Products by Nsi Industries (9)
Products by Nsi Industries (9)
433-441 of 500
IPLMD2503 - Nsi

The Polaris IPLMD250-3 Multi-Tap Mountable Dual-Sided Entry Connector Features 3 Ports Sized For 250 MCM - 6 Awg Wires. Mounting Holes On Either Side Of The Connector Allow For Direct Mounting to Troughs, Panels or Wireways With 1/4€ Bolts. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, With

  • MFR Part #: IPLMD250-3
  • Nacogdoches Availability: 0
  • Total Availability: 1
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($272.32) ·
IPLMD2503 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$136.16

Each

QTY:
Each
Add
ISE73 - Nsi

Pre-Insulated Service Entry Sleeves 1-2 STR: Pre-Insulated Service Entry Sleeves Are Used For Fast and Easy Installation With Standard Tools. For Combinations Of Aluminum-Aluminum and Aluminum-Copper Conductors. Meets The Requirements Of Ansi C119.4. Rated 600 Volts.

  • MFR Part #: ISE73
  • Nacogdoches Availability: 0
  • Total Availability: 8
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($213.42) ·
ISE73 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$426.84

Per 100

QTY:
Each
Add
ISPB3503 - Nsi

The Polaris ISPB350-3 Multi-Tap Direct Burial Single-Sided Entry Connector Features 3 Ports Sized For 350 MCM - 12 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrenc

  • MFR Part #: ISPB350-3
  • Nacogdoches Availability: 0
  • Total Availability: 2
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($112.76) ·
ISPB3503 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$56.38

Each

QTY:
Each
Add
ISPB3506 - Nsi

The Polaris ISPB350-6 Multi-Tap Direct Burial Single-Sided Entry Connector Features 6 Ports Sized For 350 MCM - 12 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrenc

  • MFR Part #: ISPB350-6
  • Nacogdoches Availability: 0
  • Total Availability: 12
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($207.94) ·
ISPB3506 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$103.97

Each

QTY:
Each
Add
ISW1 - Nsi Industries

Splicer, In Line; 600 V; Direct Burial Cable; 2 to 1 Awg Conductor; Cable Insulation Outer Diameter 0.352 to 0.582 Inch; Approval Ul 486D; Polaris Blue Brand; Isw Model

  • MFR Part #: ISW-1
  • Nacogdoches Availability: 0
  • Total Availability: 4
  • Manufacturer: Nsi Industries
  • Find: Similar Items
  • Pkg Sizes: 12 ($308.40) ·
ISW1 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$25.70

Each

QTY:
Each
Add
ISW30 - Nsi Industries

Splicer, In Line; 600 V; Direct Burial Cable; 1/0 to 3/0 Awg Conductor; Cable Insulation Outer Diameter 0.462 to 0.72 Inch; Approval Ul 486D; Polaris Blue[T] Brand; Isw Model

  • MFR Part #: ISW-3/0
  • Nacogdoches Availability: 0
  • Total Availability: 1
  • Manufacturer: Nsi Industries
  • Find: Similar Items
  • Pkg Sizes: 4 ($125.84) ·
ISW30 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$31.46

Each

QTY:
Each
Add
ITH750 - Nsi

The Polaris Ith-750 Multi-Tap Dual-Sided Entry Connector Features 2 Ports Sized For 750 MCM - 1/0 Awg Wires. The Heavy-Duty Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Each Port Has Two Pressure Screws to Ensure The Best Connection Possible In Demanding Applications. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additi

  • MFR Part #: ITH-750
  • Nacogdoches Availability: 0
  • Total Availability: 27
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($518.61) ·
ITH750 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$172.87

Each

QTY:
Each
Add
L356 - Nsi

1 Hole Long Barrel Copper Compression Lug 3 Awg - 5/16" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L356
  • Nacogdoches Availability: 0
  • Total Availability: 44
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($332.68) ·
L356 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$665.37

Per 100

QTY:
Each
Add
L75058 - Nsi

1 Hole Long Barrel Copper Compression Lug 750 MCM - 5/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L75058
  • Nacogdoches Availability: 0
  • Total Availability: 36
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($146.68) ·
L75058 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$4,889.17

Per 100

QTY:
Each
Add
IPLMD2503 - Nsi

The Polaris IPLMD250-3 Multi-Tap Mountable Dual-Sided Entry Connector Features 3 Ports Sized For 250 MCM - 6 Awg Wires. Mounting Holes On Either Side Of The Connector Allow For Direct Mounting to Troughs, Panels or Wireways With 1/4€ Bolts. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, With

MFR Part #:
IPLMD250-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
1 Each
Pkg Sizes:
2 Each ($272.32)
ISE73 - Nsi

Pre-Insulated Service Entry Sleeves 1-2 STR: Pre-Insulated Service Entry Sleeves Are Used For Fast and Easy Installation With Standard Tools. For Combinations Of Aluminum-Aluminum and Aluminum-Copper Conductors. Meets The Requirements Of Ansi C119.4. Rated 600 Volts.

MFR Part #:
ISE73
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
8 Each
Pkg Sizes:
50 Each ($213.42)
ISPB3503 - Nsi

The Polaris ISPB350-3 Multi-Tap Direct Burial Single-Sided Entry Connector Features 3 Ports Sized For 350 MCM - 12 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrenc

MFR Part #:
ISPB350-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
2 Each
Pkg Sizes:
2 Each ($112.76)
ISPB3506 - Nsi

The Polaris ISPB350-6 Multi-Tap Direct Burial Single-Sided Entry Connector Features 6 Ports Sized For 350 MCM - 12 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrenc

MFR Part #:
ISPB350-6
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
12 Each
Pkg Sizes:
2 Each ($207.94)
ISW1 - Nsi Industries

Splicer, In Line; 600 V; Direct Burial Cable; 2 to 1 Awg Conductor; Cable Insulation Outer Diameter 0.352 to 0.582 Inch; Approval Ul 486D; Polaris Blue Brand; Isw Model

MFR Part #:
ISW-1
Manufacturer:
Nsi Industries
Local Availability:
Out Of Stock
Total Availability:
4 Each
Pkg Sizes:
12 Each ($308.40)
ISW30 - Nsi Industries

Splicer, In Line; 600 V; Direct Burial Cable; 1/0 to 3/0 Awg Conductor; Cable Insulation Outer Diameter 0.462 to 0.72 Inch; Approval Ul 486D; Polaris Blue[T] Brand; Isw Model

MFR Part #:
ISW-3/0
Manufacturer:
Nsi Industries
Local Availability:
Out Of Stock
Total Availability:
1 Each
Pkg Sizes:
4 Each ($125.84)
ITH750 - Nsi

The Polaris Ith-750 Multi-Tap Dual-Sided Entry Connector Features 2 Ports Sized For 750 MCM - 1/0 Awg Wires. The Heavy-Duty Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Each Port Has Two Pressure Screws to Ensure The Best Connection Possible In Demanding Applications. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additi

MFR Part #:
ITH-750
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
27 Each
Pkg Sizes:
3 Each ($518.61)
L356 - Nsi

1 Hole Long Barrel Copper Compression Lug 3 Awg - 5/16" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L356
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
44 Each
Pkg Sizes:
50 Each ($332.68)
L75058 - Nsi

1 Hole Long Barrel Copper Compression Lug 750 MCM - 5/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L75058
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
36 Each
Pkg Sizes:
3 Each ($146.68)

Begin Live Chat