<P>Inside Right Angle Turns.</P>

<P>For Covering Joint Where Two Pieces Of 800BAC Series Raceway Cover Come Together.</P>

Two Gang Black Powder Coated Combination Carpet and Tile Flange, For Omnibox® and Modulink™ Series Floor Boxes. Flange Is 6 Inch X 9 Inch (152.4MM X 228.6MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii Adapters and Wiremold CM Series Open System Inserts, Sold Separately. Note: Ul Listed For Tile, Terrazzo, and Carpet Floors. Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges.

<P>Flip Lids. Can Also Be Used With A 106 Type Communication Adapter. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges.</P>

Black Powdercoat Duplex Cover Plate, For Omnibox® and Modulink™ Series Floor Boxes. Cover Plate Is 3.290 Inch X 4.310 Inch (83.6MM X 109.5MM). Flip Lids Can Also Be Used With 106 Type Frames For Communications. Note: Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges.

The 880S1 Single Gang Omnibox® Floor Box Provides An Excellent Activation Solution For Applications Where Single Service Is Required In Open Space Areas. The 880S1 Floor Box Is Offered In A Stamped Steel Construction, Designed to Be Installed In Above Grade Concrete Floor Applications and to Meet A Wide Range Of Market Requirements. This Floor Box Series Has Many Applications, Some Of Which Are Schools, Financial Institutions, and Commercial Office Buildings.

Mounts Standard Duplex Devices to Cover. Can Also Be Used With 106 Communication Frames.

6' Plugmold Tamper-Resistant Multioutlet System Black

<P>Designed to Fit and Be Concealed Behind 42'' or Larger Flat Screen Displays. Can Be Installed In Both New Work and Old Work Applications. Has 4 Nema Size Openings For Power, Communication, or A/V Devices.</P>

Closes Off Open End Of 4000 Series Raceway. Has Two 1/2" Trade Size Kos to Facilitate End Feeding. Gray

<P>Your Go-to Floor Box Just Got Better. Resource RFB Series Floor Boxes Are Designed For Maximum Efficiency Throughout An Entire Building, Bringing Versatile Recessed Activations For Power and Data Services to Open Space Areas or Directly to Workstations. No Matter What Size You Choose, Components and Accessories Work Across The Entire Line Interchangeably. Simply Mix-and-Match As Needed For Your Project. Improved Wire and Cable Routing Makes Wire Pulling Much Easier In Adjacent Compartments and Around CO

Combination Device Box, Steel, Ivory, Scuffcoat, 1 Gang, 2-7/8 In Length, 1-3/4 In Width, 4-5/8 In Height, 0.6 LB/Ea

Wiremold 500 Series and 700 Series Raceways Are Ideal For Surface Mounting Small Amounts Of Electrical Wiring or Communication Cables. These Rugged Raceways Offer A Low Profile Appearance Which Blend With Any Decor. Available In Our Exclusive Scuffcoat Finish.

<P>The WMPAC525FC and WMPAC526FC Simplify Flat Panel Installation By Providing An Organized, Recessed Space For Routing Excess Cables and For Attaching Surge Protectors/Power Conditioners. The Addition Of The Flange and Cover Adds An Aesthetic Professional Appearance and Drywall Mounting Capability.</P> <P>Compatible With The PST, Pro, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR, Thinstall, and Fusion Wall Mounts.<BR /> </P>

<P>Can Be Used As Inside Corner Coupling or As Coupling and Straight Thru Fitting. Furnished With One Fiber Bushing.</P>

The Wiremold 2300 Series Raceway Is A Single Compartment Raceways For Communication or Power Applications Ideal For Use In Classrooms, Office, and Hotel Applications or Anywhere A Small Low Profile Raceway Is Needed. The 2300D Nonmetallic Divided Raceway Is For Use When Power and Low Voltage Cabling Is Required In The Same Raceway.

<P>For Right Angle Turns On Same Surface.</P>

<P>400 Series Internal Elbow. For Right Angle Turns Around Internal Corners.</P>

Complete With One-Piece Finish Flange and Conduit Assembly. Conduit Assembly Consists Of One 3/4" Trade Size Conduit and One 1 1/2" Trade Size Conduit. Finish Cover Flange Provided With One 3/4" Trade Size Screw Plug Opening and One 1 1/2" Trade Size Screw Plug Opening. Covers Available In Painted Black (BK), Gray (Gy), Brass (BS), Bronze (BZ), and Brushed Aluminum (Al). Note: Assembled With Scrub Water Gasket. For Use On Tile, Wood or Carpet Floors. Black

For Standard Shallow Switches and Receptacles Including Single-Gang Combination Devices. Base Has Two 1/2" Trade Size Kos. Larger Gang Boxes Available By Special Order. Two-Gang: 4 3/4" L X 4 3/4" W (121MM X 121MM). Accepts Nema Double-Gang Standard Faceplates. Note: Certified to Canadian Safety Standards For Sale In Canada. When Ordering These Products, Change The "V" Color Prefix to "VC" or The "WH" Color Suffix to "WHC" to Denote The Canadian Versions. White