Narrow By:

• Manufacturer: LH

• Product Type

  

  • 1 Gallon Roof Mastic Asbestos Free (1)
  • 1 Quart Roof Mastic Asbestos Free (1)
  • 1/16" High Speed Steel Drills (1)
  • 1/2 X 150' Line Packages - Nylon 17# Tensile - Red (1)
  • 1/2 X 54" Flex - A - Bit (1)
  • 1/2 X 6" Masonry Drill Bit ( Carbide Tip ) (1)
  • 1/2 X 72" Flex - A - Bit (1)
  • 1/2" High Speed Steel Drills (1)
  • 1/2" to 2 1/2" (13PCS Set, Includes Case and 12 Ton Hydrauli (1)
  • 1/2" X 500' Polyester Pull Line-Measuring Tape 1250 LB. (1)
  • 1/4 X 1/2 Round Head Machine Screws Stainless Steel (1)
  • 1/4 X 1000' Pull Rope - Polypropylene - Yellow (1)
  • 1/4 X 18 Bell Hanger Bit (1)
  • 1/4 X 2-9/16" Magnetic Hex Tool (1)
  • 1/4 X 3" Magnetic Bit Holder (1)
  • 1/4 X 4" Magnetic Hex Tool (1)
  • 1/4 X 600' Pull Rope - Polypropylene - Yellow (1)
  • 1/4" High Speed Steel Drills (1)
  • 1/8" High Speed Steel Drills (1)
  • 10 - Piece Ratcheting Punch Tool Kit (1)
  • 10' Nylon Web Straps - Blue (1)
  • 10' Nylon Web Straps - Blue ( 2 PK. ) (1)
  • 10.3 Oz. Roof Mastic Asbestos Free - Cartridge (1)
  • 10.3 Oz. RTV Silicon Sealant White - Cartridge (1)
  • 11/32" High Speed Steel Drills (1)
  • 1-1/8" Base & 1 Tip - Tip Bits (1)
  • 12' Nylon Web Straps - Black (1)
  • 13 In 1 Ratcheting Screwdriver (1)
  • 13 PCS. High Speed Steel Drill Kit (1)
  • 1-3/8" Base & 1 Tip - Tip Bits (1)
  • 15 In 1 SCRDRVR Tamper Proof - Red/Black (1)
  • 15 In 1 Screwdriver Blue / Yellow (1)
  • 15/32" High Speed Steel Drills (1)
  • 15/64" High Speed Steel Drills (1)
  • 2' Nylon Web Straps - Red ( 2 PK. ) (1)
  • 21/64" High Speed Steel Drills (1)
  • 2150' Nylon Fishing Line - Center Pull - 85# (1)
  • 2200' Pull Line (Heavy Duty) Dispensing - Pail (1)
  • 23 PKT-Elec & Maint Pouch 8/CS 15267 (1)
  • 27/64" High Speed Steel Drills (1)
  • 29 PCS. High Speed Steel Drill Kit (1)
  • 29/64" High Speed Steel Drills (1)
  • 3 Oz. RTV Silicon Sealant Clear - Tube (1)
  • 3/16" High Speed Steel Drills (1)
  • 3/16" X 30' Five 3/16" X 6' Lite Stick Rods W - Eyes (1)
  • 3/16"X1-1/4" Phillips PNHD Wall Twister KT (1)
  • 3/16"X1-1/4"Hexhd Phil/SQR Wall Twister KT (1)
  • 3/4 X 200' Line Packages - Nylon 17# Tensile - Yellow (1)
  • 3/4 X 54" Flex - A - Bit (1)
  • 3/4 X 8" 14-T Reciproblades Bi-Metal (1)
  • 3/4" Auger Bit ( Long ) (1)
  • 3/8 X 12" Masonry Drill Bit ( Carbide Tip ) (1)
  • 3/8 X 1200' Pull Rope - Polypropylene - Yellow (1)
  • 3/8 X 4" Masonry Drill Bit ( Carbide Tip ) (1)
  • 3/8 X 6" Masonry Drill Bit ( Carbide Tip ) (1)
  • 3/8 X 600' Pull Rope - Polypropylene - Yellow (1)
  • 3/8" High Speed Steel Drills (1)
  • 3/8"X3" Phil/SLT Mushroomhd Toggle Bolt (1)
  • 3/8"X4" Phil/SLT Mushroomhd Toggle Bolt (1)
  • 31 PCS. Compact Combo Bit Kit (1)
  • 3-PC. Pro-Grabit Screw Removal Kit (1)
  • 4' Nylon Web Straps - Yellow ( 2 PK. ) (1)
  • 42 Gal 3 Mil Contractor Clean-Up Bags (1)
  • 48" Professional Grade Post Hole Digger (1)
  • 5 Gallon Multipurpose Pail (1)
  • 5/16 X 1-3/4" Magnetic Hex Tool (1)
