FT Coil (1)
  • 3-Hole Splice PLT LEN5-3/8 Eg STL (1)
  • 3-Hole Splice PLT LEN5-3/8 STL (1)
  • 3X3 Narrow Slot Gray Duct (1)
  • 3X3 Wide Slot Gray Duct (1)
  • 3X4 Narrow Slot Gray Duct (1)
  • 4 In Gray Duct Cover (1)
  • 4 In X 4 In X 2 In Junction B (1)
  • 4 In X 4 In X 4 In Junction Box (1)
  • 4 Inch Polyethylene Plug W/Tab (1)
  • 4 Inch SCH 40 STD 22-1/2 Deg Elbow (1)
  • 4 Inch SCH 80 STD 22.5 Deg Elbow (1)
  • 4 Inch X 3 Inch Base Spacer (1)
  • 4 Inch X 3 Inch Intermediate Spacer (1)
  • 4X4IN Narrow Slot Gray Duct (1)
  • 5-Hole CRN PLT Len 5-3/8IN STL (1)
  • 5-Hole Cross PLT Len/W 5-3/8IN Eg (1)
  • 6 X 6 X 4 In PVC Junction Box 10PK (1)
  • 90 Degree Fitting (2)
  • 90DEG FTG H2.25 L1.625 W1.625 SS (1)
  • 90DEG FTG HT4.125 L1.625 Eg STL (1)
  • 90DEG FTG HT4-1/8IN LEN3-1/2IN SS (1)
  • A1200 Series Internal Joiner (1)
  • Angle Connector (1)
  • Angle Plate Connector (1)
  • Angular Fitting (7)
  • Beam Clamp (5)
  • Beam CLP Base Opng SZ 3in (1)
  • Blank Cover (1)
  • Box Adapter (1)
  • CHNL 12GA 1-5/8X1-5/8 10FT STN STL (1)
  • CHNL 12GA 1-5/8X1-5/8 20FT Eg STL (1)
  • CHNL 12GA 1-5/8X1-5/8 20FT PG STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT Al (1)
  • CHNL 14GA 1-5/8X13/16 10FT Eg STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT HDG STL (1)
  • CHNL 14GA 1-5/8X13/16 20FT Eg STL (1)
  • CHNL 14GA 1-5/8X13/16 20FT PG STL (1)
  • CHNL BK-BK 12GA 1-5/8X1-5/8 10FT Eg (1)
  • CHNL BK-BK 12GA 1-5/8X1-5/8 10FT HD (1)
  • CHNL BK-BK 12GA 1-5/8X1-5/8 20FT Eg (1)
  • CHNL BK-BK 12GA 1-5/8X1-5/8 20FT PG (1)
  • CHNL Nut 3/8-16IN STL (1)
  • CHNL Spring Nut 1/2-13IN STL (1)
  • CHNL SQ Nut 1/2-13IN STL (1)
  • CHNL-Beam CLP 3.5X3.5 B900/905/995 (1)
  • Clamp (3)
  • Coated Conduit (1)
  • Conduit Body (2)
  • Corner Plate (1)
  • CRNR PLT HT 3-1/2IN Len 3-1/2IN STL (1)
  • Cushioned Clamp (1)
  • Cushioned CLP 1/2 In STL (1)
  • End Ball (1)
  • End Cap (2)
  • End Cover (1)
  • Ent Adptr 1IN Blue PC (1)
  • ENT Flexible Raceway (9)
  • Extra HD SLTD RT Ang CHNL 14GA 10' (1)
  • Flat Fitting (1)
  • Flat Tee Plate Fitting (2)
  • Half Slot CHNL BK-BK 12GA 20FT Eg (1)
  • Half Slot CHNL BK-BK 12GA 20FT HDG (1)
  • Half Slot CHNL BK-BK 12GA 20FT PG (1)
  • Half-Slot Channel (17)
  • HD SLTD RT Ang CHNL 14GA 10FT STL (1)
  • Hex Head Cap SCR 3/8X1-1/2 STN-STL (1)
  • Hex Head Cap SCR 3/8X1IN STN-STL (1)
  • HS CHNL 12GA 1-5/8X1-5/8 10FT 316SS (1)
  • HS CHNL 14GA 1-5/8X13/16 10FT HDG (1)
  • HS CHNL 14GA 1-5/8X13/16 10FT STL (1)
  • HS CHNL 14GA 1-5/8X13/16 20FT Eg (1)
  • HS CHNL 14GA 1-5/8X13/16 20FT PG (1)
  • HS CHNL 14GA 1-5/8X1-5/8 10FT Eg (1)
  • HS CHNL 14GA 1-5/8X1-5/8 20FT Eg (1)
  • HS CHNL BK-BK14GA1-5/8X13/16 10FTPG (1)
  • In Standard U Bolt Eg (1)
  • Junction Box (3)
  • LB-Cond Bdy 12CU .75IN Gry PVC (1)
  • LFMC XTMP 1/2IN BLK 30M/100FT (1)
  • LFMC XTMP 1-1/2 BLK 15M/50FT (1)
  • LFMC XTMP 1IN BLK 30M/100FT (1)
  • LFMC XTMP 3/4IN BLK 30M/100FT (1)
  • Meter Riser (2)
  • Mounting Bracket (1)
  • MR O/S 1-1/4IN O/S .758IN PVC 15PK (1)
  • New Work 1G Adj Horizontal Box (1)
  • Pipe Series CLP Size 1-1/2 In Steel (1)
