Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (2)
  • 12-10 Awg Vinyl Insulated Locking Spade, 50 Per Pack (3)
  • 2 Position Bridge (2)
  • 3/4" Staples Plastic Insulated 2 Conductor Romex 12-3 (2)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (4)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (10)
  • 3M™ Cold Shrink End Caps Ec Series (4)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (2)
  • 3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 551 (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (2)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-S, 7680-S & 7690 (10)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-T & 7690-T Serie (9)
  • 3M™ Heat Shrink Cable Breakout Boot (3)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (8)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (22)
  • 3M™ Motor Lead Pigtail Splice Kits 5316-5319 (2)
  • 3M™ Motor Lead Pigtail Splice Kits, 1-Hole Lug Connections 5 (5)
  • 3M™ Rejacketing Sleeves RJS Series (5)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchcode™ Wire Marker Tape Dispenser STD (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (11)
  • 3M™ Scotchcode™ Wire Marker Write-On Dispensers (3)
  • 3M™ Scotchflex™ Cable Tie Base (2)
  • 3M™ Splice Kit Uf (3)
  • 3M™ Standard Nylon Cable Ties (4)
  • Aluminum to Copper Lug (1)
  • Automatic Tension Splice Connector (2)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Barrier Strip (3)
  • Beam Clamp (3)
  • Black Fine Point Marker (2)
  • Black Medium Point Marker (2)
  • Butt Splice Connector (2)
  • Cable Connector (2)
  • Cable Holder (1)
  • Cable Hook (2)
  • Cable Splice Kit (1)
  • Cable Staple (12)
  • Cable Tie (58)
  • Cable Tie Mount (4)
  • Cable Tie Mounting Base (9)
  • Ceiling Wire (1)
  • Clip, Conduit, (4)
  • CMP Lug Cu Long 6 Awg 1/4 BLT 5/8 SPC (2)
  • Compression (7)
  • Compression Connector (7)
  • Compression Lug (9)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conductor Lug (11)
  • Conduit Fastener (1)
  • Conduit Support (1)
  • Conduit to Beam Fastener (3)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to Conduit Fastener (2)
  • Conduit to Rod FS, Guide-Rite, 1/2", 3/4" Conduit Size (2)
  • Copper Comp. Lug, 2 Hole, #2 Awg Flex, 1 (2)
  • Copper Compression Lug (5)
  • C-Type Copper Compression Tap (8)
  • Distribution Block (1)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Easy-Splice Roll On (2)
  • Electrical Tape (9)
  • End Cover (1)
  • End Section (1)
  • Flat Washer (1)
  • Flex Lug (2)
  • Flexible Component Label (2)
  • Friction Tape (2)
  • Ground Connector (3)
  • Heat Shrink Label (1)
  • Heat Shrink Splice (1)
  • Heat Shrink Tube (3)
  • Heat Shrink Tubing (1)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Bolt (1)
  • Hex Nut (1)
  • Inline Resin Splicing Kits (2)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Staples (4)
  • Insulation Piercing Connector (1)
  • Insulation-Tap Connector (9)
  • Jack Chain (1)
  • J-Hook with Retainer (1)
  • Label (3)
  • Label Polyester 0.75IN X 21FT BK/WT (2)
  • Label Vinyl 0.75IN X 21FT BK/WT (2)
  • Linerless Rubber Tape (4)
  • Lock Washer (1)
  • Long Barrel Lug (11)
  • Low Voltage Splice (1)
  • Lug (1)
  • Machine Screw (1)
  • Marker (1)
  • Marker Card (1)
  • Mechanical (61)
  • Mechanical Connector (12)
  • Mechanical Grounding Connector (1)
  • Mechanical Lug (1)
  • Molds (2)
  • Motor Lead Pigtail Splicing Kit (1)
  • Multi-Cable Staple (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • No Twist SQ Washer, 7/16" Hole, 3/8" Bolt, ZN PLTD (2)
  • Non-Metallic Cable Connector (2)
  • Nylon Label (2)
  • P1™ Heat Shrink Label (3)
  • Panelboard Lug (1)
  • Plastic Insulated Staple (4)
  • Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Tap C (2)
  • Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Tap CO (2)
  • Power Cable Splice Cover (4)
  • Power Cable Termination (4)
  • Power Distribution Block (9)
  • Pre-Printed Wire Marker Book (2)
  • Purlin Clip (2)
  • Push-In Connector (3)
  • Push-in Wire Connector (2)
  • Rebar Clamp (1)
  • Ring Tongue Compression Terminal (4)
  • Rod & Wire FS (2)
  • Scotch® Linerless Rubber Splicing Tape 130C (4)
  • Scotch® Multi-Colored Vinyl Electrical Tape 35 (14)
  • Screw Anchor (1)
  • Service Entrance Compression Splice (5)
  • Service Entrance Strap (2)
  • Service Post Connector (11)
  • Sheet Metal Screw (1)
  • Single Barrel Lug (5)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Spade Terminal (1)
  • Spiral Wrap (1)
  • Splice (6)
  • Splice Cap Insulator (1)
  • Splice Connector (1)
  • Splice Kit (3)
  • Splicer Reducer (3)
  • Splicing Tape (1)
  • Split Bolt Connector (7)
  • Spring Nut (2)
  • Square Washer (3)
  • Standard Barrel Lug (17)
  • Staple (23)
  • Submersible Connector (2)
  • Terminal (13)
  • Terminal Block (2)
  • Terminal Kit (1)
  • Terminal Lug (3)
  • Terminal Strip (5)
  • Thin Wall Heat Shrink Tube (13)
  • Thin Wall Shrink Tube (13)
  • Tie Wire (2)
  • Transformer Lug (1)
  • Twister Connector (2)
  • Twist-On Wingnut (6)
  • Twist-On Wire Connector (8)
  • Two Barrel Lug (2)
  • Underground In Line Splice (1)
  • Vinyl Electrical Tape 7MIL .75" 60FT RD (2)
  • Vyl Elec Tape Premium 7MIL .75" 60FT RD (2)
  • Warrior Wrap High Voltage 69KV Linerless Rubber Splicing Tap (2)
  • Wedge Clamp (3)
  • Wing Twist Connector (2)
  • Winged Wire Connector (7)
  • Wire Clip (4)
  • Wire Connector (10)
  • Wire Marker Book (10)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (5)
  • Wire Marking Sleeve (2)
  • Wire Twist Connector (6)
  • Show More...

• Brand

  

  • 3M (126)
  • ABB (34)
  • ABB INC., LOW VOLTAGE PRODUCTS (2)
  • ARLINGTON (2)
  • Arlington Industries (2)
  • Blackburn Grounding (11)
  • Blackburn Mechanical (33)
  • BRADY (5)
  • Brady® (62)
  • Bridgeport (1)
  • BRISCON (2)
  • Buchanan (42)
  • BURNDY (137)
  • Burndy LLC (2)
  • CADDY (1)
  • Catamount (26)
  • COLOR-KEYED (1)
  • Connector Bloks(TM) (9)
  • Cooper B-Line/Cable Tray (1)
  • Deltec (2)
  • Dottie (3)
  • DYMO (2)
  • Easy-Twist (7)
  • Eaton (110)
  • Eaton Corp (2)
  • EATON CUTLER-HAMMER (20)
  • Erico, Inc. Eritec-Caddy (5)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • Gardner Bender (19)
  • Hellermanntyton (4)
  • Ideal (93)
  • Ilsco (18)
  • Ilsco Corporation (18)
  • Klein Tools (2)
  • L.H. Dottie CO. (1)
  • LH DOTTIE (14)
  • METALLICS INC. (1)
  • milwaukee (2)
  • Milwaukee Electric Tool (2)
  • Milwaukee® (7)
  • Minnesota Mining (3M) (45)
  • Newell (Dymo) (3)
  • NSi (106)
  • Nsi Industries (137)
  • nVent CADDY (17)
  • PANDUIT (289)
  • Panduit Corporation (13)
  • Panduit® (115)
  • Pass & Seymour (1)
  • Peco Fasteners, Inc. (4)
  • Platinum Tools (7)
  • Polaris (233)
  • Rack-A-Tiers (4)
  • Scotch (31)
  • Scotchcast (3)
  • ScotchCode (5)
  • SELECTA ACORN FASTENERS (1)
  • Shrink-Kon (1)
  • Southwire (2)
  • Southwire Rough Electrical Com (2)
  • Super 33+ (2)
  • T&B Elec Suppl (10)
  • TE CONNECTIVITY / ENERGY (3)
  • Temflex (8)
  • Thomas & Betts (18)
  • Thomas&Betts-Abb Ins Prod (2)
  • Ty-Grip (1)
  • Ty-Rap (65)
  • Viton(R) (1)
  • W.W. Cross Inc. (9)
  • WarriorWrap (5)
  • Show More...