  • 5/16" High Speed Steel Drills (1)
  • 525' Nylon Fishing Line - Center Pull - 348# (1)
  • 5-LB. Duct Seal Ul Listed (1)
  • 6 - PCS. Drill / Tap Hex Bit Kis (1)
  • 6' Nylon Web Straps - Green (1)
  • 6' Nylon Web Straps - Green ( 2 PK. ) (1)
  • 6" Snaggletooth Pro Saw (1)
  • 7/16 X 4" Masonry Drill Bit ( Carbide Tip ) (1)
  • 7/16" High Speed Steel Drills (1)
  • 7/32" High Speed Steel Drills (1)
  • 7/8" Auger Bit ( Long ) (1)
  • 7/8" Base & 1 Tip - Tip Bits (1)
  • 7/8", 1-1/8" Base, 3 Tips & Pouch - Tip Bits (1)
  • 8' Nylon Web Straps - Purple ( 2 PK. ) (1)
  • 9/16 X 54" Flex - A - Bit (1)
  • All Purpose Marking Paint - Flourescent Orange (1)
  • All Purpose Marking Paint - Yellow (1)
  • Ballistic Poly Electrical Combo (1)
  • Carded 1 Pack - 1/2" High Speed Steel Drills (1)
  • Carded 1 Pack - 5/16" High Speed Steel Drills (1)
  • Carded 1 Pack - 7/16" High Speed Steel Drills (1)
  • Carded 1 PC. 3/8 X 2-9/16" Magnetic Hex Tool (1)
  • Carded 1 PC. 5/16 X 2-9/16" Magnetic Hex Tool (1)
  • Carded 2 PC. #2 X 1" Phillips Insert Bit (1)
  • Carded 2 PC. #2 X 2" Phillips Power Bit (1)
  • Carded 2 PC. #3 X 3" - #12 - #14 Square Drive Power Bi (1)
  • Caulking Gun (1)
  • Construction Marking Paint - Blue (1)
  • Construction Marking Paint - Flourescent Pink (1)
  • Construction Marking Paint - Green (1)
  • Construction Marking Paint - Hi Vis Yellow (1)
  • Contact Cleaner (1)
  • Cutting Oil (1)
  • Cutting Oil, Water Based - Metal Working Fluid (1)
  • Dolly With 10" Rubber Tires 5 Adj. Bars- Folds Flat (1)
  • Duct Seal (1)
  • Fits All Shoe Covers Packed 50 Per Jar (1)
  • Glove (2)
  • Hand Tote (1)
  • Handi Foam Expanding Sealant (1)
  • High Speed Steel Drill (2)
  • Hornet and Wasp Spray (1)
  • Hydraulic Punch Kit (1)
  • Insulated Phillips Screwdriver 0 X 60MM (1)
  • Insulated Phillips Screwdriver 1X 80MM (1)
  • Insulated Square Tip Driver #1 X 100MM (1)
  • Knockout Seal (2)
  • K-PVC Cutter (1)
  • Line Measuring Tape (5)
  • Linemeasuring Tape (5)
  • Lockback Razor Knife - New Design (1)
  • Magnetic Hex Tool (3)
  • Marking Paint (4)
  • Masonry Drill Bit (3)
  • Multi Purpose Wet Lubricant - 'All-4' (1)
  • Portable Cable Dispenser (1)
  • Pro Framer XC Gloves - Extra Large (1)
  • Professional Grade Shovel (4)
  • Pull Rope (1)
  • Replaceable Tip - 2 Pack - Tip Bits (1)
  • Roof Flashing (2)
  • Roof Jack (2)
  • RTV Silicon Sealant (2)
  • RTV Silicone Sealant (2)
  • Rust Proof Any-Way Paint - Meter Gray (Ansi-49) (1)
  • Rust Proof Paint (1)
  • Rust Proof Paint - Light Gray (Ansi-61) (1)
  • Rust Proof Paint - Safety Blue (1)
  • Rust Proof Paint - Safety Red (1)
  • Silicone Lubricant (1)
  • Single Drill (1)
  • Solvent Based Cutting Oil (1)
  • Specialty Marking - Clear Coat (1)
  • Top Grain Hybrid Glove - L 72 PR/CS 28546 (1)
  • Top Grain Hybrid Glove - XL 72 PR/CS 28553 (1)
  • Web Strap (4)
  • Wiping Rag (3)
  • Work Gloves (1)
  • Zinc Rich Cold Galvanized Coating (1)
  • Show More...