  • Pipe Series CLP Size 1INCH Steel (1)
  • Pipe Series CLP Size 2 In Steel (1)
  • Pipe Series CLP Size 3/4 In Steel (1)
  • Pipe Strap 11GA 3-1/2IN Steel (1)
  • Pipe Strap 11GA 4IN Steel (1)
  • Pipe Strap 12GA 1-1/2IN Steel (1)
  • Pipe Strap 12GA 3IN Steel (1)
  • Pipe Strap 14GA 1/2IN Steel (1)
  • Pipe Strap 14GA 1-1/4IN Steel (1)
  • Pipe Strap 14GA 2IN STL (1)
  • Post Base (2)
  • Pull Elb 1/2IN PVC (1)
  • PVC CTD Cond 1-1/2IN RGD STL Gray (1)
  • PVC CTD Cond 1-1/4IN RGD STL Gray (1)
  • PVC CTD Cond 1IN RGD STL Gray (1)
  • PVC CTD Cond 2IN RGD STL Gray (1)
  • RC Beam CLP Cond SZ 2.5IN Mall Iron (1)
  • RC Beam CLP Cond SZ 2IN Mall Iron (1)
  • RC Beam CLP Cond SZ 3IN Mall Iron (1)
  • RCS Beam OD1.050IN Nom SZ .75IN STL (1)
  • Reg SPR Stud Nut SZ 1/4X1IN STL (1)
  • Reg Spring Nut SZ 1/2IN STN STL (1)
  • Reg Spring Nut SZ 5/16IN STL (1)
  • RGD Cond CLP 1/2IN 14GA Aluminum (1)
  • RGD Cond CLP 1/2IN 14GA HDG Steel (1)
  • RGD Cond CLP 1/2IN 14GA STN-STL (1)
  • RGD Cond CLP 1-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 1-1/2IN 12GA STN-STL (1)
  • RGD Cond CLP 1-1/4IN 14GA Al (1)
  • RGD Cond CLP 1-1/4IN 14GA HDG STL (1)
  • RGD Cond CLP 1-1/4IN 14GA STL (1)
  • RGD Cond CLP 1-1/4IN 14GA STN-STL (1)
  • RGD Cond CLP 1IN 14GA HDG STL (1)
  • RGD Cond CLP 2-1/2IN 12GA Aluminum (1)
  • RGD Cond CLP 2-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 2-1/2IN 12GA Steel (1)
  • RGD Cond CLP 2IN 12GA Aluminum (1)
  • RGD Cond CLP 2IN 12GA STN-STL (1)
  • RGD Cond CLP 3IN 12GA Aluminum (1)
  • RGD Cond CLP 3IN 12GA HDG Steel (1)
  • RGD Cond CLP 3IN 12GA STN-STL (1)
  • RGD Cond CLP 4IN 11GA Aluminum (1)
  • RGD Cond CLP 4IN 11GA HDG Steel (1)
  • RGD Cond CLP 6IN 11GA Eg Steel (1)
  • SLTD CHNL 14GA 1-5/8X13/16 10FT Eg (1)
  • Snap-In Adptr 1IN Blu PC 50PK (1)
  • Splice Plate (1)
  • Spring Channel Nut (1)
  • Spring Nut (6)
  • SQ WSHR 1.5X1.5IN SZ 1/2IN STN-STL (1)
  • SQ WSHR 1.5X1.5IN SZ 3/8IN STN-STL (1)
  • Square Post Base (2)
  • Square Washer (4)
  • Standard Channel (23)
  • STD CPLG 3/4 In X 1-5/8 In PVC (1)
  • STD Hex Nut 1/2 In STN-STL (1)
  • STD Hex Nut 1/4IN STN-STL (1)
  • Steel Channel (2)
  • Strut Loc-King Cobra Clamp 1 In (1)
  • Strut Loc-King Cobra Clamp 3/4 In (1)
  • Strut Strap (18)
  • Strut, 1/4FLATWASHER, SS304 (1)
  • Tee PLT HT 3-1/2IN Len 5-3/8IN HDG (1)
  • Thread Rod (3)
  • Three Hole Corner PLT STN STL (1)
  • Trapnut Strut Fastener 3/8 Silverga (1)
  • U Shape Fittings (1)
  • Univ CLP 14GA SZ 1-1/2IN OD1.738in (1)
  • Univ CLP 14GA SZ 1IN OD1.163IN STL (1)
  • Universal Clamp (6)
  • Universal Cone Nut (3)
  • Upright Fitting (4)
  • Wing Shape Fitting (1)
  • Wiring Duct (3)
  • Wiring Duct Cover (2)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (1)
  • Carlon (55)
  • Carlon(R) (16)
  • For Dry, Damp or Wet Locations Where Flexibility is Necessary (1)
  • Kindorf (19)
  • OCAL (4)
  • Steel City (12)
  • Superstrut (139)
  • T&B (1)
  • T&B Ind Fitting (6)
  • T&B Liquidtight Systems (4)
  • Thomas & Betts (16)
  • Thomas&Betts-Abb Ins Prod (54)
  • Ty-Duct (9)
  • Show More...