• Style

  

  • 4-Way (2)
  • Extra Heavy-Duty (2)
  • Heavy-Duty (5)
  • Intermediate (8)
  • Miniature (5)
  • Self-Adhesive (9)
  • Standard (22)
  • Show More...

• Material

  

  • 18-8 STAINLESS STEEL (1)
  • Aluminum (123)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum body -Glass Filled Polyester Base (3)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (9)
  • B-342 Polyolefin (2)
  • B-499 Nylon Cloth (3)
  • Brass (15)
  • Bronze Alloy, Leaded (12)
  • Bronze, Leaded, Commercial (8)
  • Carbon Steel (16)
  • Clear Acrylic (2)
  • Cold Rolled High Carbon Steel (36)
  • Copper (226)
  • COPPER ALLOY (17)
  • Copper Alloy, Cast (5)
  • EPDM RUBBER (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Flame-retardant Polypropelene (41)
  • Flame-retardant polypropelene shell (9)
  • FLEXIBLE POLYOLEFIN (1)
  • Graphite Metallic Steel (8)
  • Heat-shrink Polyolefin (12)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (4)
  • Linerless EPR (4)
  • Low Carbon Steel (3)
  • Nylon (6)
  • NYLON 6 (1)
  • Nylon 6.6 (5)
  • Nylon 6/6 (13)
  • Nylon 66 (2)
  • Nylon 6-6 (3)
  • Nylon Housing, Copper Alloy Contacts (2)
  • Nylon Insulation (13)
  • Nylon/Polyamide 6.6 (35)
  • PET (8)
  • Plastic (14)
  • Plastic Housing (3)
  • PLASTIC INSULATED CARBON STEEL (2)
  • Plastic-Impregnated Cloth (8)
  • Polyamide (30)
  • Polycarbonate (3)
  • Polyester (13)
  • Polyethylene (13)
  • Polyolefin (36)
  • Polypropylene (7)
  • Pre-Galvanized Steel (4)
  • Self-Laminating Vinyl (4)
  • Silicon Bronze (4)
  • SILICONE RUBBER (1)
  • Smooth Plastic (8)
  • Steel (89)
  • Steel (Screw) (5)
  • Thermoplastic (14)
  • TIN PLATED ALUMINUM (1)
  • TIN PLATED BRASS (2)
  • TIN PLATED COPPER (6)
  • Tin-Plated Aluminum (2)
  • Tin-Plated Copper (73)
  • UV Polyethylene (2)
  • Vinyl (66)
  • Vinyl Cloth (10)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (3)
  • Vinyl Insulation (31)
  • Vinyl-Impregnated Cloth (7)
  • Weather-Resistant Nylon 6.6 (16)
  • Show More...

• Sub Brand

  

  • 3M(R) (7)
  • 3M(TM) (17)
  • Aluminum Compression (2)
  • B-Cap(R) (8)
  • Blackburn (20)
  • Burndy (22)
  • CADDY (22)
  • DYMO (3)
  • Easy Wrap(TM) (2)
  • Easy-Splice(TM) (5)
  • Easy-Twist(TM) (14)
  • Entrelec (9)
  • E-Z-CODE ID (5)
  • Greenie(R) (2)
  • Ideal (8)
  • Inkzall(TM) (4)
  • In-Sure(R) (2)
  • Mechanical Connector (3)
  • NSI (35)
  • Panduit Corp (2)
  • Pan-Lug (3)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Scotch(R) (7)
  • Scotchcast (3)
  • Split Bolts (10)
  • Temflex(TM) (8)
  • Twister(R) (3)
  • Type CTAPF (2)
  • Type HSTT (3)
  • Type LAM (2)
  • Type LAMA (5)
  • Type LCA (5)
  • Type LCC (9)
  • Type LCCX (5)
  • Type LCD (6)
  • Wing-Nut(R) (6)
  • WingTwist(TM) (2)
  • Wire-Nut(R) (2)
  • WireTwist(TM) (6)
  • Show More...

• Color

  

  • Aluminum (16)
  • Black (193)
  • Black on Orange (2)
  • Black on White (8)
  • Black, Red on White (2)
  • Blue (78)
  • Blue/Gray (2)
  • Brown (51)
  • Clear (21)
  • Colorless (10)
  • Copper (25)
  • Dark Gray (4)
  • Gray (43)
  • Gray 0 (10)
  • Green (21)
  • GREEN/YELLOW (7)
  • Grey (8)
  • Ivory (23)
  • Metallic (6)
  • Natural (20)
  • OLIVE (2)
  • Orange (16)
  • Orange Alert (3)
  • Pink (19)
  • Purple (18)
  • Red (81)
  • Red/Tan (2)
  • RUBY (2)
  • Silver (16)
  • Tan (10)
  • Tin Plated Copper (12)
  • Various (7)
  • Violet (3)
  • White (83)
  • WHITE GLOSS (1)
  • Yellow (69)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (3)
  • #12 AWG (3)
  • #14 AWG (19)
  • #14 AWG (Stranded) (7)
  • #14 AWG (Stranded);#12 AWG (Solid) (2)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (3)
  • #4 AWG (11)
  • #4 AWG (Stranded) (5)
  • #6 AWG (32)
  • #6 AWG (Stranded) (6)
  • #8 AWG (4)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (2) #14 AWG (4)
  • (2) #18 AWG (8)
  • (2) #20 AWG (2)
  • (2) #22 AWG (2)
  • (3) #16 AWG (3)
  • (3) #18 AWG (2)
  • (3) #20 AWG (2)
  • (3) #22 AWG (3)
  • 250 MCM (6)
  • 4/0 AWG (1)
  • Show More...

• Number Of Pieces

  

  • 201 (1)
  • 50 (2)
  • Show More...

• Length

  