• Brand

  

  • CLC Workgear (4)
  • Dottie (3)
  • DOTTIE L H COMPANY (1)
  • L.H. Dottie CO. (23)
  • LH DOTTIE (136)
  • Show More...

• Material

  

  • 18-8 STAINLESS STEEL (1)
  • AISI 1018 Carbon Steel (2)
  • Aluminum (2)
  • Bi-Metal (1)
  • Carbon Steel (2)
  • Fiberglass (1)
  • Fiberglass Handle (1)
  • High Speed Steel (21)
  • JERSEY (1)
  • M2 High Speed Steel (8)
  • Nylon (16)
  • Padded Synthetic (2)
  • Polyester (6)
  • Polypropylene (5)
  • Polypropylene Spun Bond (1)
  • Polyurethane Foam (1)
  • Steel (7)
  • Synthetic Leather (1)
  • Tip:Tungsten Carbide (5)
  • Tungsten Carbide (3)
  • Show More...

• Blade Material

  

  • Heavy Duty (1)
  • High Alloy CVM Steel (1)
  • Show More...

• Bit Size

  

  • #3 (2)
  • 1/4 in (3)
  • 1/8 in (1)
  • 3/16 in (1)
  • 3/8 in (1)
  • 5/16 in (3)
  • Show More...

• Application

  

  • All Commercial/Industrial (2)
  • All Purpose (1)
  • Bulbs and Sockets, Circuit Breakers, Cables, Elevators, Generators, Ignition Systems, Lift Trucks, Coils, Vending Machines, Lawn Mowers, Machinery, Spare Parts, Nuts And Bolts, Wheels, Bicycles, Transformers (1)
  • Caulks, Sealants, Adhesives (1)
  • Concrete;Ceramics;Fabric;Glass;Leather;Metal;Plastics;Rubber;Tile;Vinyl;Wood (2)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction Marking (2)
  • Construction;Aervoe Survey Marking (4)
  • Electrical (11)
  • Electrical;Plumbing;Air Conditioning;Refrigeration (1)
  • Flashings;Junction Box;Service Masts (1)
  • For All Shoes (1)
  • For Brick, Concrete, Tile, Slate And Cinder Block (7)
  • For Cutting Openings For Electrical Outlets (1)
  • For Equipment Touch-Up/OEM Production Applications (1)
  • For General Rough-in, Metal Cutting And Nail-Embedded Wood (1)
  • For securing Contractor, DIY, Landscape Maintenance, recreational loads and more. (12)
  • For Steel, Steel Forging, Cast Iron and Other Work Materials (21)
  • For Telephone Installations, Security And Cable Applications (1)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • Gas-Oil (1)
  • General Purpose (3)
  • General Use (1)
  • Hardware/Fastening (1)
  • Industrial (8)
  • Industrial Cutting (1)
  • Junction Box Flashing, Service Masts (1)
  • Metal Cutting Operation, Machining Operation (1)
  • Multi-Purpose (3)
  • Non-Galvanized Metal;Steel;Masonry;Wood;Machinery;Motors;Tools;Cabinets;Toolboxes;Steel Bars;Pipelines;Drums;Conduit;Ducts;Furniture and Ideal for Marking Hazard Area (1)
  • Plenum (1)
  • Relays, Switches, Contacts, Circuit Breakers, Plugs, Jacks, Terminals, Circuit Boards, Generators, Electromechanical Assemblies, Fusible Disconnects, Some Plastic Conveying Equipment (1)
  • Schedule 40 Polyvinyl Chloride (PVC) (1)
  • Sewer (1)
  • Structural Steel, Fencing, Automobiles, Guard Rails, Bridges (1)
  • Temporary Survey Marking (1)
  • Threading Steel and Cast Iron and is Recommended for Cutting Ferrous Materials and Ferrous Alloy (1)
  • Water (1)
  • Wood Drilling (2)
  • Show More...