• Material

  

  • Aluminum (3)
  • Carbon Steel (3)
  • High Impact Styrene (1)
  • Low Carbon Steel (2)
  • Malleable Iron (6)
  • Non-Metallic (24)
  • Noryl (1)
  • Plastic;Steel (Closure) (1)
  • Polycarbonate (3)
  • PVC (40)
  • Rigid PVC (5)
  • Stainless Steel (19)
  • Steel (129)
  • Steel (Closure);Vinyl (End Cover) (1)
  • Thermoplastic Rubber (1)
  • Show More...

• Trade Size

  

  • 1 in (4)
  • 1 INCH (3)
  • 1/2 in (5)
  • 1/2 INCH (1)
  • 1-1/2 in (4)
  • 1-1/2 INCH (1)
  • 1-1/4 in (2)
  • 1-1/4 INCH (2)
  • 2 (1)
  • 2 in (5)
  • 2 Inches (2)
  • 3 (3)
  • 3 in (1)
  • 3/4 in (7)
  • 3/8 in (1)
  • 4 (2)
  • Show More...

• Outside Diameter

  

  • 0.734 in (1)
  • 0.84 (3)
  • 1.05 (4)
  • 1.13 (1)
  • 1.188 in;45.4 mm (1)
  • 1.315 (3)
  • 1.32 (1)
  • 1.66 (1)
  • 1.74 (1)
  • 1.9 (2)
  • 1.91 (1)
  • 1.98 (1)
  • 2.375 (2)
  • 2.38 (1)
  • 2.46 (1)
  • 2.492 in;63.30 mm (1)
  • 2.89 in;73.5 mm (1)
  • 3.5 (3)
  • 3.616 in;91.85 mm (1)
  • 4.5 (2)
  • Show More...

• Length

  

  • 0.84 in (1)
  • 1 in (1)
  • 1.17 in (1)
  • 1.275 in;32.39 mm (1)
  • 1.31 in (1)
  • 1.338 in;33.99 mm (6)
  • 1.406 in (1)
  • 1.541 in (1)
  • 1.625 in (1)
  • 1.63 in (1)
  • 1.890 in;48.0 mm (1)
  • 1.959 in (1)
  • 10 ft (27)
  • 100 (2)
  • 1000 ft (1)
  • 11.62 in;295.1 mm (1)
  • 1-1/2 in (1)
  • 118.92 (3)
  • 120 (13)
  • 1200 (8)
  • 1-5/8 in (4)
  • 1500 ft (1)
  • 1-7/16 in (1)
  • 1800 (1)
  • 2 in (1)
  • 20 ft (3)
  • 2-3/8 in (3)
  • 24 in;610 mm (2)
  • 240 (12)
  • 2400 (1)
  • 2-5/16 in (1)
  • 3.44 in (1)
  • 3000 (1)
  • 3-1/2 in (8)
  • 3-1/4 in (1)
  • 3-7/8 in (1)
  • 4.18 in (1)
  • 4.23 in (1)
  • 4.62 in (1)
  • 4.85 in;123.2 mm (1)
  • 4-1/2 in (3)
  • 50 (2)
  • 5-3/8 in (7)
  • 5-9/32 (1)
  • 6 ft , 1.83 m (21)
  • 6 in (4)
  • 6 in (Base) (1)
  • 6.08 in;154.4 mm (1)
  • 6.625 in (1)
  • 600 (1)
  • 6000 (1)
  • 7-1/4 in (2)
  • 72 in;1828.8 mm (5)
  • 9.94 ft;3.03 m (1)
  • 9000 (3)
  • Show More...

• Finish

  

  • Electro-galvanized (18)
  • Electro-Plated (1)
  • Galvanized (9)
  • Galvanized-Krom (1)
  • Galvanized-Krom/Standard (7)
  • Galv-Krom/Standard (3)
  • Gold (6)
  • Gold Galvanized (12)
  • Gold Galvanized/Standard (5)
  • GoldGalv (4)
  • GoldGalv/Standard (13)
  • Green Urethane Powder (2)
  • Hot Dip Galvanized;PVC Coated (1)
  • Hot-Dip Galvanized (7)
  • Hot-Dipped Galvanized (3)
  • Pre Galvanized (9)
  • Pre-Galvanized (6)
  • Silver Galvanized (8)
  • Silver Galvanized/Electro-Galvanized (17)
  • SilverGalv (8)
  • SilverGalv/Electro-Galvanized (13)
  • TPR Jacket (4)
  • Show More...