  • 0.5 in (3)
  • 0.6 in (2)
  • 0.75 in (2)
  • 0.8 (3)
  • 1 (7)
  • 1 in (11)
  • 1.06 (2)
  • 1.125 in;28.58 mm (2)
  • 1.25 (2)
  • 1.37 in (4)
  • 1.38;34.9 mm (2)
  • 1.5 (2)
  • 1.85 (7)
  • 1/2 in (8)
  • 1/2 INCH (1)
  • 10 (3)
  • 10.9 (2)
  • 100 (18)
  • 11.08 in;284.4 mm (2)
  • 11.1 in;282 mm (2)
  • 11.3 (2)
  • 11.5 (2)
  • 11.6 (3)
  • 11.77 in;299 mm (2)
  • 11.8 (8)
  • 1-1/16 INCH (4)
  • 1-1/2 (3)
  • 1-1/2 in (4)
  • 1-1/2 INCH (1)
  • 11-1/2 Foot (2)
  • 11-1/2 ft (2)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 (6)
  • 14 (3)
  • 14.2 (7)
  • 14.2 in;360.5 mm (2)
  • 14.287 in;362.9 mm (2)
  • 14.3 (5)
  • 14.5 (5)
  • 14.57 (5)
  • 14.6 in;371 mm (2)
  • 14.655 in;372.24 mm (2)
  • 14.9 (4)
  • 14.96 (2)
  • 15.1 (3)
  • 1-5/16 INCH (1)
  • 16 Foot (3)
  • 18 in;457 mm (2)
  • 18.1 (2)
  • 2 in (3)
  • 2.5 in (2)
  • 20.5 (2)
  • 200 (6)
  • 21 (8)
  • 2-1/2 in (2)
  • 23.62 (2)
  • 3.6 (5)
  • 3.62 in;91.95 mm (2)
  • 3.94 (5)
  • 3.94 in;100.08 mm (2)
  • 3/4 in (4)
  • 3/8 in (2)
  • 30 (5)
  • 30 ft;9.1 m (5)
  • 30.7 (3)
  • 4 (4)
  • 4 ft (9)
  • 4 ft;1.2 m (3)
  • 4.5 (4)
  • 48 in;121.9 mm (5)
  • 5 (5)
  • 5 in (2)
  • 5.4 (6)
  • 5.51 (2)
  • 5.51 in;140 mm (2)
  • 50 (3)
  • 5-1/2 in (4)
  • 6 (2)
  • 6.1 (4)
  • 6.1 in (2)
  • 6.5 (2)
  • 60 (22)
  • 60 ft (4)
  • 66 (12)
  • 66 ft (2)
  • 66 ft;20.1168 m (2)
  • 7 Foot (2)
  • 7.2 (7)
  • 7.31 in;185.67 mm (2)
  • 7.4 (9)
  • 7.435 in;188.85 mm (2)
  • 7.6 in;193 mm (3)
  • 7.800000000000000 (2)
  • 7.9 (8)
  • 75 (2)
  • 8 (13)
  • 8 in (2)
  • 8.1 in;205.70 mm (2)
  • 8.2 (2)
  • 8.46 in;215 mm (2)
  • 8.5 (4)
  • 9 (3)
  • 9 in;22.9 mm (2)
  • 9/16 in (2)
  • NA (14)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (3)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (2)
  • #10 AWG (3)
  • #12 AWG (4)
  • #2 AWG (10)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (Stranded) (4)
  • #3 AWG (Stranded);#2 AWG (Solid) (3)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (6)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded) (2)
  • #6 AWG (20)
  • #6 AWG (Stranded) (2)
  • #8 AWG (5)
  • (3) #10 AWG (2)
  • (3) #12 AWG (5)
  • (3) #16 AWG (4)
  • (4) #12 AWG (3)
  • (5) #12 AWG (8)
  • 1/0 AWG (10)
  • 1/0 AWG (Stranded) (2)
  • 2/0 AWG (9)
  • 2/0 AWG (Stranded) (3)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (2)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (11)
  • 3/0 AWG (8)
  • 300 MCM (1)
  • 350 MCM (5)
  • 4/0 AWG (2)
  • 500 MCM (9)
  • 600 MCM (2)
  • 750 MCM (2)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (3)
  • # 2 AWG (STR) (7)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (8)
  • # 6 AWG (STR) (7)
  • # 8 AWG (STR) (6)
  • #12 to #6 AWG (2)
  • #2 to 4/0 AWG (2)
  • #8 to 1/0 AWG (2)
  • (2) 14 AWG/(2) 12 AWG (2)
  • (2) 14 AWG/(2) 12 AWG (NON METALLIC CABLE) (2)
  • (2) 14 To (3) 10 AWG (3)
  • (3) 6 AWG SERVICE ENTRANCE UTILITY CABLE (1)
  • 0.0625 AWG (2)
  • 1/0 AWG (STR) (6)
  • 1/0 AWG-250 MCM (2)
  • 1/4 in (2)
  • 1-1/2 INCH (1)
  • 12 - 10 (2)
  • 12 AWG, 14 AWG (3)
  • 14 to 2, 12 to 2 (3)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 2/0 AWG (STR) (4)
  • 250 MCM (STR) (4)
  • 3/0 AWG (STR) (5)
  • 3/8 in (2)
  • 300 MCM (STR) (2)
  • 350 MCM (STR) (4)
  • 4/0 AWG (STR) (6)
  • 4/0-14 AWG (2)
  • 400 MCM (STR) (2)
  • 500 MCM (STR) (5)
  • 600 MCM (STR) (2)
  • 750 MCM (STR) (3)
  • NA (18)
  • Show More...

• Background Color

  

  • Black (15)
  • NSI (3)
  • Orange (6)
  • White (16)
  • Show More...

• Legend Color

  

  • Black (14)
  • Black on White, Clear (2)
  • Non-Smear Black (11)
  • White (12)
  • Show More...

• Bundle Diameter

  

  • 0.0625 in (Minimum);1.59 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);1.75 in (Maximum);44.45 mm (Maximum) (4)
  • 0.0625 in (Minimum);1.59 mm (Minimum);2.0 in (Maximum);50.8 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (4)
  • 0.08 in (Minimum);2 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);1.14 in (Maximum);29 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);3.0 in (Maximum);76 mm (Maximum) (2)
  • 0.138 in (Minimum);3.5 mm (Minimum);1.77 in (Maximum);45 mm (Maximum) (3)
  • 0.138 in (Minimum);3.5 mm (Minimum);4.01 in (Maximum);102 mm (Maximum) (2)
  • 0.236 in (Minimum);6 mm (Minimum);3.54 in (Maximum);90 mm (Maximum) (3)
  • 0.236 in (Minimum);6 mm (Minimum);5.0 in (Maximum);127 mm (Maximum) (2)
  • 0.75 in;19.1 mm (2)
  • 1.25 in (Maximum);31.75 mm (Maximum) (2)
  • 1.25 in;32 mm (2)
  • 1.87 in;47.5 mm (3)
  • 3 in;76.2 mm (2)
  • 4 in;101.6 mm (2)
  • Show More...

• Width

  

  • .75 (33)
  • 0.09 (7)
  • 0.09 in;2.29 mm (2)
  • 0.095 in;2.41 mm (2)
  • 0.096 in;2.4 mm (2)
  • 0.1 (3)
  • 0.14 (11)
  • 0.14 in;3.56 mm (4)
  • 0.14 in;3.6 mm (6)
  • 0.14 in;3.71 mm (2)
  • 0.18 (4)
  • 0.18 in;4.6 mm (9)
  • 0.180000000000000 (2)
  • 0.181 (2)
  • 0.184 in;4.67 mm (2)
  • 0.186 in;4.73 mm (6)
  • 0.187000000000000 (2)
  • 0.19 (13)
  • 0.19 in;4.82 mm (2)
  • 0.217 (2)
  • 0.22 in (4)
  • 0.22 in;5.6 mm (2)
  • 0.24 (4)
  • 0.27 (5)
  • 0.27 in;7.0 mm (7)
  • 0.3 (7)
  • 0.30 in;7.62 mm (4)
  • 0.305 (2)
  • 0.32 (2)
  • 0.34 (3)
  • 0.345 in;8.76 mm (2)
  • 0.5 (4)
  • 0.5 INCH (1)
  • 0.75 (14)
  • 0.75 in (3)
  • 0.75 INCH (1)
  • 1 (15)
  • 1 in (2)
  • 1 in;25.4 mm (2)
  • 1 INCH (1)
  • 1.5 (5)
  • 1.75 (3)
  • 1/2 INCH (4)
  • 1/4 in (4)
  • 1-1/8 (4)
  • 19/32 INCH (4)
  • 2 (15)
  • 2 in;50.8 mm (2)
  • 2-1/4 (2)
  • 28.58 mm;1.125 in (3)
  • 3 in (4)
  • 3.0 (3)
  • 3/4 in (7)
  • 3/4 in;19 mm (8)
  • 3/4 INCH (2)
  • 3-1/2 in (2)
  • 4.5 (2)
  • 7 (2)
  • NA (38)
  • Show More...

• Backing Material

  

  • Ethylene Propylene Rubber (6)
  • NSI (7)
  • Plasticized Polyvinyl Chloride (PVC) (32)
  • Polyester (2)
  • Polyvinyl Chloride (2)
  • PVC (7)
  • Vinyl Impregnated Cloth Film (4)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (4)
  • Flame Retardant Polycarbonate (3)
  • Nylon (2)
  • Plastisol (36)
  • Silicone Bronze (4)
  • Thermoplastic (11)
  • Vinyl (3)
  • Show More...

• Conductor Material

  

  • Aluminum (10)
  • Aluminum;Copper (14)
  • Copper (114)
  • Copper/Aluminum (10)
  • Copper;Aluminum (41)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • Show More...

• Adhesion Strength

  

  • 16 (11)
  • 20 to 30 lb/in (Steel);8 to 14 lb/in (Backing) (4)
  • 22 (10)
  • 33.2 (11)
  • Show More...

• Tensile Strength

  

  • 11 (2)
  • 120 (30)
  • 120 lb/530 N (7)
  • 120 lb/534 N (4)
  • 15 (11)
  • 17 (10)
  • 17 lb/in (4)
  • 175 (3)
  • 175 lb/778 N (2)
  • 18 (20)
  • 18 lb/80 N (4)
  • 18 lb;8.165 kg (3)
  • 19.8 (11)
  • 20 (2)
  • 200 (4)
  • 2400 psi (17)
  • 250 (7)
  • 30 (3)
  • 30 lb/135 N (5)
  • 333.6 (3)
  • 40 (24)
  • 40 lb (2)
  • 40 lb/178 N (8)
  • 42 lb/in (4)
  • 450 (2)
  • 450;2002 (2)
  • 50 (57)
  • 50 lb/220 N (8)
  • 50 lb/222 N (4)
  • 50 lb;220 Nm;22.68 kg (7)
  • 50;222 (4)
  • 7.5 lb/in (3)
  • Show More...

