Narrow By:

• Manufacturer: AppletonOz

• Product Type

  

  • 1 1/2 FM 7 Body (1)
  • 1 1/2 FM7 Body (4)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 Form 35 Type T THR (1)
  • 1 1/4 FM7 Body (7)
  • 1 1/4 FORM35 Type LB Threa (1)
  • 1 Eys Sealing Unilet-Female (1)
  • 1 In Exp Proof Sealing FTG (1)
  • 1 In FM7 Body (6)
  • 1 In Form 35 Unilet (1)
  • 1 Male Drain Seal (1)
  • 1 Male Seal-Off (1)
  • 1 Mogul Unilet Type C (1)
  • 1 Threaded Unilet (1)
  • 1 Unilet Type FD-1 Gang (1)
  • 1 Unilet Type FD-2 Gang (1)
  • 1/2 FM7 Body (5)
  • 1/2 Form 35 TB Threaded Unilet (1)
  • 1/2 Form 35 Type T THR (1)
  • 1/2 Form 35 Unilet (1)
  • 1/2 Form 35 Unilet (A) (1)
  • 1/2 STL FM7 Cover Assy (1)
  • 1/2 Type FS Thread Unilet (1)
  • 1/2 Type FSC Thread Unilet (1)
  • 1-1/2 In Form 35 Unilet (1)
  • 1-1/2 Male Seal-Off (1)
  • 1-1/2 STL FM7 Cover Assy (1)
  • 1-1/4 Form 35 Type T THR (1)
  • 1-1/4 In Vert Sealing Fitting (1)
  • 1-1/4 Male Seal-Off (1)
  • 1-1/4 STL FM7 Cover Assy (1)
  • 1-Gang Duplex Receptacle Cover (1)
  • 2 1/2 -3 FM 7 Cover Assem (1)
  • 2 FM7 Body (4)
  • 2 FM7 Body (A) (1)
  • 2 FM7 Cover Assembly (1)
  • 2 Form 35 Type T THR U (1)
  • 2 In Form 35 Unilet (1)
  • 2 Male Seal-Off (1)
  • 2 Type LB Form 35 THR U (1)
  • 3/4 FM 7 Cover Assembly (1)
  • 3/4 FM7 Body (1)
  • 3/4 Form 35 Type LL THR (1)
  • 3/4 Form 35 Type LR THR (1)
  • 3/4 LL FM7 Body (App) (1)
  • 3/4 LR FM7 Body (App) (1)
  • 3/4 TB FM7 Body (App) (1)
  • 3/4 Threaded Unilet 2-Gang (1)
  • 3/4 Type FD Thread Unilet (1)
  • 3/4 Type FDC Thread Unilet (1)
  • 3/4 Type GRJS Expl Proof (1)
  • 3/4 X FM7 Body (App) (1)
  • 3-1/2 In Iron Cond Body Type T (1)
  • Cast Cover SQ HNDL TGL SW (1)
  • Conduit Body (2)
  • Conduit Outlet Body (8)
  • Conduit Seal Body (5)
  • Cover (5)
  • Cover FS + FD / Gang (1)
  • Device Box (3)
  • FM7 Cover Gasket 1/2 (1)
  • Sealing Fit'G Exp-Proof 1/2 (1)
  • Single Gang Steel Cover (1)
  • Single Gang Threaded Unilet (2)
  • Stamped Cover (3)
  • Threaded 2 Gang Unilet (1)
  • Threaded Unilet (4)
  • Threaded Unilet (A) (1)
  • Threaded Unilet 1 (2)
  • Threaded Unilet 1 Gang (1)
  • Threaded Unilet 3/4 (1)
  • Uni Form 35 11/2 Thread (A) (1)
  • Unilet 1 Threaded (1)
  • Unilet 3/4 THRD 3 Gang (1)
  • Unilet 3/4 Threaded 2 Gang (1)
  • Unilet Form 35 1 1/4 Threaded (1)
  • Unilet Form 35 1 In Threaded (1)
  • Unilet Form 35 1 Threaded (2)
  • Unilet Form 35 1/2 In Threaded (1)
  • Unilet Form 35 1/2 THR (1)
  • Unilet Form 35 1/2 THR (A) (1)
  • Unilet Form 35 11/2 THR (1)
  • Unilet Form 35 1-1/4 In (2)
  • Unilet Form 35 2 In Threaded (1)
  • Unilet Form 35 2 Thread (1)
  • Unilet Form 35 3/4 In Threaded (1)
  • Vaporproof Cover (1)
  • Vaporproof Cover SGL Gang (1)
  • Vaporproof Cover SGL Gang M(A) (1)
  • Show More...