• Width

  

  • .94 in (1)
  • 0.70 in (1)
  • 0.76 in (1)
  • 0.785 in;19.9 mm (7)
  • 0.81 in (1)
  • 1 in (2)
  • 1 in , 25.4 mm (6)
  • 1.19 in (1)
  • 1.25 in (2)
  • 1.25 in;31.8 mm (3)
  • 1.338 in (2)
  • 1.338 in;33.99 mm (3)
  • 1.5 in (5)
  • 1.5 in , 38.1 mm (1)
  • 1.625 in (5)
  • 1.788 in;45.4 mm (1)
  • 1.94 in (1)
  • 11.62 in;295.1 mm (1)
  • 1-1/2 (2)
  • 1-1/2 in (3)
  • 1-1/4 in (1)
  • 1-3/4 (1)
  • 15 in , 381 mm (4)
  • 1-5/8 (32)
  • 1-5/8 in (24)
  • 2 in , 50.8 mm (4)
  • 2.17 in (1)
  • 2.187 in (1)
  • 2.25 in. (1)
  • 2.25 in;57.2 mm (2)
  • 2.80 in;71.1 mm (1)
  • 2-1/32 in (1)
  • 3 in (3)
  • 3 in , 76.2 mm (4)
  • 3 in;7.62 cm (2)
  • 3-1/2 in (2)
  • 4 in , 101.6 mm (2)
  • 4.5 in (1)
  • 4.625 in;117.48 mm (2)
  • 4.85 in;123.2 mm (1)
  • 4.86 in (1)
  • 5.63 in (1)
  • 5-3/8 in (1)
  • 5-7/8 in (1)
  • 6 in (1)
  • 6 in (Base);3-5/16 (Post) in (1)
  • 7/16 in (1)
  • 78217250333 (1)
  • Show More...

• Inside Diameter

  

  • 0.312 in (1)
  • 0.56 (2)
  • 0.622 (1)
  • 0.76 (3)
  • 0.82 (1)
  • 0.84 (1)
  • 0.98 (1)
  • 1 (1)
  • 1 in (1)
  • 1.041 (1)
  • 1.39 (1)
  • 1.402 (1)
  • 1.54 (1)
  • 1.554 (1)
  • 1.575 (1)
  • 1.62 (1)
  • 2 (1)
  • 2.03 (1)
  • 2.08 (1)
  • Show More...

• Color

  

  • Black (5)
  • Blue (13)
  • Gold (10)
  • Gray (58)
  • Gray 0 (3)
  • Handle: Yellow;Blue (2)
  • Orange (10)
  • Silver (43)
  • White (2)
  • Yellow (7)
  • Show More...

• Capacity

  

  • 1000 lb (1)
  • 14 ga (1)
  • 15.16 cu.in (2)
  • 1650 lb (3)
  • 18 cu.in;295 ml (1)
  • 1900 lb (1)
  • 2150 lb (1)
  • 2200 lb (1)
  • 3000 lb (1)
  • 32 cu.in (1)
  • 3500 lb (1)
  • 400 lb (1)
  • 550 lb (2)
  • 750 lb (9)
  • 800 lb (9)
  • 900 lb (1)
  • Show More...

• Height

  

  • 0.238 in;6.1 mm (3)
  • 0.25 in;6.4 mm (1)
  • 0.358 in (2)
  • 0.358 in;9.1 mm (4)
  • 0.465 in;11.81 mm (2)
  • 0.559 in;14.2 mm (1)
  • 0.673 in;17.1 mm (2)
  • 1.025 in;27.7 mm (1)
  • 1.250 in (2)
  • 1.30 in;35.3 mm (1)
  • 1.98 in (1)
  • 1-1/2 in (1)
  • 13/16 in (5)
  • 1-5/8 in (18)
  • 2.014 in;52.8 mm (1)
  • 2.12 in (1)
  • 2.19 in;53.3 mm (1)
  • 2.42 in;61.5 mm (1)
  • 2.420 in;61.47 mm (2)
  • 2.49 in (1)
  • 2-1/4 in (4)
  • 3 in (2)
  • 3.5 in (3)
  • 3/4 in (1)
  • 3/8 in (1)
  • 3-1/2 in (7)
  • 3-1/2 in (Post) (1)
  • 3-1/4 in;8.25 cm (2)
  • 4-1/8 in (2)
  • 6.00 in;152.4 mm (1)
  • 7/32 in (1)
  • Show More...

• Connection Type

  

  • Threaded (4)
  • UNC (10)
  • Show More...

• Hub Size

  

  • 1/2 in (1)
  • 3/4 (2)
  • 3/4 in (1)
  • Show More...

• Thickness

  

  • 0.112 in (2)
  • 0.322 in;0.817 cm (2)
  • 0.38 in (1)
  • 0.75 in (1)
  • 0.8 in (1)
  • 1/4 in (19)
  • 11 ga (2)
  • 11 Gauge (2)
  • 12 AWG (17)
  • 12 ga (7)
  • 12 GAUGE (3)
  • 14 AWG (8)
  • 14 ga (14)
  • 14 GAUGE (2)
  • 16 ga (1)
  • 3/16 in (3)
  • 3/8 in (1)
  • 5/16 in (1)
  • Show More...