• Insulation Color

  

  • Black (38)
  • Black (Code) (3)
  • Blue (11)
  • Blue (Code) (13)
  • Brown (2)
  • Brown (Code) (6)
  • Clear (2)
  • Gray (10)
  • Gray (Code) (4)
  • Green (8)
  • Orange (5)
  • Orange (Code) (2)
  • Pink (Code) (2)
  • Purple (5)
  • Purple (Code) (3)
  • Red (17)
  • Red (Code) (2)
  • Silver (2)
  • Tan (3)
  • Yellow (12)
  • Show More...

• Legend

  

  • (Blank) (3)
  • 0 - 9, t1, t2, t3, l1, l2, l3 (2)
  • 0 to 9 (2)
  • 0-9 (3)
  • 120 VOLTS (1)
  • 120/208V (2)
  • 1-45 (3)
  • 240 VOLTS (1)
  • 277/480V (1)
  • 46-90 (2)
  • 480 Volts (2)
  • DANGER HIGH VOLTAGE (1)
  • DO NOT OPERATE (1)
  • HIGH VOLTAGE (1)
  • Show More...

• Language

  

  • English (6)
  • No Text (2)
  • Show More...

• Finish

  

  • Acrylic (2)
  • Aluminum (15)
  • Caddy?® Armour (7)
  • CADDY® ARMOUR (3)
  • COPPER (28)
  • Electro Galvanized (3)
  • Electro-galvanized (3)
  • EPDM Rubber Insulated (8)
  • Galvanized (3)
  • Gloss (12)
  • Graphite Metallic (12)
  • Matte (24)
  • Nickel Plated (4)
  • Plastisol (2)
  • Plastisol Insulated (81)
  • Polycarbonate (3)
  • Pre-Galvanized (8)
  • Thermal Plastic (3)
  • Thermoplastic (20)
  • Tin Plated (104)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tinned (56)
  • Tin-Plated (9)
  • Untreated (3)
  • white (2)
  • Zinc Phosphate (50)
  • Zinc Plated (26)
  • Show More...

• Thickness

  

  • .007 (32)
  • 0.003 (2)
  • 0.004 (8)
  • 0.007 in (2)
  • 0.01 (2)
  • 0.02 (8)
  • 0.02 in;0.51 mm (2)
  • 0.025 (17)
  • 0.025 in (2)
  • 0.025 in;0.64 mm (5)
  • 0.03 (4)
  • 0.03 in;0.75 mm (2)
  • 0.035 (5)
  • 0.04 (25)
  • 0.04 INCH (1)
  • 0.040000000000000 (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.047 (2)
  • 0.05 (44)
  • 0.05 in;1.2 mm (6)
  • 0.05 in;1.3 mm (8)
  • 0.05 in;1.31 mm (4)
  • 0.052 (2)
  • 0.052000000000000 (2)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.06 (34)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.07 (14)
  • 0.075 in;1.91 mm (4)
  • 0.08 (14)
  • 0.085 in;2.15 mm (2)
  • 0.09 (2)
  • 057 (2)
  • 1/4 in (2)
  • 10 (2)
  • 10 mil;0.25 mm (5)
  • 30 (3)
  • 30 mil (3)
  • 30 mil;0.76 mm (3)
  • 7 mil (6)
  • Show More...

• Load Rating

  

  • 30 lb (3)
  • 40 LB AT 3/8 INCH THK, 50 LB AT 1/2 INCH THK, 75 LB AT 5/8 INCH THK FOR GYPSUM (1)
  • Show More...

• Additional Information

  

  • APPLICATION GYPSUM; WEIGHT 1.42 LB; PACKAGING QUANTITY 100 PER STANDARD PACK; DRIVE TYPE PHILLIPS; DRIVE SIZE #3 (1)
  • COLOR GRAY (1)
  • Drc Model (2)
  • Elongation Rate 22.5 (2)
  • Number of Conductors 2 (2)
  • RoHS Compliant; Thickness 0.0065 Inch; Finish Matte; Temperature Rating -40 to 194 Deg F; Approval UL, CSA (3)
  • RoHS Compliant; Used On Rhino 6000 Dynamometer; Applicable Standard UL 969, ANSI, OSHA, ISO (4)
  • STANDARD PACKAGE 5 PER CASE (1)
  • WEIGHT 0.16 LB (1)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • Air Handling Space (4)
  • Air Handling Space;Outdoor (5)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper Cables;Aluminum Cables (6)
  • Copper Wire (3)
  • Datacom and Low Voltage;Electrical (3)
  • Fasteners;Conduit Fasteners (9)
  • Flexible, Extra-Flexible, and Code Stranded Copper Conductors (3)
  • Flexible;Extra-Flexible;Code Stranded Copper Conductors (5)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Gas or Electric Heating Device (2)
  • Greater than 2000 Volts Consult Cable (3)
  • Grounding and Bonding;Direct Burial in Earth or Concrete (8)
  • Overhead Tension Connection (2)
  • Splicing Two Copper or Aluminum Wire (2)
  • Standard Conductors (5)
  • Stranded Aluminum or Copper Code Conductors (7)
  • Stranded Copper Conductors (24)
  • Terminate;Splice;Tap Power Connectors (18)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (12)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Wireless Network: Infrastructure Accessories (2)
  • Show More...

• Package Quantity

  

  • 1 (5)
  • 1 BG;5 CT (4)
  • 1 ct (28)
  • 1 CT;10 PK (10)
  • 1 CT;100 PK (6)
  • 1 CT;12 PK (4)
  • 1 CT;150 PK (2)
  • 1 CT;25 PK (5)
  • 1 CT;3 PK (3)
  • 1 CT;5 PK (11)
  • 1 CT;6 Pk (3)
  • 1 PK (10)
  • 1 PK;100 CT (2)
  • 1 RL/CT;24 RL/CA (2)
  • 10 CT (5)
  • 10 CT;240 PK (4)
  • 10 PK (17)
  • 10 RL/CA;100 RL/CA (3)
  • 100 BG (11)
  • 100 BX (29)
  • 100 BX;5000 CA (2)
  • 100 CT (21)
  • 100 CT;500 PK (5)
  • 100 CT;800 PK (5)
  • 100 PK (11)
  • 100 RL/CA (2)
  • 1000 CA (4)
  • 1000 PK;100 CT (4)
  • 10000 PK;100 CT (3)
  • 10000 PK;1000 CT (8)
  • 12 CA (6)
  • 12 CT (7)
  • 12 PK (2)
  • 2 CT (5)
  • 20 PK (2)
  • 200 CT (2)
  • 200 JR (2)
  • 24 CT (2)
  • 25 BG (2)
  • 25 BX (2)
  • 25 CA (2)
  • 25 CT (11)
  • 25 PK (13)
  • 250 CT (2)
  • 25000 PK;100 CT (3)
  • 3 CT (13)
  • 300 JR (3)
  • 4 CT (7)
  • 400 JR (2)
  • 50 BX (3)
  • 50 CT (16)
  • 50 CT;200 PK (2)
  • 50 PK (21)
  • 500 BG (7)
  • 500 BX (4)
  • 500 CT;5000 PK (3)
  • 500 JR (4)
  • 500 PK (2)
  • 500 PK;50 CT (7)
  • 5000 BC (3)
  • 5000 CA (2)
  • 5000 PK;100 CT (16)
  • 5000 PK;1000 CT (2)
  • 6 CT (22)
  • 6 PK (4)
  • 75 CT (2)
  • Show More...