• Blade Length

  

  • 3 in (1)
  • 6 (1)
  • Show More...

• Shank Diameter

  

  • 1/4 (6)
  • 1/4 in (5)
  • 3/16 (21)
  • 3/16 in (1)
  • 7/16 (2)
  • Show More...

• Drive Type

  

  • Hex/Phillips/Square (1)
  • Phillips (1)
  • Slotted (1)
  • Show More...

• Size

  

  • #2 x 48 IN (1)
  • 1 (4)
  • 1/2 in;3/4 in;1 in (1)
  • 1/2-2 (1)
  • 1/4 (1)
  • 1/4-20 X 1/2 IN (1)
  • 10 (3)
  • 10.9 oz (1)
  • 1-1/2 in;2-1/2 in;3 in (1)
  • 1-1/8 (1)
  • 12 (1)
  • 13 Piece (1)
  • 1-3/8 (1)
  • 14 x 27 (1)
  • 14 x 48 (1)
  • 16 (10)
  • 16 Piece (1)
  • 2 x 4 (1)
  • 20 (10)
  • 2-1/2 (1)
  • 3 (2)
  • 3/4 x 8 (1)
  • 4 x 48 (1)
  • 5 (1)
  • 5/8, 1 (1)
  • 7/8 (1)
  • 7/8, 1-1/8 (1)
  • 8 (1)
  • Extra Large (1)
  • Large (1)
  • Medium (1)
  • One Size Fits Most (1)
  • Random (3)
  • Show More...

• Handle Material

  

  • ABS, Aluminum (1)
  • Fiberglass (4)
  • Heavy Duty Nylon (1)
  • Poly Fabric (1)
  • PVC (1)
  • Show More...

• Color

  

  • Black (3)
  • Black Oxide (3)
  • BLACK, YELLOW (1)
  • Black;Gold (3)
  • Blue (4)
  • Brown (1)
  • Clear (5)
  • Creme (1)
  • Fluorescent Orange (2)
  • Fluorescent Pink (1)
  • Fluorescent Red/Orange (1)
  • Green (3)
  • Hi-Visibility Yellow (1)
  • Light Brown (2)
  • Light Gray (1)
  • Meter Gray (1)
  • Purple (2)
  • Red (4)
  • Safety Blue (1)
  • Safety Red (1)
  • Safety Yellow (1)
  • White (4)
  • Yellow (10)
  • Show More...

• Tip Size

  

  • #1 (1)
  • #2 (2)
  • #3 (1)
  • 1/4 (1)
  • Hex Pin:1/8 IN, 9/64 IN, 5/32 IN, 3/16 IN, Spanner:#6, #8, #10, #12, Star Pin:T10, T15, T20, T25, T27, T30 (1)
  • Phillips:#0, #1, #2, #3, Square:#0, #1, #2, #3, Slotted:#4, #6, Star:T10, T15, T20, T25 (1)
  • Square:#0, #1, #2, #3, Phillips:#0, #1, #2, #3, Slotted:#0, #1, #2, #3, Star Pin:T10, T15, T20, T25, T27, T30, Spanner:#6, #8, #10, #12, #14, Hex Pin:3/32 IN, 1/8 IN, 5/32 IN, 3/16 IN, 7/32 IN (1)
  • Show More...

• Finish

  

  • Black Oxide (7)
  • Black/Gold (23)
  • Cobalt Titanium Coated (5)
  • Galvanized (1)
  • Zinc Plated (6)
  • Show More...