• For Use With

  

  • 4 in. Square and 4-11/16 in. Boxes;1-1/2 in. and 2-1/8 in. Deep (1)
  • A and C Series Channel and Inserts (5)
  • A-1200 & A-1400 Series Channel (1)
  • A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (1)
  • A-1200, B-1200, C-1200, A-1400, B-1400 and B-1402 Series Channels (1)
  • A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • All Kind or F Channels (1)
  • B 900;B 905;B 906 and B 907 Series Channel (1)
  • B Series Channel and Inserts (1)
  • B-1400 Series Channel (1)
  • Cable Tray (7)
  • Direct Sunlight (2)
  • Kind or F Channels (2)
  • PVC Rigid Non-Metallic Conduit Fitting (7)
  • Rigid Conduit and Pipe (1)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (17)
  • Schedule 40 & 80 Conduit (6)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • TY1CP*6 Wiring Duct Cover (2)
  • TY2CP*6 Wiring Duct Cover (1)
  • Wiring Duct (2)
  • Show More...

• Application

  

  • Adapts Non-Metallic Conduit to All Electrical Enclosures by Inserting Adapter Through Knockout and Cementing into Carlon Couplings (1)
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement (2)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (7)
  • Carlon Junction Box Offers All the Corrosion Resistance and Physical Properties Needed For Direct Burial (1)
  • Carlon junction box offers all the corrosion resistance and physical properties needed for direct burial applications (3)
  • Corrosion Protection for Electrical Systems (4)
  • Damp Location (2)
  • Designed and listed for use with non-metallic sheathed cable in accordance with Artile 314 of the National Electrical Code (1)
  • Designed to compensate for length changes due to temperature variations in exposed conduit runs (3)
  • Flex-Plus Blue ENT is a Non-Metallic Flexible Raceway for Use in Walls, Floors and Non-Plenum Ceilings (7)
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings (3)
  • For casting into concrete walls, floors or ceilings to provide for attachment anywhere along the continuous slot (2)
  • For conduits and cables (2)
  • For dead-end terminations (2)
  • For Mounting Pipe or Conduit Parallel to the Beam (1)
  • For multiple through circuit terminations or where additional support is required in stub-up applications (1)
  • For repairing broken PVC conduit a.k.a stub-ups in concrete slabs (2)
  • For use in metal framing applications (15)
  • For use with 4 in. square and 4-11/16 in. boxes, 1-1/2 in. and 2-1/8 in. deep (1)
  • For use with A and C series channel and inserts (7)
  • For use with A Series Channel (1)
  • For use with A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (2)
  • For use with A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • For use with all A and C series channels (1)
  • For use with all A Series Channel (1)
  • For use with all Kindorf channels (4)
  • For use with B series channel and inserts (1)
  • For use with channel and channel fittings (2)
  • For use with conduit or pipe (5)
  • For use with EMT conduit (1)
  • For use with Kindorf channels (1)
  • For use with Rigid Conduit (2)
  • For use with Rigid Conduit and Pipe (7)
  • For use with Schedule 40 and 80 Conduit (2)
  • For use with Schedule 40 and 80 PVC (1)
  • Hanging Rod (1)
  • Hardened Points Bite Into Beam Flange;Fits All I-Beams Where Edge of Beam Flange Does Not Exceed 0.8 In. Thickness (1)
  • Ideally Suited for Continuous Flexing Applications or Vibration (6)
  • Kindrof(R) Modular Metal Framing System (2)
  • Metal Framing (20)
  • Multiple Dead-End Circuit Terminations or Where Additional Support is Required in Stub-Up (1)
  • N (1)
  • Repetitive Flexing Arms (1)
  • Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum (3)
  • Specifically designed for the low voltage, structured cabling market (1)
  • Suitable for damp locations (3)
  • Superstruct(R) Metal Framing System (1)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (44)
  • Support and Framing (25)
  • Support and framing applications (19)
  • Surface Raceway and Lighting Systems (2)
  • Through Terminations Where Two Devices or Additional Wiring Capacity is Required. (1)
  • To secure pipes, tubes and hoses for fluid conductors (5)
  • Used in extremely high temperature applications such as commercial ovens and refrigeration, industrial furnaces and foundries (4)
  • Used to connect modular framing channels to accessories (3)
  • Used to mount, brace, support or connect structural loads in building construction such as pipe or electrical or data wire (5)
  • UV inhibited for use in direct sunlight (4)
  • Uv Resistant - Suitable For Outdoor Use (2)
  • When one-piece quick connect snap-in terminator adapters are installed in a concrete application, Carlons flat sealing washers must be used on the box connection ends (3)
  • Show More...

• Angle

  

  • 120 ° (2)
  • 90 ° (7)
  • Show More...

• Size

  

  • 1 in (5)
  • 1 INCH (7)
  • 1/2 (1)
  • 1/2 in (6)
  • 1/2 INCH (7)
  • 1/2 Inches (1)
  • 1/4 in (6)
  • 1/4 INCH (1)
  • 10.79 Inches (1)
  • 1-1/2 (2)
  • 1-1/2 in (3)
  • 1-1/2 INCH (3)
  • 1-1/2 Inches (1)
  • 1-1/4 in (2)
  • 1-1/4 INCH (2)
  • 1-1/4 Inches (5)
  • 12.29 Inches (1)
  • 2 (4)
  • 2 in (4)
  • 2 Inches (4)
  • 2 x 2 (2)
  • 2 x 3 (2)
  • 2-1/2 (1)
  • 2-1/2 in (1)
  • 2-1/2 Inches (3)
  • 3 (1)
  • 3 in (1)
  • 3 Inches (5)
  • 3 x 3 (2)
  • 3.69 Inches x 3.69 Inches x 2 Inches (1)
  • 3/4 (2)
  • 3/4 in (5)
  • 3/4 INCH (5)
  • 3/8 in (9)
  • 3/8 INCH (1)
  • 3-1/2 in (1)
  • 3-1/2 Inches (1)
  • 4 (1)
  • 4 in (1)
  • 4 Inches (3)
  • 4 x 3 (2)
  • 59.82 Inches (1)
  • 6 Inches (1)
  • 6 Inches x 6 Inches x 4 Inches (1)
  • 7.34 Inches (1)
  • Show More...