• Special Features

  

  • # 2 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 4 AWG (STR) - 1/4 Mounting Hole (2)
  • # 4 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 8 AWG (STR) - 3/8 Mounting Hole (3)
  • (2) 750-250 MCM - Dual Rated (2)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • .472 OD-.354 ID - .354-2.56 Bundle Range (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT51;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT52;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 2/0 AWG (STR) - # 1 Pin Size (2)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (2)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (2)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 3m Clear Tubing Fp-301 Provides Excellent Visibility For Component Packing;Split Resistant (9)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (2)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 600 MCM (STR) - 400 Pin Size (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (4)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Abrasion Resistant;Fire and Chemical Resistant (3)
  • Abrasion Resistant;Oil Resistant (2)
  • Accepts (2) 14 To (4) 10 AWG MC/AC Cable, 5/16 In and 3/8 In Flexible Conduit (2)
  • Accomodates Stranded cable, With Inspection window, Long barrel (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 1-3/4 IN;Vinyl-Impregnated Cloth Construction Provid (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 3/4 IN;Vinyl-Impregnated Cloth Construction Provides (4)
  • Aggressive Adhesive;Harsh Environment;Outdoor Durable;Permanent Adhesive (6)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (2)
  • Anti-Roll Body Design (3)
  • Bright, colorful signs identify potentially hazardous work areas;Protected graphics for indoor and outdoor use;Resistant to both chemicals and abrasion (2)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • CLIP,CONDUIT, (4)
  • Color Coding (13)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Compact Design (3)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Prefilled with Oxide Inhibitor to prevent oxidation and keep out moisture. All Splices are color coded and marked with strip lengths, installation die codes and compression locations, providing easy identification for easy installation (11)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (7)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (68)
  • Convenient Pocket-Size Booklets;Plastic-Impregnated Cloth Construction for Long-Lasting Durability;Resists Abrasion, Moisture, Dirt and Oil;Perforated 1-1/2 in Markers can be Separated into Half-Length Sizes;Self-Sticking on Wire and Cable;For Above Ground;Below Ground (2)
  • Corrosion Resistant (3)
  • Degree of protection: IP20 (4)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Detectable by metal detectors, X-ray equipment, or visual detection (6)
  • Drop wire may be cut to exact length for adjustments in drop wire sag. Can be attached to bare neutral at any point in the span. Flexible and rigid bails grip ACSR, AAC and AAAC Conductors (3)
  • Dual Barrel Provides Termination of two Conductors;High Strength (2)
  • Dual Rated For Use With Copper And Aluminum Cable (3)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (2)
  • Electro-Tin Plated (3)
  • Electro-Tin Plated for Low Contact Resistance (5)
  • Eliminates errors in premounting the base with respect to its orientation to wire bundle direction (3)
  • Excellent Adhesion and Elasticity, All Weather Performance, High Tensile Strength, Resistant to UV, Abrasion and Corrosion, Flae-Retardant. (10)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Extremely Flexible with Good Adhesion and Conformability (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (3)
  • Features: 12 Gauge Steel, Rust Inhibitor, Finger Friendly (5)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 10 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: General Purpose Cable Tie For Every Day Bundling And Cable Management;UL Recognized (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (2)
  • Features: Made Of Tin-Plated Cast Copper Alloy, It Accommodates Either One Or Two Conductors, Copper Or Aluminum Cable, In Addition To A Low Profile Head With A Deep Phillips Recess, The Galvanized Steel Bolt Has A Ribbed Neck Which Prevents Rotation During Installation When Installed In A 0.44 Diameter Hole, When Used On Aluminum Conductor, The Cable Must Be Scratch Brushed And PENETROX A Joint Compound Must Be Used On Cable And Connector, UL467 Listed For Copper Conductor Only, Suitable For Direct Burial (3)
  • Features: Manufactured with Filtered Nylon 6/6, Angled Tail, One Piece Design, Transition Rails, And 3 Tooth Pawl, Rounded Edges, Finger Grips, Bulk Available (2)
  • Features: Self-Drilling (4)
  • Features: Self-Sticking On Wire And Cable; Perforated 1/4 IN X 1-1/2 IN Markers; For Applications Above Or Below Ground; Resists Abrasion, Moisture, Dirt And Oil; Non-Smear Black Legend Ensures High Visibility; 10 Pages Per Booklet; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Self-Tapping, Bottom Mount (2)
  • Features: The Type SP VINYLINK Is A PVC Insulated Seamless Butt Splice, Type SP VINYLINK Is Designed To Accommodate A Broad Range Of 600 Volt Cables, Manufactured From Seamless Electrolytic Copper Tubing: Provides Maximum Conductivity And Tensile Strength, In A High Quality Design With NO Seams To Split, Funnel Entry: Provides Easy Wire Insertion, Electro-Tin Plated: Provides Durable Long Lasting Resistance To Corrosion, Expanded Insulation Support: Lower Inventory Requirements, Red Wire Range Of 22-16: Lo (3)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (4)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: Use With Service Entrance Cable And Conduit; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails (3)
  • Features: Use With Wider Cable Such As ROMEX, NM And UF; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails (3)
  • Features: Use With Wider Cable Such As ROMEX, NM And UF; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails; Nail Type: Standard (2)
  • Features: Use With Wider Cable Such As ROMEX® , NM And UF; High-Grade Carbon Steel Construction; Sharp Point Legs Drive Straight Without Splitting Wood; Resist Rust And Corrosion (7)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (11)
  • Fixed;Square-Wire Spring Creates its Own Threads Maintains a Secure Positive Grip That Will Not Relax Over Time (2)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 15 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 25 Lb (2)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (2)
  • Flexible, Polyolefin (17)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For Cross Connections in The Bridge Shaft (2)
  • For Power Connector Applications up to 35KV (2)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Good Ahesion and Elasticity, All Weather Performance, Great Tensile Strength, Resistant Tto UV, Abrasion and Corrosion, Falme-Retardant. (11)
  • Harsh (7)
  • Heat Shrink (11)
  • Heavy-Wall Cable Sleeve;For Electrical Splices;Connections;For Indoor, Outdoor or Overhead Use;Direct Buried or Submersible;Insulating Secondary Splices;Relocation of Service;Dig-In Repairs;Sheath Repairs (8)
  • Helps prevent mistakes and trial and error searching during electrical service work (3)
  • Helps reduce drop wires by up to 66% (2)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • High Strength Solderless Service Connector (7)
  • Horizontal markings (3)
  • Indoor (23)
  • Indoor/Outdoor (32)
  • Industrial-Strength Tear-Proof Adhesive Resists Moisture, Extreme Temperatures (3)
  • It has Excellent Resistance to Abrasion, Moisture, Alkalies, Acid, Copper Corrosion and Varying Weather Conditions (4)
  • Long Barrel (9)
  • Long Barrel Maximizes Number of Crimps and Provides Premium Wire Pull-Out Strength and Electrical Performance (7)
  • Long Barrel;High Conductivity (11)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (53)
  • Made from Heavy Wall, Extruded, High Conductivity Copper;For Power Connector Applications up to 35kv (6)
  • Made of High Copper Alloy;Re-usable (3)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (3)
  • Marked with Die Index and Color Coded (2)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Non-Insulated Ring Terminal 6 AWG - 50 Pack (3)
  • Non-Insulated Ring Terminal 8 AWG - 50 Pack (2)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (2)
  • Nylon Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • One-piece molding - no lost parts (2)
  • Perfect for coaxial, fiber optic and all other communication and electrical conducting cables (2)
  • Perfect for wire and cable. Print heat-shrink sleeves on the spot (3)
  • Plenum (40)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Premium (2)
  • Pre-printed (12)
  • Provides an Excellent Thermal Dissipation of Splice Heat (3)
  • provides excellent thermal dissipation of splice heat (2)
  • Recommended screw driver: 4 mm (2)
  • Rigid (2)
  • Scratch-Resistant;Solvent-Resistant (2)
  • Self Laminating & Wrap Around (4)
  • Self Sticking Safety Signs have a 5 to 8 year Durability (2)
  • Self-Sticking on Wire and Cable;For applications above or below ground;Resists Abrasion, Moisture, Dirt and Oil;Non-smear Black Legend Ensures High Visibility;For Above Ground;Below Ground (2)
  • Specially Designed Contour Wings Provide a Secure Grip for Extra Levarage (6)
  • Standard Barrel;High Conductivity (2)
  • Static Load Capacity 100 Lb (Vertical), 25 Lb (Horizontal), Clearance Hole For 1/4 In Bolt (3)
  • Static Load Capacity 160 Lb (5)
  • Static Load Capacity 25 Lb (5)
  • Static Load Capacity 50 Lb (Vertical), 25 Lb (Horizontal), Attaches To 1/8 To 3/8 In Flanges, #12 Wire To 1/4 In Plain/Threaded Rod (2)
  • Suitable for Damp Locations (2)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • Superior Adhesion and Elasticity, Extreme Weather Performance, Excellent Tensile Strength, Highly Resistant to UV, Abrasion and Corrosion. (12)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • Thickness 1/4 In, Weight 11.6 Lb per 100 (2)
  • Three splices (3)
  • Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry (3)
  • Tin-Plated to Inhibit Corrosion (12)
  • Tin-Plated to Inhibit Corrosion;Compact Design (5)
  • Two Breakouts (3)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (12)
  • Vertical markings (4)
  • Vinyl Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 16-14 AWG - 100 Pack (2)
  • Vinyl Insulated Ring Terminal 12-10 AWG - 50 Pack (5)
  • Vinyl Insulated Ring Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 22-18 AWG - 100 Pack (4)
  • Vinyl Insulated Spade Terminal 16-14 AWG - 100 Pack (2)
  • Vinyl Insulated Spade Terminal 22-18 AWG - 100 Pack (2)
  • Width 1-5/8 In, Bolt Size 1/2 In (2)
  • Width 1-5/8 In, Bolt Size 3/8 In (4)
  • Write-on (2)
  • Show More...