• Special Features

  

  • Adjustable for Various Thicknesses, Contractor Oriented Design, Easy to Use, Wings Open to Distribute Load Evenly (2)
  • All Steel Single Piece Screw Anchor, Reverse Serrations Prevent Over Torquing, Heat Treated Point, High Profile Threads, Resists Wobble/Stripping, Can Be Removed (2)
  • Anti-static ; Non-linting ; Impervious material ; EZ on-EZ off (1)
  • Bell hanger drills are used to drill and fish small gauge wires ; After drilling through the stud or header, a wire is attached to the fish hole in the flute and the drill is retracted, pulling the wire through ; Tapered for quick chip clearance (1)
  • Constructional Feature Abrasion Resistant;Standard Package 1 (4)
  • Constructional Feature Abrasion Resistant;Standard Package 4 (1)
  • Double Friction Rod;Long Trigger Leverage;Thumb Pressure Release;Standard Cartridge Size (1)
  • Features: 100 Filament #36 Nylon, Rot Resistant, 580 FT Length, 310 LB Tensile Strength (1)
  • Features: 5 Silicone Formula, Insulates, Stops Squeaks and Sticking, Prevents Freezing, Brings Life Back to Old Rubber and Weather-Stripping Keeping it Soft and Flexible, Will not Harm Most Plastics, Repels Water, Waterproofs Ignition Systems (1)
  • Features: Adheres to Most Clean Surfaces, Non Toxic/Asbestos Free (2)
  • Features: Aluminum Tool Features 12 Ton Fully Articulating Head - 360 ¦ Capability, Only One Tool Required for all Dies to 6", Laser Etched Markings on Die Cups for Precise Location, Dies Require 50 Less Torque than Competitive Dies, 3 Point Die Design - (2)
  • Features: Asbestos Free, Used in Wet or Dry Locations (3)
  • Features: Assembled, Includes Screw and Threaded Strap (2)
  • Features: Center Feed, Fits Most Canister Systems, Mildew Resistant, 2150 FT Length, 85 LB Tensile Strength (1)
  • Features: Contains 97 Pure Zinc Metallic Powder, Which Yields 94 Zinc And 6 Resin Dry Film, Passed Preece Test for Hot-Dip Galvanizing, Stops Rust on Steel and Iron, Sacrificial Anodization (1)
  • Features: Convenient Storage for a Wide Range of Bits, 1/4" Hex Driver Shaft - Great for 1/4" Hex Head Screws, Precision 28 Tooth Ratchet Makes Driving Fasteners Faster and Easier, Heavy Duty Nylon Reinforced Handle & Chamfered Solid Steel Shaft For Long (1)
  • Features: Cost Effective, 2 Month Visibility (2)
  • Features: Drill, Tap and Deburr in One Operation, 135 DEG Self-Centering Split Point Tip, Tapered Tap Prevents Thread Damage from Over-Drilling, Countersink also Provided on Bit Beyond Back Taper (1)
  • Features: Easily Cuts Wallboard, Drywall, Plywood, Plastic, Blade Cuts in Both Directions, Laser Cut Triple Ground Teeth, Triangular Handle, Sheeth Included (1)
  • Features: Ergo Cut Technology, Neoprene-Spandex Laminated Back, 100 Washable, Charmude Synthetic Leather Palm for Ventilation, Double-Stitched Scholler Keprotec Secondary Palm Layer for Positive Grip and Shock Absorption, Cut Level 5 Gloves (1)
  • Features: Extra Strength, Reduced Breakage, Heat Treated, Resist Breakage and Wear, Specially Designed to Reduce Stripping (5)
  • Features: Fused Powder Coated Yellow for Durability & High Visibility (3)
  • Features: Heat Treated For Long Life, Self Feeding Screw Point, 2 Recesses Provided for Extensions (2)
  • Features: Heavy Duty Blade (1)
  • Features: Heavy Duty Jobber Length, 3 Flats on Sizes 3/16" and Larger (2)
  • Features: High Gloss, Will Not Chip or Peel (5)
  • Features: High Quality, Good Visibility, Durable (9)
  • Features: Industrial Quality, Heavy Duty Jobber Length, Fractional Sizes (21)
  • Features: Low Odor, Flexible, Non Acetic & Non Corrosive, Non Sagging, Watertight, Withstands Temperatures to 450¦ F (4)
  • Features: Magnetic (3)
  • Features: Maximum Durability, Precision Fit, Prevents Wear (3)