• Brand

  

  • Appleton (135)
  • Appleton/Oz Gedney (2)
  • O-Z/GEDNEY (1)
  • Show More...

• Trade Size

  

  • 1 in (6)
  • 1/2 in (2)
  • 1-1/2 in (1)
  • 1-1/4 in;1-1/2 in (1)
  • 2 in (2)
  • 3/4 in (13)
  • Show More...

• Finish

  

  • Epoxy Powder Coated Dichromate Zinc Electro-Plated (2)
  • Triple-Coat (Electro Zinc Plated, Chromate And Epoxy Powder Coat) (9)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (77)
  • Zinc Electroplate (5)
  • Zinc Electroplated (16)
  • Zinc Electroplated Chromate Epoxy Powder Coated (2)
  • Zinc Electro-Plated Chromate Epoxy Powder Coated (2)
  • Zinc Electro-Plated;Dichromate;Epoxy Powder Coated (1)
  • Show More...

• Body Type

  

  • Conduit Seal (5)
  • Form 35 (13)
  • Form 7 (5)
  • Show More...

• Shape

  

  • C (1)
  • LB (4)
  • Shallow (2)
  • T (3)
  • TB (2)
  • Show More...

• Connection Type

  

  • Female (3)
  • Female Threaded (2)
  • Male x Female (2)
  • Threaded (10)
  • Show More...

• Capacity

  

  • 10 cu.in (1)
  • 18 cu.in (2)
  • 7 cu.in (1)
  • Show More...

• Number Of Hubs

  

  • 1 (2)
  • 2 (6)
  • 3 (5)
  • Show More...

• Hub Size

  

  • 1 (16)
  • 1/2 (14)
  • 1-1/2 (15)
  • 1-1/4 (13)
  • 1-1/4 - 1-1/2 (1)
  • 2 (14)
  • 2 in (1)
  • 2-1/2 - 3 (1)
  • 3/4 (10)
  • 3/4 in (10)
  • 3-1/2 (1)
  • Show More...

• Length

  

  • 10.56 (3)
  • 11.63 (2)
  • 2 in (1)
  • 3.5 in (1)
  • 3.63 in (1)
  • 3.69 in;93.7 mm (2)
  • 4.25 in (1)
  • 4.56 (3)
  • 4.63 (3)
  • 5.19 (3)
  • 5.38 (6)
  • 5.63 (1)
  • 6 (4)
  • 6.06 in (2)
  • 6-1/2 (3)
  • 6-1/4 (6)
  • 7 (1)
  • 7.13 (5)
  • 7.13 in (1)
  • 7.44 (4)
  • 7-1/4 (2)
  • 8.13 (3)
  • 8.19 (10)
  • 9.19 (4)
  • 9.81 (1)
  • Show More...

• Hub Location

  

  • 90º (4)
  • Straight (1)
  • Tee Side (5)
  • Show More...

• Width

  

  • 1.25 in;31.7 mm (1)
  • 1.31 (2)
  • 1.38 (1)
  • 1.38 in (2)
  • 1.5 in;38.1 mm (1)
  • 1.56 (1)
  • 1.56 in (2)
  • 1.75 in (1)
  • 1.81 (2)
  • 1.88 (1)
  • 1-3/4 (1)
  • 2 (3)
  • 2.19 (4)
  • 2.38 (1)
  • 2.44 (5)
  • 2.56 (2)
  • 2.63 (1)
  • 2.69 (1)
  • 2.81 in (2)
  • 2.88 (1)
  • 2-1/2 (2)
  • 2-1/4 (2)
  • 2-3/4 (2)
  • 3 (2)
  • 3.13 (2)
  • 3.19 (3)
  • 3.38 (1)
  • 3.56 (1)
  • 3-1/2 (7)
  • 4.06 (2)
  • 4.13 (2)
  • 4.19 (2)
  • 4.63 (1)
  • 4-1/2 (2)
  • 5-1/4 (1)
  • Show More...

• Height

  

  • 1.38 (1)
  • 1.44 (1)
  • 1.63 (1)
  • 1.69 (1)
  • 1.88 (1)
  • 1.94 (1)
  • 1.94 in (1)
  • 1-1/2 (1)
  • 1-3/4 (2)
  • 2 (3)
  • 2 in (1)
  • 2.13 (1)
  • 2.31 (3)
  • 2.31 in (1)
  • 2.56 (5)
  • 2.69 in (1)
  • 2.88 (2)
  • 2-1/2 (1)
  • 2-1/4 (3)
  • 2-3/4 (4)
  • 3.13 (1)
  • 3.31 (2)
  • 3.38 (3)
  • 3.56 (1)
  • 3.63 (1)
  • 3.69 (1)
  • 3.75 in (1)
  • 3-1/4 (1)
  • 4.19 (1)
  • 4.63 (1)
  • 4-1/4 (1)
  • 5.19 (1)
  • 5.88 in (2)
  • Show More...