• Special Features

  

  • Adapts non-metallic conduit to all electrical enclosures by inserting adapter through knockout and cementing into Carlon couplings (1)
  • All Sizes Take Standard Covers and Accessories or Devices (5)
  • All Springs shall Mechanically Attached to Channel Nut (6)
  • Assembly includes steel clamp with bolt/locknut and cushion (5)
  • Assembly Includes Steel Clamp With Bolt/Locknut and Cushion;To Secure Pipes, Tubes and Hoses For Fluid Conductors;Candle Temperature from -40 to +300°F (1)
  • Attaches 4 in and 4-11/16 Inch Electrical Boxes to Metal Stud;Support Leg Can Be Attached to Stud to Eliminate Movement of Box in Wall;Attaches to Metal or Wood Stud Using Self-Tapping Screws and Screw Gun or Nails (1)
  • Bolt head is combination slot and hex head for flexibility of attachment (44)
  • Color-Coded Thread Protectors (3)
  • Continuous Thread (3)
  • dapts non-metallic conduit to all electrical enclosures by inserting adapter through knockout and cementing into Carlon couplings (1)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (24)
  • Designed to meet UL 360 ID/OD dimension requirements (4)
  • Easy to install (2)
  • Excellent corrosion reisistance (12)
  • Excellent Corrosion Resistance (16)
  • Exclusive molded in mid-point indicator on the piston (3)
  • Extra Strong and Flexible to Withstand Repetitive Motions (1)
  • Fewer parts, less installation time..results - Labor Savings! (1)
  • Four knockout type socket openings, 90 degree spacing (2)
  • Galv Krom finish which out performs other finishes (1)
  • Galv-Krom finish provides superior corrosion protection (1)
  • Hardened points bite into beam flange (1)
  • Ideal for providing a main chase from the main distribution panel to a secondary hub in the attic or basement (1)
  • Kindorf Self Aligning Channel Nuts are Designed to Provide Resistance to Pull Out and Resistance to Side Slip in Excess of the Full Strength of the Channels with Which They are Used (3)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (8)
  • Load ratings as shown have a safety factor of 3 in 3000 lb. hard rock concrete (1)
  • No Metal Core to Fatigue from Flexing or Vibration (6)
  • Non-Metallic Clamps Offer the Same Chemical Resistance as Carlon Non-Metallic Conduits for a Complete, Corrosion Resistant System (4)
  • One size fits all strut depths (3)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (7)
  • Paintable surface with textured finish to hid scratches (2)
  • Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation (1)
  • PVC repair fittings are listed in accordance with the NEC and Section 352.6 (2)
  • Quick Connect Couplings and Threaded Adapters are Concrete-Tight When Used with Carlon ENT (5)
  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT (3)
  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT. (7)
  • Redesigned to Custom Fit Both 1-1/2 In. and 1-5/8 In. Channels (6)
  • Safety Factor = 4 (2)
  • SilverGalv finish will not chip or peel (1)
  • Smaller, higher number of fingers for more concise harnessing. V-Shaped slot lead-in enables easier and faster wire installation. Rounded edges keep hands and wires free of abrasion. (1)
  • Snap-In (3)
  • Snap-Loc Spacers provide a side dovetail rail-and-groove design enabling side-by-side interchangeability of conduit spacer sizes while maintaining horizontal stability (8)
  • Socket on one end with threads on offset (1)
  • Supports Threaded Rod;Threaded Brindle Rings and Electrical Boxes (1)
  • Textured lids (1)
  • The first non-metallic junction box UL Listed with a NEMA 6P rating per Section 314, exception of the National Electrical Code (4)
  • The Maximum Number of Support and Framing Applications can be Constructed with a Minimum Amount of Labor and Pieces (25)
  • Thread Protector Cap (1)
  • UL Listed and is available with tape pre-installed (3)
  • Show More...

• Center Spacing

  

  • 1-1/2 in (2)
  • 1-1/8 in (3)
  • 2 in (17)
  • Show More...

• Hole Size

  

  • 1 in (1)
  • 3/4 in (2)
  • 9/16 in (13)
  • Show More...

• Sub Brand

  

  • Carlon (9)
  • Kindorf(R) (16)
  • Snap Guard(R) (1)
  • Steel City(R) (4)
  • Superstrut(R) (71)
  • Show More...

• Connection Size

  

  • 1/2 in - 13 (3)
  • 1/4 in - 20 (2)
  • 3/8 in - 16 (5)
  • 3/8 in - 16 UNC (1)
  • Show More...

• Slot Size

  

  • 9/16 in (2)
  • 9/16 x 1-1/8 in (17)
  • Show More...