  • Features: Minimum Breaking Strength of 261 LB Per DTH6950-1, Safe From Electrical Shock, Does Not Absorb Moisture, Resists Industrial Chemicals, Ergonomically Designed Grip (4)
  • Features: New Bleached Knit Rags, Medium Weight, Soft, Absorbent, Low Lint (2)
  • Features: Nylon Line, Color Coded, 17 Lb Tensile Strength (2)
  • Features: Palm Saving Rotation Cap, Rotating Balance Point Collar, Spring Loaded Ball Bearing Bit, Full Length Solid Steel Shaft, Retracting Bit Storage, High Impact Triax Housing, 59+ Rockwell Hardness (1)
  • Features: Petroleum Mineral Oil, Chlorinated Additive (1)
  • Features: Polyester, Sequentially Marked, Pre-Lubed, Abrasion Resistant (1)
  • Features: Polypropylene, Safety Yellow (5)
  • Features: Punches Stainless Steel (1)
  • Features: Quick Sticks will Flex up to 90¦ Without Breaking, Made from High Strength, Low Weight Fiberglass Material, Lite Sticks "Glow" in The Dark for Better Visibility During Use, Caution Always Wear Eye Protection (1)
  • Features: Quickly and Easily Removes Most Damaged Screws Such as Hex, Phillips, Torx, Square Drive, Sizes No. 4 - No.14 from Wood, Plastic or Metal, Two-Step Drill Bit and Extractor In One Tool Extracts Broken Bolts and Damaged Screws Fast, Use In Reverse (1)
  • Features: Recycled Color T-Shirt Material, Medium Weight, Absorbent (1)
  • Features: Reinforced with High- Viscosity Oils and Sulfur- Free Extreme Pressure Additives, Prolongs Tool Life, Reduces Tool Sharpening and Down Time, Lubricates and Cools at the Cutting Point (1)
  • Features: Seals To Prevent Air and Moisture Infiltration, Seals the Building Envelope, Improves Building Efficiencies by Sealing Penetraitions, Improves Indoor Air Quality (1)
  • Features: Self Feeding Point, Flexible Spring Steel Shaft (4)
  • Features: Silicone Free, Displace Moisture, Cleans Away Dirt & Grease, No Gummy Residue, Fills Microscopic Irregularities (1)
  • Features: Spring Release, One Hand Opening Mechanism (1)
  • Features: Tamper Proof, Contains Common Security Bit Load, Specially Loaded For the Security Professional (1)
  • Features: Tamper Proof, Packed in a Belt Mount Case (1)
  • Features: Tempered Body for Long Life, Slow Spiral, Suitable for Rotary or Percussion, For Brick, Concrete, Tile, Slate and Cinder Block (8)
  • Features: Tri-Cut Tip Cuts Smoother, Faster And Cooler, "Plier Tite" Tip Fit (5)
  • Features: Two Ply Pull Line, Dispensing Box, Dispensing Pail (1)
  • Features: USDA F-2, Sprays upto 20ft, High Active Ingredient, High Dielectric Strength of 41kV/mm, Lasting Residual Deposit Prevents Reinfestation for Week (1)
  • Features: Vacuum Heat Treated, Tooth Hardness RC66-68, Powder Coated, For General Rough-In, All Woods Nail-Embedded Wood (1)
  • Features: Water-Tight Seal (2)
  • Features: Weatherproof, 750 LB Test Webbing, Strong 1 IN Heavy Duty Web Construction, Rustproof, Cam-Action Buckle, For Securing Contractor DIY, Landscape Maintenance, Recreational Loads (12)
  • KB Value of 29 and Less than 10% IPA;This is an Excellent Product to Clean Non-Energized Equipment (1)
  • Minimum breaking strength of 261 LB Per DTH6950-1 ; Safe from electrical shock ; Does not absorb moisture ; Resists industrial chemicals ; Ergonomically designed grip; Tensioned fiberglass (1)
  • Reduces Down Time and Sharpening Needs. Extends Tool Life and Protects Machine Parts Against Rust and Other Corrosion. Clings at Any Angle (1)
  • Stainless steel round head machine screws project above the material surface ; This head style is used when clearance is not an important factor ; Length is determined from the base of the fastener head ; Stainless steel resists corrosion and is ideal for applications where chemical resistance is required ; Invincibox up to 2 IN (1)
  • Textured Fingertip Pads Provide Added Abrasion Resistance;Padded Knuckles for Protection Against Bumps;Stretch Spandex Back for Flexibility and Fit (2)
  • Show More...