• Weight

  

  • 0.0006 lb (3)
  • 0.001 lb (2)
  • 0.0025 lb (3)
  • 0.0037 lb (3)
  • 0.004 lb (4)
  • 0.005 lb (11)
  • 0.0056 lb (2)
  • 0.006 lb (2)
  • 0.0062 lb (2)
  • 0.01 lb (31)
  • 0.01 LB (Each) (2)
  • 0.011 lb (2)
  • 0.02 lb (10)
  • 0.02 lb/EA (7)
  • 0.03 lb (8)
  • 0.03 lb/EA (5)
  • 0.04 lb (2)
  • 0.04 lb/EA (8)
  • 0.05 lb (3)
  • 0.05 lb/EA (9)
  • 0.06 lb (2)
  • 0.06 lb/EA (6)
  • 0.07 lb (6)
  • 0.08 lb/EA (11)
  • 0.09 lb (3)
  • 0.09 lb/EA (5)
  • 0.1 lb/EA (4)
  • 0.10 lb/EA (2)
  • 0.11 lb/EA (2)
  • 0.12 lb/EA (4)
  • 0.13 lb (2)
  • 0.13 lb/EA (10)
  • 0.14 lb/EA (2)
  • 0.15 lb (3)
  • 0.15 lb/EA (2)
  • 0.16 lb (2)
  • 0.16 lb/EA (2)
  • 0.17 lb (2)
  • 0.17 lb/EA (3)
  • 0.18 lb (5)
  • 0.19 lb (5)
  • 0.19 lb/EA (5)
  • 0.2 lb (5)
  • 0.21 lb (2)
  • 0.22 lb (5)
  • 0.24 lb (2)
  • 0.26 lb (3)
  • 0.26 lb/EA (3)
  • 0.27 lb (2)
  • 0.28 lb/EA (3)
  • 0.3 lb (2)
  • 0.3 lb/EA (2)
  • 0.31 lb/EA (3)
  • 0.34 lb (2)
  • 0.37 lb (3)
  • 0.38 lb (2)
  • 0.41 lb (2)
  • 0.41 lb/EA (2)
  • 0.44 lb (2)
  • 0.45 lb/EA (3)
  • 0.53 lb/EA (2)
  • 0.62 lb (2)
  • 0.62 lb/EA (2)
  • 0.64 lb (2)
  • 0.72 lb (2)
  • 1 lb (8)
  • 1 lb/EA (19)
  • 10 lb (6)
  • 2 lb/EA (2)
  • 3.5 lb (2)
  • Show More...

• Overall Length

  

  • 0.780 in (2)
  • 0.80 in;20.3 mm (2)
  • 1 in;25.4 mm (2)
  • 1.12 in (2)
  • 1.153 in (2)
  • 1.16 in (2)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.62 in (2)
  • 1.752 in (2)
  • 1.84 in (2)
  • 1.913 in (2)
  • 1.93 in (2)
  • 2 in (6)
  • 2.10 in (2)
  • 2.63 in (2)
  • 2.677 in (2)
  • 2-25/32 in (5)
  • 3.25 in (2)
  • 4 in (6)
  • 48 in (2)
  • 5.5 in (5)
  • 6.38 in (2)
  • Show More...

• Terminal Type

  

  • Compression (20)
  • Compression Lug (3)
  • Compression;Crimp (10)
  • Push-In (3)
  • Ring Tongue (4)
  • Screw (39)
  • Split (9)
  • Tension (2)
  • Tongue (6)
  • Twist-On (4)
  • Winged (7)
  • Show More...

• Maximum Voltage Rating

  

  • 1000 V (4)
  • 2000 V (3)
  • 300 V (7)
  • 35 kV (46)
  • 600 V (107)
  • 600 V (Building Wire);1000 V (Maximum Signs/Lighting Fixture) (2)
  • 600 V ac (52)
  • Show More...

• Application

  

  • "Moisture sealing and physical protection for cables, pipes or other cylindrical objects" (4)
  • (1) Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; (2) Highly Flexible Open Weave will not Trap Heat or Humidity; (3) Allows for Use with Irregular Shapes (2)
  • BALL-TYPE SWIVEL FIXTURE COVERS FOR PENDANT MOUNTED FIXTURES (2)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Cable and Wire Marking, General and Industrial Identification, Laboratory Identification, Panel Labeling, Voice and Data Identification (3)
  • Cable Bundling (7)
  • Cable Tie Entry from All Four Sides, Used with Miniature, and Intermediate Cables Ties;Indoor (2)
  • Cable ties are primarily used to cinch wires and cables together to form a neat and organized bundle (12)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (22)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - O (2)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (21)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (8)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsDatacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Component and Equipment Labeling;Electrical Labeling;Facility Identification;Floor Marking;Lean and 5S Labeling;Pipe and Valve Marking;Warehouse Marking (5)
  • Concrete, Pipe Hanging, Conduit, Eye Rod, Cable Trays, Lighting Systems, Strut Channels, Overhead Utilities, Sprinkler Systems, Drop Ceilings, HVAC Duct, Electrical, Refrigeration (6)
  • Construction;Industrial;Military (9)
  • Covers wire and cable to protect from abrasion (5)
  • Datacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketDatacenters - Datacenters - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherIn (2)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (10)
  • Dead-End Self-supporting Drop Wire (3)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (13)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (5)
  • Electrical Labeling;Wire and Cable Labeling (11)
  • Fastens to surface with a hammer. (2)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For Aluminum And Copper Conductors (13)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (6)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (5)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Cables (4)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (6)
  • For Dry Locations (22)
  • For Dry Locations;Insulating and protecting wires and cables (15)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For Grounding And Bonding Applications (2)
  • For Indoor And Outdoor Use (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (14)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (2)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Service Entrance Cable And Conduit (4)
  • For Standard Conductor Splice (12)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (7)
  • For Use With Copper And Aluminum Conductors (2)
  • For use with non-metallic cable (10)
  • For use with SNA terminal blocks (3)
  • For use with SNK screw clamp terminal blocks (2)
  • For use with SNK terminal blocks (5)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (19)
  • General (15)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • General Purpose;Indoor;Outdoor;Cable Harnessing;Wire Harnessing (3)
  • General Use (2)
  • Grounding and Bonding Applications (4)
  • Grounding Application (3)
  • Grounding Wire (6)
  • Hardware For Lugs (4)
  • Harness Multiple Cables Into a Single Manageable Bundle; Allows Breakouts of Single/Multiple Cables; Provides Abrasion Protection for Wire, Cables, Hoses, and Tubing (6)
  • Harsh Environment (6)
  • High Voltage (2)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Ind Facilities & Factories - Facility - Other (2)
  • Indoor (17)
  • Indoor/Outdoor (3)
  • Indoor;Outdoor (8)
  • Indoor;Used with Miniature, Intermediate, and Standard Cables Ties (6)
  • Industrial (2)
  • Industrial;Labeling Wire;Cable and Rounded Surface (2)
  • Industrials, Hospitals, Utilities, Marine, Computer (2)
  • Insulating or Joining 1 or more aluminum to copper conductors (2)
  • Insulating or Joining 1 or more conductors (34)
  • Insulating or Joining 2 or more conductors (13)
  • Labeling Wire, Cable and Rounded Surface (2)
  • Marking Wire and Cable (4)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (2)
  • NA (2)
  • NSI (54)
  • OSB;Cinder Block;Concrete (4)
  • Other (20)
  • Other IT and Datacom - Other InfrastructuresUtilityInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherGeneration - Conventional Energy - Conventional EnergyGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetWater and W (2)
  • Outdoor (11)
  • Overhead Tension Connection (2)
  • Premium (13)
  • Primary Electrical Insulation for Splicing all Solid Dielectric Cables Through 69 kV. (3)
  • Professional;Premium Grade (2)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (5)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (3)
  • Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; Highly Flexible Open Weave will not Trap Heat or Humidity; Allows for Use with Irregular Shapes (4)
  • Splicing Wire (27)
  • Stranded Aluminum or Copper Code Conductor (8)
  • Terminate, Splice, Tap Power Connectors (128)
  • Terminate-Splice-Tap (3)
  • To be used for marking SNA terminal blocks (8)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (2)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (4)
  • Used to bundle and secure wire and cable. (2)
  • Utility/Ground Grid (9)
  • Wire and Cable Labeling (3)
  • Wire Identification (3)
  • Wire Marking (8)
  • Wire Retainer (3)
  • Wire Splicing (4)
  • Wire Termination (202)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (23)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (24)
  • BOX SUPPORT (11)
  • CABLE & PIPE TRANSITS (45)
  • CADDY (STRAPS ONLY) (11)
  • Comp & Mech Lugs and Butt Splices (300)
  • CONDUIT HANGERS/STAND OFF STRAPS (2)
  • Datacom Wiring Devices and Accessories (17)
  • DISCONNECTS (3)
  • EXOTHERMIC GROUNDING PRODUCTS (2)
  • FASTENERS (15)
  • FUSE BLOCKS,FUSE HOLDERS (3)
  • Fuses & Fuse Accessories (13)
  • HAND TOOLS (15)
  • HEAT/COLD SHRINK (166)
  • MISC FITTINGS (5)
  • Miscellaneous residential devices (3)
  • Printers and Labeling (46)
  • SAFETY PRODUCTS (12)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (293)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (76)
  • SPLICE KITS (42)
  • SPLIT BOLTS (160)
  • SPRING NUTS & TWIRL NUTS (3)
  • T&B C TAP LUGS (14)
  • TAPE (109)
  • TERMINAL BLOCK ACESSORIES (33)
  • TERMINAL BLOCKS POWER DIST BLOCKS (60)
  • TERMINALS (165)
  • TRANSFORMER ACCESSORIES (1)
  • WIRE LUBE, MARKERS, & TIES (141)
  • WIRE NUTS (69)
  • Show More...

