Products by Minnesota Mining (3M) (9)
Products by Minnesota Mining (3M) (9)
307-315 of 328
5384 - 3M

3M™ Motor Lead Pigtail Splicing Kits 5380 Series Are Designed For Splicing Motor Lead Cables to Incoming Feeder Cables. These Kits Are Removable and Reusable. These Kits Can Accommodate Pigtail (Stub) Connections, 5/8 KV Shielded and Non-Shielded Feeders. The Splice’S Main Component, The Slip-On Splice Cover, Is Made From Epdm Rubber. Mastic Is Used For The Moisture Seal On The Pigtail Kits. The Kits Utilize A High Dielectric Constant (K) Stress Control Termination For The Feeder Cable’S Electrical Stress

  • MFR Part #: 5384
  • Nacogdoches Availability: 0
  • Total Availability: 0
  • Manufacturer: 3M
  • Find: Similar Items
  • Pkg Sizes: 1 ($1,106.00) ·
5384 - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$1,106.00

Each

QTY:
Each
Add
5513A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

  • MFR Part #: 5513A
  • Nacogdoches Availability: 0
  • Total Availability: 0
5513A - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$833.84

Each

QTY:
Each
Add
5515A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

  • MFR Part #: 5515A
  • Nacogdoches Availability: 0
  • Total Availability: 0
5515A - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$944.76

Each

QTY:
Each
Add
5516A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

  • MFR Part #: 5516A
  • Nacogdoches Availability: 0
  • Total Availability: 0
  • Manufacturer: 3M
  • Find: Similar Items
  • Pkg Sizes: 1 ($1,170.71) ·
5516A - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$1,170.71

Each

QTY:
Each
Add
5535A - 3M

3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 5535A and 5536A Series Are Inline Splices For Joining 35 KV Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. The Cold Shrink Splice Body Is A One-Piece Molded Design Made Of Specially Formulated Silicone Rubbers, While The Jacketing Is Made Of Epdm Rubber For Its Special Physical Properties.

  • MFR Part #: 5535A
  • Nacogdoches Availability: 0
  • Total Availability: 0
  • Manufacturer: 3M
  • Find: Similar Items
  • Pkg Sizes: 1 ($1,545.77) ·
5535A - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$1,545.77

Each

QTY:
Each
Add
55513CAC - 3M

3M™ Cold Shrink/Armorcast, Armored or Non-Armored Splice Kit 5551-3C-Ac Is For Splicing 3/C, 5/8 KV Shielded, Armored and Non-Armored Cables. Connectors Are Not Included. Kits Include Armorcast Structural Material to Reconstitute The Cable’S Armor. Meets The Requirements Of Ieee 404. Each Kit Makes One 3/C Splice. Note: Cable Sizes Shown Below Are For Standard Insulation Thickness. Final Determining Factor Is Cable Insulation O.D.

  • MFR Part #: 55513CAC
  • Nacogdoches Availability: 0
  • Total Availability: 0
  • Manufacturer: 3M
  • Find: Similar Items
  • Pkg Sizes: 1 ($1,732.20) ·
55513CAC - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$1,732.20

Each

QTY:
Each
Add
5552 - 3M

3M™ Cold Shrink Shielded Splice Kit 5550 Series Are For Splicing 5 KV and 8 KV Shielded, Solid Dielectric, Power Cables. Meets Requirements Of Ieee 404. Each Kit Contains All The Materials (Except Connectors and Optional Ground Strap) Required to Construct Three (3) Single Conductor Splices On Tape Shield, Wire Shield or Unishield® Cables. Note: The Kit Can Also Be Used to Splice A Shielded to A Non-Shielded 5/8 KV Cable. Note: Cable Sizes Shown Below Are For Standard Insulation Thickness. Final Determinin

  • MFR Part #: 5552
  • Nacogdoches Availability: 0
  • Total Availability: 0
  • Manufacturer: 3M
  • Find: Similar Items
  • Pkg Sizes: 1 ($1,722.23) ·
5552 - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$1,722.23

Each

QTY:
Each
Add
5733 - 3M

These Kits Are Applicable For Indoor and Outdoor Installations, Including Direct Burial, Aerial and Submersible Applications. Each Kit Requires At Least 1 Roll Of 3M™ Armorcast Structural Material. For Use With 3/C or 4/C Armor Power Cable (Teck-90) Up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series Accommodates A Full Range Of Cable Sizes From 14 Awg–750 Kcmil. The Overall Jacket Diameter Ranges From 0.62–4.00 (16–10• MM). Notes:• Connectors Are Not Included In The Kit. Use Only Csa Certified Compressio

  • MFR Part #: 5733
  • Nacogdoches Availability: 0
  • Total Availability: 0
5733 - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$442.69