• Length

  

  • 1 (1)
  • 1/2 (1)
  • 10 (2)
  • 12 (1)
  • 12 ft (1)
  • 1500 ft (2)
  • 2 (3)
  • 2150 (1)
  • 2200 (1)
  • 3 (2)
  • 30 (1)
  • 3000 ft (2)
  • 4 (3)
  • 500 (1)
  • 500 ft (1)
  • 580 (1)
  • 6 (2)
  • 8 (3)
  • Show More...

• Handle Length

  

  • 4 (1)
  • 48 (4)
  • 48 in (1)
  • Show More...

• Handle Type

  

  • Cushion Grip, Tapered (1)
  • Standard (1)
  • Straight (2)
  • Triangular (1)
  • Wiha-SoftFinish (1)
  • Show More...

• Width

  

  • 1/2 (3)
  • 3/4 (4)
  • Show More...

• Overall Length

  

  • 1 (2)
  • 12 (2)
  • 1-3/4 (1)
  • 1-7/8 (1)
  • 18 (3)
  • 2 (1)
  • 2 ft (1)
  • 2-3/4 (1)
  • 2-3/4 in (1)
  • 250 ft (1)
  • 2-9/16 (4)
  • 3 (2)
  • 3-1/2 (1)
  • 3-3/4 (1)
  • 3-7/8 (1)
  • 4 (6)
  • 4 ft (1)
  • 4 in (1)
  • 4-1/2 (2)
  • 4-3/4 (1)
  • 4-5/8 (1)
  • 5 (2)
  • 5-1/2 (2)
  • 5-3/4 (1)
  • 5-3/8 (1)
  • 54 (3)
  • 5-5/8 (1)
  • 6 (5)
  • 6 in (1)
  • 6-1/2 (1)
  • 7-1/2 in (1)
  • 72 (1)
  • 8 ft (1)
  • Show More...

• Number Of Pieces

  

  • 1 (14)
  • 10 (1)
  • 102 (2)
  • 13 (1)
  • 16 (1)
  • 2 (12)
  • 29 (1)
  • 3 (4)
  • 31 (1)
  • 4 (2)
  • 5 (1)
  • 6 (1)
  • Show More...

• Drive Size

  

  • 1/4 (2)
  • 3/8 (1)
  • 5/16 (3)
  • Show More...

• Weight

  

  • 0.03 lb (1)
  • 0.04 lb (1)
  • 0.07 lb (1)
  • 0.09 lb (2)
  • 0.11 lb (1)
  • 0.17 lb (1)
  • 0.19 lb (3)
  • 0.2 lb (1)
  • 0.22 lb (1)
  • 0.28 lb (1)
  • 0.30 lb (1)
  • 0.31 lb (1)
  • 0.44 lb (1)
  • 0.64 lb (1)
  • 0.94 lb (1)
  • 1 lb (1)
  • 1.5 lb (2)
  • 1.57 lb (1)
  • 12.12 lb (1)
  • 13.5 lb (1)
  • 14 lb (1)
  • 2 lb (1)
  • 26.65 lb (1)
  • 28.25 lb (1)
  • 3 lb (1)
  • 3.77 lb (1)
  • 32.04 lb (1)
  • 38.65 lb (1)
  • 4.05 lb (1)
  • 4.31 lb (1)
  • 4.4 lb (1)
  • 4.53 lb (1)
  • 4.84 lb (1)
  • 4.99 lb (1)
  • 5 lb (1)
  • 5.05 lb (1)
  • 50 lb (1)
  • 9.48 lb (1)
  • Show More...

• Package Quantity

  

  • 1 (Per Pack);5 (Per Carton) (3)
  • 1 BG;10 CT (2)
  • 1 ct (8)
  • 10 Master CT (5)
  • 12 CA (1)
  • 12 CT (10)
  • 12 PK (1)
  • 24 PK (1)
  • 4 CT (2)
  • 5 Master CT (1)
  • 50 CT (1)
  • 6 CT (4)
  • 8 RL/CA (1)
  • Show More...