• Stud Size

  

  • #10 (3)
  • 1/2 (59)
  • 1/4 (55)
  • 3/8 (55)
  • 5/16 (10)
  • 5/8 (2)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 1k VAC (5)
  • 1k/5k (4)
  • 2000 (3)
  • 24 VDC (1)
  • 300 (6)
  • 300 V (39)
  • 300, 400 (2)
  • 35 (4)
  • 35 kV (6)
  • 35kV (2)
  • 600 (95)
  • 600 V (331)
  • 600 V ac (7)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (3)
  • 600V (2)
  • IEC 500V, UL 150V (3)
  • NA (10)
  • Show More...

• Number Of Conductors

  

  • 1 (78)
  • 10 (2)
  • 12 (2)
  • 2 (116)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (2)
  • 2 to 6 (7)
  • 3 (25)
  • 4 (15)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Housing Material

  

  • Aluminum (71)
  • Aluminum Alloy-Tin Plated (4)
  • Copper (21)
  • Thermoplastic (3)
  • Tin Plated Copper (6)
  • Show More...

• Minimum Qty

  

  • 10 (2)
  • 100 (176)
  • 1000 (21)
  • 15 (3)
  • 150 (2)
  • 2 (1)
  • 20 (2)
  • 200 (2)
  • 20000 (1)
  • 25 (17)
  • 250 (9)
  • 300 (2)
  • 350 (1)
  • 40 (3)
  • 5 (2)
  • 50 (72)
  • 500 (34)
  • 5000 (5)
  • 8000 (1)
  • Show More...

• Wire Type

  

  • ALUMINUM/COPPER (3)
  • B,C,D,K,M,I (12)
  • Class A & B (33)
  • Class B & C (83)
  • COPPER (10)
  • CU Wire Only (16)
  • SOLID (1)
  • Solid, Stranded, Stranded (Tin Bonded) (3)
  • STRANDED (1)
  • Show More...

• Temperature Rating

  

  • 105 C (6)
  • 105 DEG C Shell Rated (3)
  • 105° C (3)
  • 122 (10)
  • 131 TO 275 DEG F (1)
  • 170 (4)
  • 194 (15)
  • 194° F (3)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (32)
  • 257 (8)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (7)
  • -40 °F - 158 °F (3)
  • -40 F to 250 F (3)
  • -40 To 180 (7)
  • 90 (4)
  • 90 C (72)
  • 90 DEG C (1)
  • Show More...

• Type

  

  • 2- Nail (4)
  • 2 NAIL, INSULATED (2)
  • 2-Wire Standard Version (2)
  • ADHESIVE (5)
  • Aluminum Double Lug (5)
  • Aluminum Service Wedge Clamp (3)
  • Aluminum Single Lug (3)
  • Aluminum Split Bolts (4)
  • AMS, Dual Rated (2)
  • Automatic Tension Splice (2)
  • Beam fasteners (4)
  • Bi-Metallic Pin (3)
  • Bolted Lugs & Terminals (21)
  • Bottom Mount Rod Hanger (2)
  • Bracket fastener (3)
  • Braided Expandable Sleeving (8)
  • Breatout Boot (3)
  • Bridle Rings (2)
  • Butt Splice (12)
  • CABLE CLAMP (3)
  • Cable conduit to wire fastener (2)
  • Cable Connector (2)
  • Cable hook to wire and rod fastener (2)
  • Cable Tie (84)
  • Cable Tie Mount (18)
  • Cable/Conduit to Stud (3)
  • Cold Shrink End Cap (4)
  • Cold Shrink Splice (11)
  • Compression Lug (96)
  • Compression Splice (7)
  • Compression Splice Service Entrance (28)
  • Compression Tap (15)
  • Concrete Bottom Mount Rod Hanger (2)
  • Conduit and Box Support Fastener (6)
  • Conduit and cable support (2)
  • Conduit and Voltage Marker Cards (3)
  • Conduit cable fastener and support (2)
  • Conduit fastener (4)
  • Conduit to beam fastener (14)
  • Conduit to conduit fastener (3)
  • Conduit to rod fastener (4)
  • Conduit to stud fastener (4)
  • Copper C Taps (3)
  • Copper Split Bolts (12)
  • Corrugated Loom Tubing (5)
  • Covered Single Wire Ferrule (16)
  • Covers (2)
  • Crimp Sleeve Wire Connectors (2)
  • C-Taps (4)
  • DETECTABLE (6)
  • DIN RAIL (1)
  • Direct Burial Splice Kit With Heat Shrink (3)
  • Disconnect (17)
  • Double Primary (5)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • END SECTION (1)
  • Extra Heavy Duty (2)
  • EZ, SELF DRILLING (1)
  • FIXTURE HANGERS MALLEABLE (2)
  • Fork Terminal (7)
  • GAR (16)
  • GAR-BU (2)
  • GB (3)
  • GBM (3)
  • GC (4)
  • GC-CT (3)
  • Gel Tap Splice Kits With Connector (2)
  • GENERAL PURPOSE (13)
  • General Use (2)
  • Hanger (2)
  • Hardware & Rough-In (10)
  • HEAT (2)
  • Heat Shrink Label (17)
  • Heat-Shrink (38)
  • HEAVY DUTY (8)
  • Heavy Duty Mounting Cradle (2)
  • Heavy Wall (16)
  • Heavy-Duty Laminated Lockout Tag (2)
  • HIGH PERFORMANCE (48)
  • IN LINE (2)
  • Inline (6)
  • Inline Splice (5)
  • IN-Line Splicer/Reducer (8)
  • INSULATED (4)
  • Insulating and Splicing (2)
  • Insulation Piercing Connectors (3)
  • Integrated Mounting Hole (5)
  • Intergrated Mounting Hole (3)
  • INTERMEDIATE (4)
  • KC and K2C Series (24)
  • KS (4)
  • Label (15)
  • Label Printers and Labels (4)
  • linerless Ethylene Propylene Rubber (5)
  • Long Barrel - CU Splice (6)
  • Long Barrel - One Hole (27)
  • Long Barrel - Two Hole (20)
  • Long Barrel, Tin Plated (4)
  • Mechanical Grounding (11)
  • Mechanical Lug (9)
  • MINIATURE (4)
  • Molds (2)
  • Motor Lead Pigtail Splice (2)
  • MOUNTING BASE (10)
  • Mounting Hanger (3)
  • Multi Cable (13)
  • Multi-Purpose, Standard (2)
  • NAIL PLATE (2)
  • Natural (5)
  • Natural-Mountable (2)
  • Non-Covered Ferrule (4)
  • Non-Insulated Ring Terminal (7)
  • Non-Metallic Cable Splices And Taps (3)
  • nVent CADDY Cat HP J-Hook System (3)
  • nVent CADDY Speed Link SLK System (3)
  • Nylon Fully Insulated Female Disconnect (3)
  • Nylon Fully Insulated Male Disconnect (2)
  • Nylon Insulated Butt Connectors (2)
  • Nylon Insulated Ring Terminal (3)
  • Nylon Insulated Spade Terminal (2)
  • Offset Entry (3)
  • Offset Pin (10)
  • Panelboard Lug (5)
  • Permanent Acrylic Adhesive (3)
  • PIGTAIL (5)
  • Pigtail Splice (2)
  • Premium (12)
  • Premium Cable Tie (17)
  • Pre-printed Books (5)
  • Pre-Printed Wire Marker Book (4)
  • Printer Ribbon (5)
  • Purlin hanger (4)
  • Push In Wire Connectors (3)
  • Push-In (3)
  • QT-III (25)
  • Rebar Clamp (2)
  • Rejacketing Sleeve (5)
  • Replacement Sleeves (3)
  • Ring Terminal (4)
  • Ring Tongue (4)
  • Rod and wire fastener (7)
  • Rod/Wire (5)
  • Roll-On Splice Kits (2)
  • Rubber Insulating and Splicing (3)
  • Safety Labels (2)
  • SCREW (1)
  • Select Purpose (10)
  • Self-Extinguishing, Heat Shrink (2)
  • Self-Laminating Label (5)
  • Self-Sticking Safety Sign (2)
  • Service (3)
  • Service Post Connectors (8)
  • Servie Entrance Sleeves (2)
  • Short Barrel - CU Splice (4)
  • Short Barrel - One Hole (12)
  • Short Barrel - Two Hole (2)
  • Side Mount Rod Hanger (2)
  • Single (Thin) Wall (24)
  • Single cable hook (4)
  • Single Primary (2)
  • Single Sided Entry (22)
  • SLEEVE (12)
  • Solid Pin (11)
  • SP (3)
  • Spiral Wrap (9)
  • Splice Kit (4)
  • Splicer/Reducer (5)
  • Splicing (2)
  • Spring Nut (3)
  • Square washer (7)
  • Stable (5)
  • Stainless Steel (4)
  • STANDARD (1)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Wire Connectors (4)
  • Submersible Pedestal Connectors (9)
  • Suspension fastener (2)
  • Tag (2)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (10)
  • T-bar fastener and spacers (3)
  • Terminal Block (24)
  • Terminal Block Accessories (9)
  • Terminal block accessory (9)
  • Terminal block relay (2)
  • Terminal blocks (26)
  • TERMINAL KIT (1)
  • Terminals (6)
  • Thermal Transfer Ribbon (2)
  • Thin-Wall Flexible Polyolefin (6)
  • Tin Plated Copper Split Bolt (9)
  • Transformer Lug Kit (2)
  • Twist-On (14)
  • UV Black (3)
  • UV Resistant Black (7)
  • VINYL (18)
  • Vinyl Insulated Butt Connectors (2)
  • Vinyl Insulated Female Disconnect (3)
  • Vinyl Insulated Locking Spade Terminal (5)
  • Vinyl Insulated Male Disconnect (2)
  • Vinyl Insulated Ring Terminal (13)
  • Vinyl Insulated Spade Terminal (6)
  • Voltage And Conduit, Large (3)
  • Voltage And Conduit, Medium (4)
  • Wide Range Tap Connectors (2)
  • Winged Wire Connectors (7)
  • Wire Marker (4)
  • Wire Marker Books (14)
  • Wrap Around Gel Splice Kits (2)
  • Write-On Dispenser with Tape & Pen (4)
  • Y style toggle hook termination and kit (2)
  • Show More...