Each

QTY:
Each
Add
5742 - 3M

The 3M™ Cold Shrink Splicing Products Are Designed Using The Proprietary Cold Shrink Delivery System Developed By 3M. Products Are Supplied Prestretched On A Removable Core For Efficiency and Ease Of Installation. 3M™ Cold Shrink Splices 5740 Series Are Used For Single Conductor, Non-Shielded 5/8 KV Cables.Each Kit Is A Cold Shrink Design and Contains Enough Material to Insulate Three Splices. Connectors Are Not Included and Must Be Ordered Separately.Note: Cable Sizes Shown Below Are For Standard Insulati

  • MFR Part #: 5742KIT
  • Nacogdoches Availability: 0
  • Total Availability: 0
5742 - Minnesota Mining (3M)

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$340.66

Each

QTY:
Each
Add
5384 - 3M

3M™ Motor Lead Pigtail Splicing Kits 5380 Series Are Designed For Splicing Motor Lead Cables to Incoming Feeder Cables. These Kits Are Removable and Reusable. These Kits Can Accommodate Pigtail (Stub) Connections, 5/8 KV Shielded and Non-Shielded Feeders. The Splice’S Main Component, The Slip-On Splice Cover, Is Made From Epdm Rubber. Mastic Is Used For The Moisture Seal On The Pigtail Kits. The Kits Utilize A High Dielectric Constant (K) Stress Control Termination For The Feeder Cable’S Electrical Stress

MFR Part #:
5384
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($1,106.00)
5513A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

MFR Part #:
5513A
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($833.84)
5515A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

MFR Part #:
5515A
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($944.76)
5516A - 3M

The 3M™ Cold Shrink QS-Iii Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series Are 15 KV Class Inline Splices For Joining Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. It Is A Cold Shrink Design Sized to Fit Type MV-90 or Type MV-105 Cables With Copper, or Aluminum Conductor Sizes Ranging From 2 Awg-1000 Kcmil (35-500 MM²).

MFR Part #:
5516A
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($1,170.71)
5535A - 3M

3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 5535A and 5536A Series Are Inline Splices For Joining 35 KV Tape Shield, Wire Shield, Unishield® or Longitudinally Corrugated (LC) Shielded Power Cables. The Cold Shrink Splice Body Is A One-Piece Molded Design Made Of Specially Formulated Silicone Rubbers, While The Jacketing Is Made Of Epdm Rubber For Its Special Physical Properties.

MFR Part #:
5535A
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($1,545.77)
55513CAC - 3M

3M™ Cold Shrink/Armorcast, Armored or Non-Armored Splice Kit 5551-3C-Ac Is For Splicing 3/C, 5/8 KV Shielded, Armored and Non-Armored Cables. Connectors Are Not Included. Kits Include Armorcast Structural Material to Reconstitute The Cable’S Armor. Meets The Requirements Of Ieee 404. Each Kit Makes One 3/C Splice. Note: Cable Sizes Shown Below Are For Standard Insulation Thickness. Final Determining Factor Is Cable Insulation O.D.

MFR Part #:
55513CAC
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($1,732.20)
5552 - 3M

3M™ Cold Shrink Shielded Splice Kit 5550 Series Are For Splicing 5 KV and 8 KV Shielded, Solid Dielectric, Power Cables. Meets Requirements Of Ieee 404. Each Kit Contains All The Materials (Except Connectors and Optional Ground Strap) Required to Construct Three (3) Single Conductor Splices On Tape Shield, Wire Shield or Unishield® Cables. Note: The Kit Can Also Be Used to Splice A Shielded to A Non-Shielded 5/8 KV Cable. Note: Cable Sizes Shown Below Are For Standard Insulation Thickness. Final Determinin

MFR Part #:
5552
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($1,722.23)
5733 - 3M

These Kits Are Applicable For Indoor and Outdoor Installations, Including Direct Burial, Aerial and Submersible Applications. Each Kit Requires At Least 1 Roll Of 3M™ Armorcast Structural Material. For Use With 3/C or 4/C Armor Power Cable (Teck-90) Up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series Accommodates A Full Range Of Cable Sizes From 14 Awg–750 Kcmil. The Overall Jacket Diameter Ranges From 0.62–4.00 (16–10• MM). Notes:• Connectors Are Not Included In The Kit. Use Only Csa Certified Compressio

MFR Part #:
5733
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($442.69)
5742 - 3M

The 3M™ Cold Shrink Splicing Products Are Designed Using The Proprietary Cold Shrink Delivery System Developed By 3M. Products Are Supplied Prestretched On A Removable Core For Efficiency and Ease Of Installation. 3M™ Cold Shrink Splices 5740 Series Are Used For Single Conductor, Non-Shielded 5/8 KV Cables.Each Kit Is A Cold Shrink Design and Contains Enough Material to Insulate Three Splices. Connectors Are Not Included and Must Be Ordered Separately.Note: Cable Sizes Shown Below Are For Standard Insulati

MFR Part #:
5742KIT
Manufacturer:
3M
Local Availability:
Out Of Stock
Total Availability:
0 Each
Pkg Sizes:
1 Each ($340.66)

Begin Live Chat