• Package Quantity

  

  • 1 CT;10 PK (1)
  • 1 CT;50 Pk (1)
  • 1 PK ( Inner);10 PK (Outer) (1)
  • 10 CT (3)
  • 10 PK (3)
  • 10 PK (Inner);100 PK (Outer) (1)
  • 10 PK;100 CT (1)
  • 10 PK;250 CT (3)
  • 10 PK;500 CT (14)
  • 10 PK;600 CT (2)
  • 100 CT (21)
  • 100 CT;500 PK (4)
  • 100 PK (3)
  • 1000 PK (1)
  • 120 CT;6 PK (3)
  • 15 PK (3)
  • 150 PK (1)
  • 1500 PK (1)
  • 2 PK (1)
  • 20 CT (3)
  • 20 PK (1)
  • 20 PK;500 CT (2)
  • 200 PK (1)
  • 25 CT (15)
  • 25 PK (1)
  • 250 CT (1)
  • 50 CT (19)
  • 500 CT (5)
  • 60 CT;6 PK (2)
  • 750 PK (1)
  • 900 PK;10 CT (1)
  • Show More...

• Weight

  

  • 0.03 lb/EA (1)
  • 0.07 lb/EA (1)
  • 0.09 lb/EA (1)
  • 0.14 lb/EA (1)
  • 0.15 lb/100 (1)
  • 0.25 lb/EA (2)
  • 0.28 lb/100 (1)
  • 0.5 lb/EA (1)
  • 0.53 lb/EA (1)
  • 0.58 lb/EA (1)
  • 0.61 lb/EA (1)
  • 0.63 lb/100 (1)
  • 0.66 lb/EA (1)
  • 0.76 lb (1)
  • 1.06 lb/ft;0.48 kg/ft (1)
  • 1.69 lb/100 (1)
  • 1.9 lb (1)
  • 10.5 lb/100 (1)
  • 11.63 lb/100 (1)
  • 11.69 lb/100 (1)
  • 12.38 lb/100 (1)
  • 12.5 lb/100 (4)
  • 12.75 lb/100 (1)
  • 124 lb/ft (1)
  • 13.33 lb/100 (1)
  • 13.5 lb/100 (1)
  • 136 lb/ft (1)
  • 137.5 lb/100 (1)
  • 14 lb/100 (1)
  • 14.5 lb/100 (1)
  • 15 lb/100 (1)
  • 15.38 lb/100 (1)
  • 15.5 lb/100 (1)
  • 152 lb/100 (1)
  • 16 lb/100 (1)
  • 16.63 lb/100 (1)
  • 16.75 lb/100 (1)
  • 18 lb/100 (1)
  • 18.88 lb/100 (1)
  • 185 lb/100 (5)
  • 190 lb/100 (4)
  • 2.16 lb/EA (1)
  • 2.5 lb/100 (1)
  • 23 lb/100 (1)
  • 25 lb/100 (2)
  • 27 lb/100 (1)
  • 27.5 lb/100 (1)
  • 28.31 lb/100 (1)
  • 3.1 lb/EA (1)
  • 3.5 lb/100 (1)
  • 3.53 lb (1)
  • 30.19 lb/100 (2)
  • 34.5 lb/100 (1)
  • 35.5 lb/100 (1)
  • 355 lb/100 (1)
  • 357 lb/100 (1)
  • 36 lb/100 (1)
  • 360 lb/100 (2)
  • 37.5 lb/100 (2)
  • 39.63 lb/100 (1)
  • 392 lb/100 (1)
  • 4.25 lb/EA (1)
  • 4.5 lb/100 (1)
  • 4.69 lb/100 (1)
  • 40.38 lb/100 (1)
  • 402 lb/100 (1)
  • 43 lb/100 (1)
  • 5 lb/EA (1)
  • 50 lb/100 (3)
  • 54 lb/100 (1)
  • 54.5 lb/100 (1)
  • 55 lb/100 (2)
  • 56 lb/100 (1)
  • 6 lb/100 (1)
  • 6.25 lb/100 (1)
  • 6.25 lb/EA (1)
  • 6.81 lb/100 (1)
  • 64.5 lb/100 (1)
  • 7.13 lb/100 (1)
  • 7.5 lb/100 (1)
  • 7.81 lb/100 (1)
  • 71 lb/100 (1)
  • 72 lb/100 (1)
  • 73 lb/100 (1)
  • 73.19 lb/100 (1)
  • 74.5 lb/100 (2)
  • 75 lb/100 (1)
  • 76.81 lb/100 (1)
  • 8.13 lb/100 (1)
  • 8.5 lb/100 (1)
  • 8.63 lb/100 (1)
  • 8.81 lb/100 (1)
  • 83.5 lb/100 (1)
  • 84.1 lb/ft (1)
  • 84.38 lb/ft (1)
  • 87 lb/ft (3)
  • 9 lb/100 (1)
  • 9.06 lb/100 (1)
  • 9.75 lb/100 (1)
  • Show More...

• Number Of Holes

  

  • 0 (12)
  • 1 (13)
  • 12 (1)
  • 2 (4)
  • 3 (7)
  • 4 (11)
  • 5 (2)
  • 9 (1)
  • Show More...