• Configuration

  

  • C (1)
  • LB (4)
  • T (3)
  • TB (2)
  • Show More...

• Includes

  

  • Internal Ground Screw (2)
  • Stainless Steel Fastening Screw (5)
  • Stainless Steel Screw (3)
  • Show More...

• Mounting Type

  

  • Box Mount (2)
  • Horizontal Mount/Vertical Mount (3)
  • Screw (8)
  • Threaded (10)
  • Vertical Mount (3)
  • Show More...

• For Use With

  

  • Duplex Flush Receptacle with Spring Cover Mounting BOX (1)
  • Form35(R) Unilet(R) Conduit Outlet Body (5)
  • Rigid Steel;Rigid Aluminum and IMC Conduit (9)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (4)
  • Threaded Metal Conduit;IMC Conduit (2)
  • Threaded Rigid Met (1)
  • Threaded Rigid Metal Conduit and IMC (4)
  • Show More...

• Special Features

  

  • Accommodate wiring devices such as switches and receptacles;Accurately tapped, tapered threads for tight, rigid joints, ground continuity;Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit;Corrosion-resistant ideal for indoor and outdoor installations;Internal grounding screws standard;Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock;Permit access to conductors for maintenance;Provide excellent service i (19)
  • Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Compact round box for use where space is limited;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant: ideal indoors or out;Explosionproof, dust-ignitionproof, raintight;For pulling of wires;Furnished with copperfree (4/10 of 1 PCT maximum) aluminum epoxy powder coat cover;Furnished with internal ground screw;General purpose wiring;Inter (1)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers;Connect and change direction of conduit runs;Equivalent FM7 and Form 7 units have identical applications and installation dimensions;Fits flush and snug against flat surfaces for more stable installation;Flat back design provides greater cubic content for easier wire pulling and more room for splicing;Hub (35)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Exclusive built-in easy-pulling rollers to facilitate cable pulling through hubs and help eliminate cable damage;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Si (4)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Sizes with flat-back design ideal where fitting is mounted flat against surface;Smooth, rounded integral bushings i (29)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Close radius type for sealing vertical or horizontal con;Explosionproof, dust-ignitionproof, raintight;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Covers have captive stainless steel screws to speed installation, prevent freezing of screws;Larger body size facilitates pulling of large and heavy conductors;Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds eight times the trade diameter of the conduit per NEC 314.28(A)(1);Smooth, rounded integral bushing in each hub protects conductor insulation;Specially designed raised cast covers (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof, raintight;F;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps;Required in Class I, Division 1 and 2 locat (8)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof, raintight;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps;Required in Class I, Division 1 and 2 locatio (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.4 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.8 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 3 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 4.8 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 9.7 CU-IN as per NEC 314.16(A) (1)
  • Corrosion Resistant;Weatherproof;Rain Tight;Dust Tight (3)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws (1)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Dry Location;Less gasket (2)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Less gasket (2)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Wet location (2)
  • Explosionproof;Dust Ignitionproof;Rain Tight (3)
  • Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant;High Impact Resistant;Shock Resistant (1)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (5)
  • Neoprene (1)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Easier Wire Pulling and More Room for Sp (2)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant (7)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Show More...

• Application

  

  • For FM7 Unilet Conduit Outlet Bodies (6)
  • For Form 35 Unilet Conduit Outlet Bodies (5)
  • For use with 0.50 inch FM7 conduit bodies. Seals and protects. (1)
  • For Use With Rigid Metal Conduit And IMC (1)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (68)
  • For Use With Square Handle Toggle Switches (1)
  • For Use With Square Handle Tumbler Or Toggle Switches (2)
  • For Use With Standard 2 Or 3 Wire Duplex Receptacles (2)
  • For Use With Threaded Metal Conduit (1)
  • For Use With Threaded Metal Conduit And IMC (19)
  • For Use With Threaded Rigid Metal Conduit and IMC (8)
  • For Use With Tumbler Switches With Square Handles (1)
  • For Use With Unilets FS And FD Single Gang And Tandem Cast Hub Ridge Top Boxes (1)
  • Hazardous Location (5)
  • Serve as Pulling Fittings;Make Bends in Conduit System;Provide Openings for Splicing;Connect and Change Direction of Conduit Runs;Allow Connections for Branch Runs;Permit Access to Conductors for Maintenance (10)
  • Wet Location (3)
  • Wiring Device;Conductor (1)
  • Wiring Device;Conductor;Indoor or Outdoor (2)
  • Show More...