• Mounting

  

  • 1 (4)
  • 1/2 Mounting Hole (12)
  • 1/2 Mounting Holes (24)
  • 1/4 (3)
  • 1/4 Mounting Hole (6)
  • 1/4 Mounting Holes (6)
  • 1-1/16 (4)
  • 1-1/2 (2)
  • 1-1/4 (11)
  • 1-1/8 (20)
  • 1-11/16 (3)
  • 1-3/16 (2)
  • 15/16 (9)
  • 15/32 (5)
  • 1-5/8 (5)
  • 1-7/16 (4)
  • 17/32 (2)
  • 1-9/16 (7)
  • 2 Mounting Holes (12)
  • 2-5/16 (2)
  • 3/4 (4)
  • 3/8 (4)
  • 3/8 Mounting Hole (15)
  • 5/16 (19)
  • 5/16 Mounting Hole (6)
  • 5/8 (12)
  • 5/8 Mounting Hole (2)
  • 7/16 (6)
  • 7/8 (10)
  • 9/16 (4)
  • 9/32 (16)
  • Adhesive (4)
  • Adhesive Tape (11)
  • Beam (2)
  • CHANNEL (9)
  • Clamp (3)
  • DIN 1-3 (2)
  • DIN RAIL (1)
  • None (28)
  • One screw (2)
  • SCREW (3)
  • Screw-on (8)
  • Self-Adhesive (6)
  • Snap In Mount (2)
  • Wooden Stud (5)
  • Yes (3)
  • Show More...

• Wire Size

  

  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (3)
  • #18 AWG (2)
  • #26-10 AWG (2)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.38 (3)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (9)
  • 10 (14)
  • 12 (4)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (2)
  • 12-10 AWG (18)
  • 12-14 AWG (3)
  • 14 (10)
  • 16 (4)
  • 16-10 AWG (2)
  • 16-14 AWG (16)
  • 18 (6)
  • 1mm2 (3)
  • 2 SOL - 2/0 STR (2)
  • 2/0-14 AWG (5)
  • 22 - 10 (6)
  • 22 - 18 (3)
  • 22 TO 16 AWG (1)
  • 22-18 AWG (12)
  • 24 (2)
  • 250 MCM-6 AWG (13)
  • 3/0-6 AWG (11)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 350 TO 500 KCMIL (MAIN), 4 TO 4/0 AWG (TAP) (1)
  • 4 SOL - 1/0 STR (2)
  • 4-14 AWG (7)
  • 500 MCM-4 AWG (11)
  • 6 AWG (3)
  • 6 SOL - 1/0 STR (2)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • 8 AWG (4)
  • Show More...

• Size

  

  • #10 (5)
  • #12;#14 (3)
  • #14 — #10 AWG Code STR, #12 — #10 AWG Code SOL (4)
  • #2 (1)
  • #2 AWG Class B, C, G, H, I, K, M and DLO (3)
  • #2 AWG Class K and M and DLO (2)
  • #2 AWG Code (11)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (7)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (3)
  • #6 (3)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (9)
  • #6 AWG Code (10)
  • #8 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #8 AWG Code (5)
  • 0.22 x 1.56 es (3)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.75 in W x 21 ft L (6)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 1 in (3)
  • 1 In Conduit (6)
  • 1.00 x 0.34 (3)
  • 1.00 x 0.44 (2)
  • 1.56 in H x 0.22 in W (2)
  • 1/0 AWG Class B, C, G, H, I, K, M and DLO (2)
  • 1/0 AWG Code (3)
  • 1/2 in (13)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (3)
  • 1/2 In, 3/4 In Conduit (3)
  • 1/2 x 1 in (4)
  • 1/4 X 1-1/2 IN Marker (11)
  • 1/4-20 x 1 (2)
  • 1/4-20 x 1-1/2 (2)
  • 12 - 10 (2)
  • 16 (2)
  • 16 - 14 (2)
  • 2 INCH (16)
  • 2.00 x 0.34 (2)
  • 2.00 x 0.44 (2)
  • 2.598 INCH L X 1.071 INCH W X 1.929 INCH H (1)
  • 2/0 AWG Code (6)
  • 22 - 18 (3)
  • 2-25/32 inch (12)
  • 250 kcmil Code (2)
  • 3 MM THK (1)
  • 3/0 AWG Code (3)
  • 3/4 in (4)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (5)
  • 3/8 in (2)
  • 3/8 In Conduit (3)
  • 350 kcmil Code (2)
  • 4.33 in W x 200 ft L (4)
  • 4/0 AWG Class B, C, G, H, I, K, M and DLO (3)
  • 4/0 AWG Class K and M and DLO (2)
  • 4/0 AWG Code (6)
  • 500 kcmil Code (2)
  • 7/16 In Diameter (4)
  • 9/16 in (6)
  • 9/16 In Diameter (2)
  • 9/16 x 1-1/4 in (3)
  • Fine Point (2)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=6.00 - W=3.25 (3)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (4)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.840 - W=1.870 - H=1.870 (2)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=5.50 - H=3.25 - W=2.90 (4)
  • NA (4)
  • Premium (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (21)
  • Thickness - 7mil - Length-66' - Width 3/4" (11)
  • Thickness=.030 - Width=.75 - Length=22 feet (2)
  • Show More...