• Wall Thickness

  

  • 0.139 in;3.53 mm (1)
  • 0.17 (1)
  • 0.18 (1)
  • 0.19 (1)
  • Show More...

• Category Description

  

  • BEAM, RA, EDGE, & PARALLEL CLAMPS (8)
  • CONDUIT HANGERS/STAND OFF STRAPS (1)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (25)
  • DIECAST OFFSET & CHASE NIPPLES (1)
  • FLOOR BOXES (1)
  • FS BOXES AND COVERS (7)
  • Fuses & Fuse Accessories (1)
  • HAZARDOUS LOCATION MOTOR CONTROL (1)
  • Liquid Tight (9)
  • MISC FITTINGS (54)
  • NON METALLIC JUNCTION BOXES (1)
  • NON-METALLIC SEALTITE AND FITTINGS (4)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (3)
  • PLASTIC BOXES (1)
  • PVC & ENT (13)
  • PVC BOXES (3)
  • PVC CONDULETS (1)
  • PVC ELBOWS (6)
  • PVC SPACERS (9)
  • PVC STRAPS (4)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (5)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (1)
  • SPRING NUTS & TWIRL NUTS (12)
  • STRUT CHANNEL (51)
  • STRUT STRAPS (64)
  • THREAD RODS (4)
  • WEATHERPROOF BOXES & COVERS (1)
  • WIRE DUCT AND COVERS (27)
  • Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds (1)
  • Show More...

• Minimum Qty

  

  • 10 (44)
  • 100 (8)
  • 1000 (1)
  • 150 (1)
  • 1500 (1)
  • 175 (1)
  • 20 (15)
  • 200 (2)
  • 50 (2)
  • 500 (2)
  • 6 (27)
  • 750 (3)
  • Show More...

• Type

  

  • 90 degree Angle Fittings (10)
  • Angular Fittings (2)
  • Beam Clamps (3)
  • Beam Clamps & Hanger Rod Supports (1)
  • Beam Clamps (Series 500) (5)
  • Box & Threaded Adapters (3)
  • Brackets (1)
  • CAP FITTING, 304/304L STAINLESS STEEL MATERIAL; 4 INCH NOMINAL SIZE; 4 NOMINAL SIZE - DECIMAL; 4 NOMINAL SIZE - FRACTIONAL; NUCLEAR, PHARMACEUTICAL INDUSTRY CHEMICAL, PETROCHEMICAL APPLICATION; FORGED PROCESS; ASTM A182 MATERIAL SPECIFICATION (2)
  • Channels and Concrete Inserts (2)
  • Clamp, Beam (1)
  • Clamp, RC Beam (2)
  • Conduit Clamps & Support Straps (4)
  • Conduit, Cable & Pipe Supports (8)
  • Conduit-PVC Coated (4)
  • Cone Nut (3)
  • Couplings (3)
  • Duct Cover (5)
  • ENT Flexible Raceway (18)
  • Expansion Fittings (3)
  • Fittings & Hardware (7)
  • Fittings, Brackets & Hardware (19)
  • Flat Plate Fittings (1)
  • Flexible Raceway (1)
  • Liquid Tight Flexible Metallic Conduit (4)
  • Liquidtight Flexible Non-Metallic Conduit & Fittings (1)
  • Male & Female Adapters (1)
  • Metal Channels (49)
  • Narrow Slot Duct (14)
  • Outlet Boxes (1)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (57)
  • Pipe Straps, Pipe Clamps and Hangers (2)
  • Post Bases (2)
  • Rigid Non-Metallic Conduit Bodies & Covers (2)
  • Rigid Non-Metallic Conduit Fittings & Accessories (5)
  • Rigid Non-Metallic Conduit Junction Boxes (4)
  • Rigid Non-Metallic Conduit-Schedule 40 Elbows (4)
  • Rigid Non-Metallic Conduit-Schedule 80 Elbows (2)
  • Rigid Non-Metallic FS & FD Boxes & Covers (5)
  • Riser-Gard Flexible Raceway (3)
  • Risers & Riser Caps (2)
  • Snap-Loc Spacers & Accessories (9)
  • Surface Raceway & Lighting Systems (Series 800) (2)
  • Threaded Products & Hardware (Series 100) (14)
  • Type A-Non-Metallic Liquidtight Conduit (6)
  • Type LB Conduit Body (1)
  • Weatherproof Covers (2)
  • Wide Slot Duct (7)
  • Wiring Duct (1)
  • Show More...

• Depth

  

  • 0.37 IN (2)
  • 0.718 in (1)
  • 1 in , 25.4 mm (2)
  • 1-1/2 (1)
  • 1-11/32 in (1)
  • 12.05 (1)
  • 13.78 (1)
  • 13/16 (8)
  • 13/16 In (8)
  • 15 in , 381 mm (1)
  • 1-5/8 (23)
  • 1-5/8 In (8)
  • 2 in , 50.8 mm (6)
  • 2.15 in (1)
  • 2-3/8 in (1)
  • 3 in , 76.2 mm (7)
  • 3.14 lm (1)
  • 3/4 (1)
  • 3-1/8 (1)
  • 4 in , 101.6 mm (5)
  • 4.5 in (1)
  • Show More...