• Package Quantity

  

  • 1 CT;10 PK (1)
  • 10 CT (2)
  • 20 CT;100 PK (1)
  • 25 CT;100 PK (2)
  • 25 PK;1 CT (2)
  • 25 PK;5 CT (2)
  • 3 CT;15 PK (1)
  • 5 CT;20 PK (2)
  • 5 CT;25 PK (3)
  • 5 CT;50 PK (5)
  • 50 CT;200 PK (3)
  • 50 PK;1 CT (1)
  • 50 PK;5 CT (1)
  • Show More...

• Weight

  

  • 0.04 lb/EA (1)
  • 0.13 lb/EA (1)
  • 0.18 lb/EA (2)
  • 0.26 lb/EA (1)
  • 0.37 lb/EA (1)
  • 0.55 lb/EA (1)
  • 0.65 lb/EA (1)
  • 0.8 lb/EA (1)
  • 0.86 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1.06 lb/EA (1)
  • 1.17 lb/EA (1)
  • 1.2 lb/EA (1)
  • 1.25 lb/EA (1)
  • 1.41 lb/EA (1)
  • 1.5 lb/EA (2)
  • 1.72 lb/EA (1)
  • 1.8 lb/EA (1)
  • 1.9 lb/EA (1)
  • 2 lb/EA (2)
  • 2.08 lb/EA (1)
  • 2.22 lb/EA (1)
  • 4.07 lb/EA (1)
  • Show More...

• Category Description

  

  • FORM 5 CONDULETS, COVERS, & GASKETS (44)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (49)
  • FS BOXES AND COVERS (27)
  • Fuses & Fuse Accessories (3)
  • HAZARDOUS LOCATION FITTINGS (14)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (1)
  • Show More...

• Material

  

  • Grayloy-Iron (8)
  • Malleable Iron (33)
  • Steel (2)
  • Show More...

• Mounting

  

  • BOX (8)
  • Screw-In (14)
  • Show More...

• Size

  

  • 1 (13)
  • 1/2 (5)
  • 1-1/2 (1)
  • 1-1/4 (1)
  • 2 (1)
  • 3/4 (13)
  • Show More...

• Type

  

  • 1-Gang Box Cover (2)
  • 1-Gang Cast Cover (3)
  • 1-Gang Operating Type Cast Cover (1)
  • Blank Clip Cover With Screw (9)
  • Blank Cover With Screw (5)
  • Cast Cover (2)
  • EY Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting (2)
  • EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple (1)
  • EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting With Removable Nipple (6)
  • EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting (3)
  • EYS Series 25 PCT Fill Vertical Sealing Fitting With Removable Nipple (1)
  • FD Deep Depth 1-Gang Cast Device Box (2)
  • FD Deep Depth 2-Gang Cast Device Box (1)
  • FDC Deep Depth 1-Gang Cast Device Box (2)
  • FDCT Deep Depth 1-Gang Cast Device Box (2)
  • FDT Deep Depth 1-Gang Cast Device Box (2)
  • FDX Deep Depth 1-Gang Cast Device Box (2)
  • FS Shallow Depth 1-Gang Cast Device Box (3)
  • FS Shallow Depth 2-Gang Cast Device Box (2)
  • FSC Shallow Depth 1-Gang Cast Device Box (3)
  • FSC Shallow Depth 2-Gang Cast Device Box (1)
  • FSS Shallow Depth 3-Gang Cast Device Box (1)
  • Gasket for use with FM7 conduit bodies. (1)
  • Type C Conduit Outlet Body (10)
  • Type C NEC 8X Conduit Outlet Body With Assembled Cover And Gasket (1)
  • Type LB Conduit Outlet Body (12)
  • Type LL Conduit Outlet Body (12)
  • Type LR Conduit Outlet Body (12)
  • Type T Conduit Outlet Body (13)
  • Type TB Conduit Outlet Body (10)
  • Type X Conduit Outlet Body (9)
  • Universal Outlet Box (1)
  • Show More...

• Cable Entry

  

  • (1) 1 IN Hub (3)
  • (1) 1/2 IN Hub (2)
  • (1) 3/4 IN Hub (3)
  • (2) 1 IN Hub (2)
  • (2) 1/2 IN Hub (1)
  • (2) 3/4 IN Hub (4)
  • (3) 1 IN Hub (2)
  • (3) 3/4 IN Hub (2)
  • (4) 1 IN Hub (1)
  • (4) 3/4 IN Hub (1)
  • (5) 3/4 IN GRJS Hub (1)
  • Show More...