• Shank Type

  

  • HEX (7)
  • STRAIGHT (8)
  • Show More...

• Diameter

  

  • 3/16 (1)
  • 3/8 (2)
  • Show More...

• Operating Temperature Range

  

  • +50 to +100 °F (1)
  • Maximum of +300 °F (1)
  • Maximum of +450 °F (2)
  • Show More...

• Package Type

  

  • Heavy Duty Carrying Case (1)
  • Industructo Box (2)
  • Show More...

• Category Description

  

  • ADHESIVES (15)
  • AEROSOLS (14)
  • ANCHORS & ANCHOR KITS (1)
  • BITS, BLADES, AND HOLE SAWS (33)
  • CABLE & PIPE TRANSITS (2)
  • CLEANING (4)
  • FASTENERS (6)
  • HAND TOOLS (25)
  • Job Site & Safety Apparel (8)
  • PULL LINE, ROPE, CARRIERS (22)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (3)
  • TAPE (6)
  • TOOL BAG/POUCHES (22)
  • WIRE LUBE, MARKERS, & TIES (1)
  • Show More...

• Construction

  

  • Double Friction Rod (1)
  • High Strength Low Weight (1)
  • Light Weight and Strong (5)
  • M2 High Speed Steel (2)
  • One-Piece Construction (1)
  • Strong Synthetic (6)
  • Show More...

• Type

  

  • 22PCAFJ2G (1)
  • All Purpose Marking Paint (2)
  • Bell Hanger Drill (1)
  • Caulking Gun (1)
  • Clear Coat Marking Paint (1)
  • Compact Combo Bit Kit (1)
  • Construction Marking Paint (8)
  • Cutting Oil (2)
  • Dark Cutting Oil (1)
  • Drill Kit (2)
  • Drill/Tap Kit (1)
  • Duct Seal (2)
  • Economy Wiping Rag (1)
  • Flex A Bit (4)
  • Flexgrip High Dexterity Gloves (3)
  • General Duty Dolly (1)
  • Hand Tote (1)
  • Handi-Foam Expanding Sealant (1)
  • Heavy Duty Nylon Line (1)
  • High Speed Drill (21)
  • Hornet And Wasp Spray (1)
  • Hydraulic Punch Kit (2)
  • Insert Bit (1)
  • K-PVC Cutter (1)
  • Line Package (2)
  • Lock back Razor Knife (1)
  • Long Ship Anger Bit (2)
  • MACHINE SCREW (1)
  • Magnetic Bit Holder (1)
  • Magnetic Hex Tool (8)
  • Masonry Drill (8)
  • Multipurpose Lubricant (1)
  • Nylon Line (1)
  • Off-Line Contact Cleaner (1)
  • Portable Cable Dispenser (1)
  • Post Hole Digger (1)
  • Power Bit (2)
  • Pull Line (1)
  • Pull Line Measuring Tape (6)
  • Pull Rope (5)
  • Quick Stick Rod (1)
  • Ratcheting Punch Tool Kit (1)
  • Ratcheting Screwdriver (1)
  • Reciproblade (1)
  • Replacement Bit (1)
  • ROOF FLASHING (2)
  • Roof Mastic (3)
  • RTV Silicon Sealant (4)
  • Rust Proof Paint (5)
  • Screwdriver Set (2)
  • Shoe Cover (1)
  • Shovel (4)
  • Silicone Lubricant (1)
  • Snaggle Tooth Pro Saw (1)
  • Three Piece Knockout Seal (2)
  • Tip Bit (5)
  • Toggle Bolt (2)
  • Web Strap (12)
  • Wiping Rag (2)
  • Zinc Rich Cold Galvanize Coating (1)
  • Show More...

• Base Type

  

  • Non-Toxic/Asbestos Free (1)
  • Polyurethane (1)
  • Silicone (2)
  • Silicone Rubber (1)
  • Solvent (5)
  • Solvent;Water (1)
  • Water (1)
  • Show More...

• Tensile Strength

  

  • 1130 (1)
  • 1130 lb (1)
  • 1250 (2)
  • 1250 lb (1)
  • 17 (2)
  • 2430 (1)
  • 2500 lb (3)
  • 310 (1)
  • 500 (1)
  • 85 (1)
  • Show More...